E36 M3 Euro 6 Speed Transmission

[madspeed]

Euro 6 Speed Transmission, comes with tranny, Driveshaft, center bearing and transmission support from a 1997 Euro M3 designed to handle in excess of 320 hp. bolt on fit onto a US M3, 325i, 328i etc. tranny has 65k miles on it. 2400 + shipping. free pickup in Central NJ.

[AlpenWeißM3]

How do the gear ratios compare to the stock E36 M3 5sp?
Also, do you still have the UUC flywheel and M5 clutch for sale with this?
Thanks!

[X2theZ3]

How do the gear ratios compare to the stock E36 M3 5sp?
Thanks!

1-5 are exactly the same. So it's your tranny with a 6th gear.

[madspeed]

Dont have the UUC kit anymore, so you would have to buy a new one.

[Rob Levinson]

The E36 Evolution 6-speed can use the exact same clutch/flywheel parts as the 5-speed. If you have a UUC flywheel and clutch kit, it will work perfectly.

As for the shifter assembly, the UUC Evo3 shifter kit and DSSR for the 6-speed includes everything you need including the carrier and all linkage/bushing parts.

[madspeed]

tnx Rob.... bump.

[X2theZ3]

The Euro 6 speed are getrag units right??

[shim]

The Euro 6 speed are getrag units right??
correct

[madspeed]

bump

[kpolito99]

Are you perhaps interested in trading for a 5 spd to replace the unit in the vehicle from which the 6 speed was removed? Do you know if this this box would fit into a 2002 325i? Thanks.

[PAFFERV]

< also have a E36 6 speed trans with a bad bell housing, any takers?

[X2theZ3]

< also have a E36 6 speed trans with a bad bell housing, any takers?

what's wrong with the housing?

[übermäßig M3]

I'm interested in this. But the million dollar question... how much to ship to California?

Thanks,

[X2theZ3]

I'm interested in this. But the million dollar question... how much to ship to California?

Thanks,

Shouldn't be more than 100 bucks.

Try DHL

[madspeed]

I'm interested in this. But the million dollar question... how much to ship to California?

Thanks,

yup, shipping should be about a 100 bucks. anything more than 100 and ill take care of it.

[M3andPorsche]

What diff gearing was used in the Euro M3? Also, what drive shaft flange is on the DS, 4 bolt or 6 bolt? Was this ever installed in a US car? Thanks.

Dave

[madspeed]

Not sure what the diff gearing is. its a 6 bolt flange. it was'nt installed on a US car but I have a similar unit on my car currently if you wanna see it and the 6th gear is awesome. by the way I also have the Euro Evo Diff if anyone wants to buy it.

[übermäßig M3]

Thanks for the shipping info. Some other questions...

If you don't mind me asking, why are you selling it?
Are there any problems with this tranny or associated parts?
Comes with *all* parts to bolt directly on my US 1998 E36 M3?
How will I know I wont get ripped off?

[docjavier]

Thanks for the shipping info. Some other questions...

If you don't mind me asking, why are you selling it?
Are there any problems with this tranny or associated parts?
Comes with *all* parts to bolt directly on my US 1998 E36 M3?
How will I know I wont get ripped off?
+2

[Boosted2003]

I believe they use 3.23 gear.

[madspeed]

Thanks for the shipping info. Some other questions...

If you don't mind me asking, why are you selling it?
Are there any problems with this tranny or associated parts?
Comes with *all* parts to bolt directly on my US 1998 E36 M3?
How will I know I wont get ripped off?

comes with tranny, Driveshaft, center bearing and transmission support - this is exactly whats included with the kit. You will need to either buy the shifter assembly from the dealer or the upgrade kit from UUC motorwerks, your call. there is absolutely no issues with the tranny or the parts.

I bought a Euro 3.2 engine and a 6 speed tranny and ended up not using it. so im selling it all. I already have one in my car if anyone wants to come on down in NJ to see it.

As for how you'll know you wont get ripped off, you can ask any forum member from the NJ area to come on down here and inspect the unit and make sure I am for real. If you have a friend in NJ, you can have him pick it up. no bull.

[atlantisvip]

I had a bitch of a time finding a replacement auto tranny for my 92 325i.. Something about that year having a very specific replacement.. Other trannies would not line up with the bolts or something.. I want to do a manual swap now.. Would this tranny bolt right up ?

[madspeed]

I had a bitch of a time finding a replacement auto tranny for my 92 325i.. Something about that year having a very specific replacement.. Other trannies would not line up with the bolts or something.. I want to do a manual swap now.. Would this tranny bolt right up ?

As far as I know it should line up correctly. Ive never heard of such a situation but then again, Im hoping someone can chime in with the 92 thing. by the way, the 92 is a an excellent motor. I had one many years back and I still miss the 5000 to 6000 rpm punch.

[atlantisvip]

As far as I know it should line up correctly. Ive never heard of such a situation but then again, Im hoping someone can chime in with the 92 thing. by the way, the 92 is a an excellent motor. I had one many years back and I still miss the 5000 to 6000 rpm punch.


Thats cause the only punch in my engine is around the 5600 mark ! HAHAHA ! No really, the low end sucks balls on this car..