their are Four pricing catagories.
1. Complete bolt on turbo kit $5,000:
Chris man top mount manifold.
Brand new Billet 6262 Journal bearing turbo OR Billet 6766 journal bearing turbo.
45mm turbosmart wastegate
3" intercooler piping. From Turbo to throttle body
Intercooler 24x12 4" thick core
Stainless steel oil feed line and fittings.
Stainless steel oil return line.
3" custom downpipe
Tial Q Bov (Black color)
60 OR 80lb injectors
Blow through maf
Turbo tune.
2. Same as 1 but NO turbo $4,000
3. Same as 1 but no injectors, No maf, No tune $4,000
4. Same as 1 but NO turbo, No injectors, No maf, No tune $3,000
here are some pictures of the kit when the kit was ran with my old 76mm turbo on my yellow car.
RK tunes
I think I asked before and I think you told me no, but would you sell the fuel rail/fuel line setup?
Bump for a great deal/great seller/great tuner.
Hi 5
“If liberty means anything at all, it means the right to tell people what they do not want to hear.”
― George Orwell
PM'd
How much power does this kit make with the 6766 at around 20 psi? How much power does the 76mm turbo make? Any dyno graphs?
The 76mm made 636whp.
This kit with a standard 35r makes 515whp at 17psi on a 2.8
With a billet 6262 it should sit around 550whp at 18-20psi.(based on other similar 6262 cars I have tuned
With a billet 6767 It should break 600whp on pump gas at 18-20psi. It may even hit mid 600's
Yes. Id sell the whole fuel system
PM me for pricing
Last edited by RK-Tunes; 01-04-2013 at 06:50 PM. Reason: Automerged Doublepost
RK tunes
Bump a friend.
PM'd
AZ 51 STEP GRAD.
Bump
OLD
E30
636whp
1/4 mile: 10.91@144.38
http://www.youtube.com/watch?v=L_f7fUVqblI
NEW BUILD
335d
520whp
635wtq
120.51mph trap speed
Bump hi 5
“If liberty means anything at all, it means the right to tell people what they do not want to hear.”
― George Orwell
The tune is for s52 or m52?
it can be adjusted for any engine. M50, S50, S52, M52.
JUst let me know before i ship it out.
RK tunes
Bumppp. Should also add selection of fuel pumps
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Follow my builds on youtube and IG.
www.youtube.com/thenameskam
@thenameskam on IG
If needed a fuel pump can be included!.
RK tunes
Hi, what about only the manifold ?
Thank you.
no. i will not be only selling the manifold.
RK tunes
sweet deal!
As I stated before, communicate well and often, especially when the news is not going to be pleasant.
Would you need to get forged internals?
nice.
97 BMW M3 (s52b32) - VF-Supercharger kit ( Vortech V2-SQ supercharger, 32 pound injectors, VF tuning ), VDO/LeatherZ Gauge Kit (Oil Temp, Oil Pressure, and Boost), UUC Motorwerks RSC36 Exhaust, Stainless Steel 6-2 Exhaust Headers, Bilstein Sports, Rear Adjustable Camber bushings, Wheel Spacers 10mm in front 25mm in back, Uprated Clutch, UUC Shift Knob, Short Shifter and Clutch Stop, Cross Brace, Mason Engineering front strut bar, Contour Wheels, Euro Ellipsoid (Angel Eyes) HID Headlights, braided steel brake lines, aluminum thermostat housing, mishimoto aluminum radiator and silicone hoses and a partridge in a pear tree
Bumps
“If liberty means anything at all, it means the right to tell people what they do not want to hear.”
― George Orwell
What about everything but the manifold (needs to fit a 24v e30)
Bookmarks