![]() |
|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read | |
| TireRack Garage | Homepage | Supporting Vendors | Articles | Online Store | Photo Gallery | Forum Rules | Advertising |
| 1991 - 1999 (E36) (1991 - 1999) The first modern 3 Series, the E36, was the model that paved the way for the 3 Series to be named "Car of the Year" every year since the model was driving off showroom floors. Radically redesigned in 1992, the E36 was not the same 3 Series as the E21 and E30. Larger, less boxy in design, and equipped with a dual overhead cam engine, multilink rear suspension, and a more finished interior, the E36 balances sport with luxury. |
![]() |
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
$240 for a 4 wheel alignment!!!???
After installing H&R sport springs with Koni's its time for a 4 wheel alignment. So here are the quotes thus far:
$tealership: 169.00 Independent: 240.00 Estimated Cost from BMW Buddies: ~100.00 I haven't paid for one of these before. What should this cost? I"m pretty pissed at my independent for quoting it so high. Any help would be great thanks!
__________________
SOLD!
<img src="http://www-personal.umich.edu/~rshuchma/images/bmw4.jpg"><font size="-2"> |
|
#2
|
||||
|
||||
|
Damn! Lisa's 318ti is over at the local $tealer getting an alignment done right now, $79.
__________________
|
|
#3
|
||||
|
||||
|
NTB is $89.99 with a 6 month warranty
__________________
1998 528i
Aspen Silver w/Gray interior Completely stock (at least for now) --------------------------------------------- 1992 325i (For Sale) 150K miles Bilstein HDs, Dinan chip, K&N |
|
#4
|
||||
|
||||
|
80 to 120 is a fair rate.
240 is insane. . . I can almost get my car aligned and cornerbalanced for that.
__________________
Older Whiskey
Younger Women Faster Cars More Money Evo X, daily driver Porsche 964 3.6 Turbo, Bad Boy F250 7.3 PSD, tow vehicle BMW M3 LTW, Bimmerworld S54 conversion, Track Car past: Porsche 997 GT3, Ferrari Modena 360, Porsche 997S, Porsche 996 GT3, Porsche 996 C4S, Porsche 996 C2 aero, BMW 97 M3/4 and 95 M3, S2000, X5 4.8is
|
|
#5
|
|||
|
|||
|
Re: $240 for a 4 wheel alignment!!!???
Quote:
![]() |
|
#6
|
||||
|
||||
|
that is a lot of money. i can see the stealer being a lot, but if bimmer95 can get it for 79, i cant see y u cant either. most places are around the 90 mark and under
__________________
![]() M3 cams *UUC stage II lwfw w////M5 clutch *JC cam & lwfw chip *ECIS intake *Bosal cat back *UUC udp's *M3 3.15lsd *M3 shifter *H&R & Bilstein sport *E46 M3 rsm *Z3 rein4c plates *Depo DDE's *Zender lp *M3 spoiler *M3 moldings * M3 mirrors *billetwerks *jbl/mtx sub system '04 G35 sedan 5AT all stock |
|
#7
|
||||
|
||||
|
i had mine done at a shop
right after i put on the bilsteins and springs.....for $60 bucks and they didnt do it right......i know that cause when i got BBS RK's i had it aligned at the stealer for $90 and they did it perfect.....the car tracked perfectly straight.......and felt great.....
i say go stealer for alignment....esp if you car is lowered |
|
#8
|
|||
|
|||
|
I called another $tealer in the area and they quoted me the exact same price. I am gonna call another place. I would rather pay full price and have it done right once. But I still feel that much over $100 is just stupid.
EDIT: Toledo BMW will do it for $125 but its 45 min each way ![]()
__________________
SOLD!
<img src="http://www-personal.umich.edu/~rshuchma/images/bmw4.jpg"><font size="-2"> Last edited by Ryan325i; 05-07-2002 at 02:57 PM.. |
|
#9
|
||||
|
||||
|
mine was $99 for 4 wheel.
that's about right...somewhere in that price range. what you were quoted is crazy ![]()
__________________
...'Cause every hand's a winner and every hand's a loser.
And the best that you can hope for, is to die in your sleep' |
|
#10
|
|||
|
|||
|
Be carefuly with indepedent shop because they may not have the right set-up for alignment.
I heard that the BMW alignment can't be done by any shop. BMW has set-ups such as adding weights to the driver/passenger/rear seats ... I can be wrong but I heard it from a guy at Sears who refused to do it when I purchased/installed 4 new tires for my 87' 325 bimmer. |
|
#11
|
||||
|
||||
|
most dealers don't do it that way either.
I know the dealers around here do it for 129-100 for any bimmer. consider that when I go to most a-hole private shops, they look at the car and say, I'll have to bill you by the hour for that. It's a custom Job." F- That! Dealer, they'll do it right...if not, you can pester them to do it again. Private shops will give you the run around. beware that some dealers don't do their own alignments but send them out to those same private shops. -Ron
__________________
![]() (413 whp / 365 tq) x 13 psi + street tires = broken driveshaft ![]() |
|
#12
|
||||
|
||||
|
i failed to get an alignment after my suspension upgrade and my front tires took the hit. i dont see just because its a bmw that specialty shops can only get it done.
__________________
![]() M3 cams *UUC stage II lwfw w////M5 clutch *JC cam & lwfw chip *ECIS intake *Bosal cat back *UUC udp's *M3 3.15lsd *M3 shifter *H&R & Bilstein sport *E46 M3 rsm *Z3 rein4c plates *Depo DDE's *Zender lp *M3 spoiler *M3 moldings * M3 mirrors *billetwerks *jbl/mtx sub system '04 G35 sedan 5AT all stock |
|
#13
|
||||
|
||||
|
i just called John roberts BMW in dallas and they quoted me $149 +tax, another european speciality place by the name Autoscope quoted me $113.
__________________
![]() ECIS CAI|||JC Chip|||Bosal Exhaust|||Koni w Eibach Pro-kit|||GC RSM|||X-brace|||UUC stg 2 FW w E34 M5 clutch|||M3 shifter w illuminated ///M knob|||UUC TMEs|||Depos with 5000K HID |
|
#14
|
|||
|
|||
|
Thanks for all the great feedback!!
Rahul - get ready for a new car after your weekend. Bimmer95 and Oxcart installed my xbrace and suspension with as much help as i could provide. All I can say is the car eats corners for dinner.
__________________
SOLD!
<img src="http://www-personal.umich.edu/~rshuchma/images/bmw4.jpg"><font size="-2"> |
|
#15
|
||||
|
||||
|
i went to wheel works...asked for a front end alignment, he said "70, where is ur car?" i pointed at my car, he was like "oh wait..thats gonna be 80"
![]()
__________________
2006 TiAg/Black 330i 6MT ZSP ZPP |F1 Pinnacle 15%|Debadged|Mtec Cosmos Fogs|Hamann Style Diffuser|Quad Magnaflow Exhaust|Transmissive Polarizer Mod
:|Silver CF Amber-Gone|MTech Dead + ACS Pedals|
|
|
#16
|
||||
|
||||
|
Quote:
i can't wait till i get the suspension done !!!!! i have an autoX on saturday and if i have the shocks/springs/alignment done b4 that i hope to kick a$$ in the autoX . plan to do X-brace on sunday as my friend is gonna help me do it, he has a 95 M3 and we ordered the x-brace together - $110 from pacificbmw ![]() can't wait !!!!!!!!!!!!! later....
__________________
![]() ECIS CAI|||JC Chip|||Bosal Exhaust|||Koni w Eibach Pro-kit|||GC RSM|||X-brace|||UUC stg 2 FW w E34 M5 clutch|||M3 shifter w illuminated ///M knob|||UUC TMEs|||Depos with 5000K HID |
|
#17
|
||||
|
||||
|
Wow here it costs $35 for a two wheel alignment and $45 for a 4 wheel! I guess living in the boonies has some advantages after all.
Same place also installed my coilovers for $200 for several hours worth of work (and an alignment).
__________________
http://www.dtmpower.net/ppost2/data/500/205dsc_3011_copy.jpg - this host does not allow image linking
Pictures of my car |
|
#18
|
||||
|
||||
|
Re: $240 for a 4 wheel alignment!!!???
Quote:
You CAN deffinetelly find a place for $100 or less.
__________________
1995 BMW318ti (sold)
2006 Acura TL A-Spec (sold) 2006 Mercedes CLK-350 (sold) 2006 BMW 330Ci (SP, CP, 6SP, UUC Evo3, Orion V2, ACS Lip) (current) 2007 Suzuki GSX-R 1000 (current) http://www.automotive-diy.com http://www.moneyweblink.com |
|
#19
|
||||
|
||||
|
Quote:
is it OK to get the wheel alignment at places like NTB ??? i dont want to mess up my car just save $40-$50 !!!
__________________
![]() ECIS CAI|||JC Chip|||Bosal Exhaust|||Koni w Eibach Pro-kit|||GC RSM|||X-brace|||UUC stg 2 FW w E34 M5 clutch|||M3 shifter w illuminated ///M knob|||UUC TMEs|||Depos with 5000K HID |
|
#20
|
||||
|
||||
|
Quote:
__________________
![]() (413 whp / 365 tq) x 13 psi + street tires = broken driveshaft ![]() |
|
#21
|
||||
|
||||
|
Quote:
__________________
1995 318i
|
|
#22
|
||||
|
||||
|
Alignment is almost an art. Someone could do it and see that numbers are more or less within specs and say it's aligned, or you could spend days on it trying to get the 2nd decimal place balanced between left and right caster, for example. I would suggest going into a few places and talking to them to see how much they really know, how much time they're willing to put in, etc. Of course, if you only care about more-or-less even tire wear, then you can go take it to any inexpensive shop. But the guy might tell you that they couldn't get the car to spec because it's not adjustable...
|
|
#23
|
|||
|
|||
|
well i'm going to the $tealer on Monday. I got them to take 10% off. I told them their prices are outrageous based on feedback from around the country. Their response was basically "we don't give a shit." I called 3 other places. Most replied that they didn't have the correct data to do it --- or that they could do camber but not toe.
At least i got my MP3 player installed today ![]()
__________________
SOLD!
<img src="http://www-personal.umich.edu/~rshuchma/images/bmw4.jpg"><font size="-2"> |
|
#24
|
||||
|
||||
|
Quote:
|
![]() |
| Bookmarks |
| Thread Tools | |
|
|