••ü•• Some Specials for 5ers

[umnitza]

We've got some M5 bumpers - just like our E36 bumpers made of PolyPropylene.

Currently, we have one for testing that we just brought into stock. However, we're going to do a group buy for the first 20 participants - $350 shipped for them.

What is Polypropylene or PP?
Polypropylene (PP) is a linear hydrocarbon polymer, expressed as CnH2n. PP, like polyethylene (see HDPE, L/LLDPE) and polybutene (PB), is a polyolefin or saturated polymer.

Polypropylene is one of those most versatile polymers available with applications, both as a plastic and as a fiber, in virtually all of the plastics end-use markets.

Automotive use
In the automotive sector PP is utilized as a monomaterial solution for automotive interiors. The monomaterial dashboard is becoming increasingly achievable, PP film cushioning, film skins, and powder slush molding and even blow molded parts with integral PP textile covers are emerging.

Bumpers, cladding, and exterior trim are also available manufactured from polypropylene. Polypropylene developed for such applications provides low coefficient of linear thermal expansion and specific gravity, high chemical resistance and good weatherability, processability and impact/stiffness balance. Improvements with color-at-the-press and pre-colored PP have also reduced or eliminated the need for painting in some applications.

PP does not present stress-cracking problems and offers excellent electrical and chemical resistance at higher temperatures.

We've sold over 100 bumpers for the E36 crowd and you guys should also benefit. The $350 is a SHIPPED price for these bumpers and if you want fogs, we can add those for $49 more.

It also includes grills, molding, and the mounting for the fogs.


================================================== ======

Also, we'd like to offer the beginnings of a Projector39 group buy for you guys.

We have 3 people on board in another forum already, but if we get 20 people, we'll do $399 for the Projector39s pricing ($469 retail).



================================================== ======

aFe Intakes are now available on our site, the pricing is standard MAP pricing, but we can lower the price by 10% ($35 savings) if we get 10 people signed up. 15% if we get 20 people.



-----
Bumper pricing is revised $379 + shipping - $40 flat rate.
So total bumper with fogs SHIPPED is $419.

[e39dream]

dear umnitza- can you provide me a mailing address so I can send you a money order for the 400? I would be sending payment at the end of the week. perfect timing for this BTW!

[Vortec4800]

Do you have any aFe intakes for the 540 or just the M5?

[umnitza]

Sure, it's on our web site - shipping and returns.

But the $400 will be + shipping Also, we need to make sure we have 20 people first, otherwise, we won't be able to do the deal. It's very labor intensive to build out these lights and we need a break from DEPO for the shipment to offset the price drop.

[umnitza]

Do you have any aFe intakes for the 540 or just the M5?

of course we do:
http://www.umnitza.com/product_info....oducts_id=1137

[pkdtran89]

Sick...was looking to do the p39s as my next upgrade. First I gotta fix the area above the bumper but under the trunk...someone hit and run me while i was parked...3 small dents in that strip and i cant properly close my trunk...hopefully doesn't cost too much $$$, but it looks to be part of the actual body.

Anyways...is it possible to get smoked corner reflectors for the p39s, and how much would would it cost to add in 6000K HIDs?

[xbmx89]

well im in. prob make a payment this week so better save me a spot

[umnitza]

thanks guys for such a warm reception...on a weekend no doubt.

PDK - yes, the Xenons can be added to the P39s, but smoking will cost a lot of dough, because it's possible but to make it look good, we have to pay a quality shop to smoke the reflectors and it's not recommended as it will possibly remove the seal quality of the lights.

[xbmx89]

how do i make a order for the bumper?

[PJB]

Hello Umnitza: I sent you guys an email through your "Contact Us" page about the Projector39s on a 2000 e39 528i with factory HID. I'm interested in signing up.

[WheelsDirect]

please tell me you are going to offer the rear bumper too???

[umnitza]

how do i make a order for the bumper?

Let's get a list together, I will make an order with our supplier for 20 of them and have them here in less than 1 month.

Hello Umnitza: I sent you guys an email through your "Contact Us" page about the Projector39s on a 2000 e39 528i with factory HID. I'm interested in signing up.

Will reply shortly.

please tell me you are going to offer the rear bumper too???

Which kind, please show pictures.

Once again, thank you for the warm reception.

[WheelsDirect]

just the stock M5 rear bumper - hard to find a good aftermarket version and the OEM one is just so damn expensive

[umnitza]

but I'm not sure a stock bumper will look good with the exhausts you guys have. or am I missing something?

[WheelsDirect]

but I'm not sure a stock bumper will look good with the exhausts you guys have. or am I missing something?

well there are only 2 versions - the stock M5 rear bumper has left and right cutouts for exhaust and the M-Tec version which only has the left cutout. The only difference between the 2 bumpers is the insert as shown here..

M5...


and M-Tec..

[e39dream]

I would eventually like the mtech rear as well- one thing at a time though

[MTouring]

can i just buy the fog's?

[thano]

everyone complains that no one is providing an mtec rear bumper for our cars, yet i only had 3-4 people add their name to the list i made in the group buy forum.

i'll try again.

interest list for REAR M5/MTec bumper.

1. thano
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.

[M5.4.LyF]

How much is the rear M-tech bumper if you have one Umnitza? I would be extremely interested man.

[jusdrake1]

Put me down for the interest list for the rear.

[PJB]

Sign me up for the Projector39s!

707 area code but West Covina zip code!

[WheelsDirect]

i will take a M5 rear bumper but of course would be good to know around what price it will be

[umnitza]

can i just buy the fog's?

Yes.

everyone complains that no one is providing an mtec rear bumper for our cars, yet i only had 3-4 people add their name to the list i made in the group buy forum.

i'll try again.

interest list for REAR M5/MTec bumper.

1. thano....
20.

Right, well, 20 people would be good.

How much is the rear M-tech bumper if you have one Umnitza? I would be extremely interested man.

Until we find out, we won't know. Probably as much as the bumpers.

Put me down for the interest list for the rear.

Please put your name in the list Thano started.

Sign me up for the Projector39s!

707 area code but West Covina zip code!

Sorry about this, but we should mention that shipping and applicable taxes are extra.

i will take a M5 rear bumper but of course would be good to know around what price it will be

right, please put your name on the "thano" list.

[xbmx89]

wat bout the front bumper?

[thano]

nice talking to you today, can't wait for the hellas and tails to come in the mail. mega stoked.