Dyno shops in South Jersey?

[Stan Vaddi]

Does anyone know of any shops in South Jersey with a dyno???

I'm in Haddonfield, within 15-20 miles of Philadelphia. Any shops near Atco Raceway?

Thanks in advance!

[Stylin]

Silverstreak had his car dynoed down there some where.. Im sure he'll jump in soon when he sees this thread.

[SilverStreak]

Hi Stan! Welcome to BimmerForums! I knew a shop down in Atco, but in the last month they have gotten rid of their dyno, and the place they refer business to has since gotten rid of theirs too... :

Anyone else know of any reputable dyno shops in South Jersey??

[Stan Vaddi]

Thanks for the welcome, impressive #'s you've got there!

Does anyone know of any shops with a dyno in and around South Jersey???

[SilverStreak]

Thanks, Stan.

Anyone knows of any local shops for Stan? Maybe some in Philly, even?

[Bimmerhead]

I know of three. Two are in the western suburbs of Philthadelphia.
AWE specializes in Audis but they just installed a new Mustang Dyno
AWE Tuning

And Cyntex Racing
Cyntex - West Chester, PA - (610) 738-8804
No web site for Cyntex, however Paul Schwatrz (owner) is VERY highly regarded among the Porsche crowd for his abilities in tuning, race prep and engine building.
Baby has been dynoed there on his Mustang dyno three times.

As a matter of fact Cyntex will be where the dyno tuning for Baby's more vicious phase of mods will be done. I trust Paul and Tony Salloum of VAC Motorsports with this important job.

The third is Helix Minisports. They specialize in Minis. According to their web site they have a Mustang Dyno. I don't know anything else about them other than I saw their name in conjunction with a dyno day in Philly a few weeks ago. Helix MINISports

The only thing I can suggest about dyno readings is to choose a shop and stick with that shop and their dyno so the comparison of readings surrounding your mods will be valid.
Comparing a Mustang Dyno readout to a DynoJet readout is a complete waste of time.
If you baseline on a particular dyno, all subsequent runs should be on that same dyno. Thats the only way to see if the mods had any effect.

Regards,

[m3ltw98]

Chuck Stickley uses Cyntex for all of his dyno tuning. There dyno shows VERY low numbers when compared to a place like ERT. I remember Chuck telling me that his race car would put down 315rwhp at ERT but around 260-265rwhp at Cyntex. When I had him put in the euro hfm, euro intake, ss headers, ss exhaust, injectors and custom chip, it put down 202rwhp. This is low cause of the dyno. PhastM3 also had his 3.2 OBD1 car w/ cams dynoed at Cyntex and put down 209rwhp. I recall Chuck telling me that my car was putting down 280-285hp. So dont be alarmed if you go to Cyntex and see lower readings then what you are accustomed to. Thanks. Later
Jared Sedacca

[BruceY]

I once had work done at an auto repare shop that had a dyno. Dont recall the name but it was in Phila at the corner of Tabor Rd. and Front st. This is located in the olney section of Phila and is about 5-7 blocks north of Rt 1 sorry buts thats all the info I have.BruceY

[Stan Vaddi]

Differences in Mustang vs Dynojet??? Which one will provide the more accurate reading? Which one generally provides the greater #????

Thanks guys!

[black99]

Friends of mine have a brand new dynojet at their shop which is located in Bound Brook NJ. About 45 min away from philly. If anyone needs dyno time or if you guys want to set up a dyno day let me know and I can get something going. E-mail me ulrich27@aol.com

[SilverStreak]

Can you post the name, address and phone # of the shop for all of us to see?

[black99]

Bmtranny.com ask for Mark and tell him BLOCK HEAD sent you.

[steve m3]

Dave, there is a shop on cross keys road in Berlin with a dyno. I'm not sure of the name but if your the area check it out. If you need directions PM me. Steve

[SilverStreak]

Berlin would be awesome! I go to Berlin once a week for new comics...

[m3ltw98]

I feel a dyno day coming with the dyno shop in berlin. Anybody up for it? I would definately be interested. Later

[black99]

Let me know what the shop in Berlin will charge you guys or what do they charge normaly maybe I can get you a better deal.

[SilverStreak]

Maybe a group rate?

[black99]

Dave find out what the place in berling would cost you guys for the day and I'll see if maybe I can do better.

[steve m3]

If you guys don't know where the shop is in Berlin here are some directions. Coming from route 73 or 561, take both of them to the Berlin Circle. Enter the circle and hop on cross keys road( you will want the Oldies MCdonalds on your left when you leave the circle. Follow that road and you will come to a light with a KING of PIZZA on your left. That is the intersection of Cross Keys and the White Horse Pike. Cross the intersection and about a mile down the road you will come to another light. There will be a WAWA on your left and a Mobile on your right. Cross the intersection and a few hundred feet up the road on your right hand side you will see a newer looking building with a sign out front that says (DYNO YOUR HOTROD). If you have any ?'s about the directions PM me. Steve

[SilverStreak]

Thanks, good info. Does anyone know the guys at the shop Berlin well enough to feel comfy to inquire about a Group Rate?

[KingKong]

Ha ha! I hope this Berlin dyno shop turns out good.

[bob(NJ)]

Steve, i've seen that shop on cross keys road, used to pass it every time i had an ice hockey game in washington twp. Looked kinda ghetto but i always wondered if it was a good shop

[SilverStreak]

Anyone know the name of this shop in Berlin? The Phone #?

[E36RACER]

I've heard mixed feedback over the years about that place in Berlin. Friends that had S/C Mustangs used to go there and said they weren't too happy with the facility. I don't know from personal exp. though. But if a group is going I'm in. Let me know

[steve m3]

Originally posted by bob(NJ)
Looked kinda ghetto but i always wondered if it was a good shop

Yeah Bob, I dont no anything about the shop, i just no there is one