It was a good day at MIR! I finally nailed my 9 sec pass!!! Big thanks to Sean Ivey again for making great power and keeping the motor together. I was hot lapping the car several passes in a row while I was trying to get the launch dialed in and the car trapped 144-146 all day long with horrible short times. The car either bogged badly due to a super sticky track or spun badly due to the street tire cars dragging water up the track.
I figured out my problem and got back to it's 1.5X 60' and let it rip. The end result was 9.92@145.52 mph. I was on the limiter before the traps on the 9 sec pass because I forgot to raise the limit on the MSD box in addition to the AEM. I swung back around after a few more changes but unfortunately I broke a diff output flange on the launch.
video- http://media.putfile.com/Radowski-9-Second-Pass
timeslip below:
97 M3 - 8.94@164 - 8 sec street machine, all BMW driveline, factory ECU
02 M3 - 9.74@145 - Maximum PSI stage 2 turbo kit, stock motor, factory ECU
16 M3 - 9.3@151 - Built motor/twins
15 M3 - 9.2@162 - Built motor/single turbo/Ecutek
BMW SOB's turbo E30 - 8.72@158.39
follow our latest builds and upcoming events! - facebook.com/maximumpsi - instagram.com/maximumpsi
so sick dude, all the hard work paid off...congrats!
CP Pistons
Eagle Rods
T67 Turbo
Lots and lots of custom goodies and 666 fab schtuuufff
05/01/07 RIP pops
Just crazy. Congrats. Keep 'em comin.
95 M3, 5.3 LS, PTE 7675CEA, TH400/Gear Vendors OD
10.4@136 Pump gas at 3530lbs.
Build thread
http://www.bimmerforums.com/forum/sh...LS-Turbo-build
Congrats Mike!!!! very well deserved!!!!
Well done!
Nice work! That is an amazing accomoplishment!
93 325is: obd2 M52, 22rpd tuned, 6266, RSI manifold, 555whp on 18psi
GARDEN STATE REPRESENT!!!!!!
HELL YEA MIKE YOU THE MAN!!!
many congrats!
ot. can you pm me your new shop address? i wanna swing by sometime
-Mike-
BUY MY FORGELINE WHEELS!
ridiculous! congrats
great job mike, nice to see the first 9 sec bmw from jersey. now finish tightin stuff up, finish building the cage n go to englishtown so i can see that in person. CRANK THAT SHIT UP lol mid 9's maybe. goodluck
Very very nice ...... I am very impressed. Will be coming to you for my top mount E30 M50 turbo kit next summer !!!
Congrats again.... Man that looked like quite a ride... must have been fun and so very rewarding.
Michael R
1986 325es
93 M50B25TU motor swap ( now 2.7L with 87mm bore)
95 M3 cams
Balanced and Blueprinted
lower compression -( Via CP 9:1 pistons)
VAC goodies - Stage 2 head/ARP/Dual valve springs
( motor is curently having issues low comp in # 6 with only 1000kms on it - suspect bad MLS )
Going GT35R turbo once I have time to fix it!
E-town this Wednesday night.
97 M3 - 8.94@164 - 8 sec street machine, all BMW driveline, factory ECU
02 M3 - 9.74@145 - Maximum PSI stage 2 turbo kit, stock motor, factory ECU
16 M3 - 9.3@151 - Built motor/twins
15 M3 - 9.2@162 - Built motor/single turbo/Ecutek
BMW SOB's turbo E30 - 8.72@158.39
follow our latest builds and upcoming events! - facebook.com/maximumpsi - instagram.com/maximumpsi
Congrats! That is awesome, now you have to update your sig
99 MC Imola/Blk 136K miles (SOLD 01/2011)
Currently driving 2005 Scion xA
Mike,
It was great working on the project with you. You are one dedicated guy and the hard work paid off, pushing the keys was the easy part, you had obstacles and you got over them.
I think if you really run at 100% power you will go deeper into the 9s, it does look so smooth going down the track, effortless almost.
It is very odd to me that with the amount of HP you make you are going this fast yet there are other cars with much higher hp that have not run close, these cars seem to have very good drivetrains that can handle 9 sec passes :-)
Big Congrats MR FIRST E36 IN THE 9s!!!
Sean
Iveytune.com
Tuned the worlds (US) fastest e36 street car, 9.92@145, ac, ps, leather....... :-)
way to go man... that is truely awesome.
-Seb
Breaking diff flanges! Haha, I bet the BMW engineers never saw that one coming!
Congrats buddy. Nicely done.
Congratz Mike...awesome achievement
Don
Congrats Mike!
10.0 @ 138 on stock block (Quickest and Fastest 55)
Built motor 9.6 @ 146
simply incredible. Congratulations Mike!
Awesome launch too!
Active Autowerke C38 stage 2 on 95 dakar yellow M3, 30k miles
.080 mls headgasket, ARP headstuds and obd2 valve retainers; Stewart water pump; Dunlop Z1's on staggered CSL's.
387whp, 296wtrq --- girls dig dakar
Hot lapping is hardcore - congratulations
It was Ulysses' coolant bleeder screw and a quart of Mobil 1 from Donovan that pushed the car into the 9's!
Congrats on the new times and Donovan's axle destruction! They are both getting a little too close for my liking. Time to push the silver bullet a little harder.
97 M3 - 8.94@164 - 8 sec street machine, all BMW driveline, factory ECU
02 M3 - 9.74@145 - Maximum PSI stage 2 turbo kit, stock motor, factory ECU
16 M3 - 9.3@151 - Built motor/twins
15 M3 - 9.2@162 - Built motor/single turbo/Ecutek
BMW SOB's turbo E30 - 8.72@158.39
follow our latest builds and upcoming events! - facebook.com/maximumpsi - instagram.com/maximumpsi
Congrats Mike!!! All of the hard work and dedication payed off!
Bookmarks