Parting out the 525i

[TreyG]

It is a 93 525i with 138k miles. The car has everything except wheels. I am parting it out, everything must go. Make me an offer. All will be considered.

[Fastx525ixGuy]

I know its a small request, but you wouldnt sell me the plastic piece of bumper trim that runs along the back, as shown in this pick, would you??

[TreyG]

Offer ?

[TreyG]

I will also trade parts.

[TonyC2639]

It looks pretty clean...what's wrong with it?

[Mless5]

How much for front bumper?


Thanks.

[TreyG]

Everything powers on in the car, some of the windows dont roll up but the motors work. The car does not do anything when you turn the key. As it sits the valve cover needs to be fastened down. I purchased new spark plug seals. The only part of the gasket set you need is the actual valve cover gasket. I have pictures of the drive train also. I was given a vague description of the problem and purchased the car because I was in need of the wheels and tires. I can offer the whole car if wanted. Make an offer.

[Striker169]

Can you take pictures of the door pannels all of them and the arm rests? and would these fit in a 535i?

[Mless5]

$100 for front bumper

[TreyG]

Sure. I'll take more pics as soon as possible.

[c21007]

I need a check control module if it will work in a 1995 525i. (That's in the fuse box) It wiill have CCM 61.35-2 942 287 on it.

And also drivers side floor mat if it is OK. Thanks! swilcox@lycos.com

[TreyG]

I need a check control module if it will work in a 1995 525i. (That's in the fuse box) It wiill have CCM 61.35-2 942 287 on it.

And also drivers side floor mat if it is OK. Thanks! swilcox@lycos.com

PM me your offers.

[flyeryan]

is the trim from the front to rear wheels good? I'd be interested in that.

[flyeryan]

oh, and the right rear door handle too...

[TreyG]

The car is in great shape, no body damage at all. All the trim is great.

[e39dream]

can you throw in a goat? just kiddin

[TreyG]

rofl, hell yes. goats are buy 1 get 1 free. 100 bucks.

[streetknight]

check pm for oil pan

[Fastx525ixGuy]

Im not much of a bargainer, so name your price. Im not desperatly in need of it, but if youve got a decent price, I could be in

[TreyG]

30 bucks shipped and it's yours.

[Fastx525ixGuy]

That sounds good, is it in good condition? As long as theres no cracks or heavy scratches, im interested

[QuorumCall]

I need the "oil suction pipe," part #6 below. 20 bucks shipped?

[HE53]

I need the "oil suction pipe," part #6 below. 20 bucks shipped?

DO you realise that is inside the oil pan.... Pull an engine to sell someone a $20 used part.

[abakos]

I need a gauge cluster...$50 shipped to 37918?

I also need a washer pump for the headlight washer system, they're unfortunately very common, but if you have one it's the pump that sits higher on the reservoir tank. Let me know if you have one and can get it out without breaking little tubes off.

[QuorumCall]

DO you realise that is inside the oil pan.... Pull an engine to sell someone a $20 used part.

No, I thought it was in the glove box. Maybe he already pulled the engine and was parting it out anyway and it was just lying around. I guess the "all will be considered" thing must have thrown me off. Thanks for your help though.