!!!!!!!!!!!!!!!!!!!!SOLD!!!!!!!!!!!!!!!!!!!!!!!!!! !
Selling my 1998 BMW M3 with LS3 swap and 6 Speed T56 transmission.
$19,900
Car is located in Irvine California.
Wife just gave me permission to pick up a Z06 Vette and while I love my car, I always wanted a Z06.
Fully story of the car and the build is in my signature, I am hiding nothing, you can see the full build from stock. I've had the car for about a year. It currently has 119K miles on the chassis and only 1K on a freshly built LS3. I had a LS1 in it first, but had a valvetrain failure so the motor was pulled and I built the new LS3. I have over 30K in the car as it sits right now. On the last dyno session it put down 455whp and 435wtq. It stupid fast, it destroys my buddies E92 M3 with a supercharger that puts down 490whp.
The entire suspension was replaced, every bushing and all balljoints.
Only issues with the car are driver door lock solenoid sometimes doesnt work. It opens and closes with a key just fine. I also lost the remote control, so it only has a manual key. The Alarm is installed and functional just need the fob.
Mod List
Engine:
LS3 shortblock
LS3 heads
LS3 ported Intake manifold
LS3 Injectors and rail
PTM 92MM Cable Throttle body
LS1 Wiring Harness
Custom 4inch intake
85mm Maf
222/230 EPS Camshaft
ACT clutch
lightened flywheel
2002 Camaro T56 Transmission with 40K miles on it.
Aeromotive stealth fuel pump in custom holder intank
MGW Shifter
NAHR swap kit which includes - NAHR stainless steel headers, custom CNC motor mounts, CNC Transmission mount, custom driveshaft, custom steering shaft. BMW (E36) 3-Series / New Age Hotrods Online Shop for more details
Custom exhaust with dual cats and Dinan catback.
Suspension:
AKG Subframe bushings
AKG Diff bushings
All new balljoints front and back
All new remaining bushings
Bilstein sport struts and shocks
Tein S-tech springs
New shock and strut mounts
New Swaybar endlinks and rubber mounts
New DBA drilled slotted front rotors
New stoptech pads
3.91 ring and pinion using the stock M3 LSD
BBS CH 18x10 Wheels
Nitto NT05 Tires 265/35/18 square setup
Misc:
Custom FXR retrofitted HID projectors with 55w morimoto ballasts.
BSW speakers, Alpine headunit with ipod adapter and bluetooth.
Car has working ABS, Airbags and Air conditioning. It has cats, but Smog is buyers responsibility.
Car is super fast, weighs about 3100lbs. Everything works on it. Interior is 9/10 exterior about 9/10 as well, has couple of dings in the paint, but overall very good.
[ame=http://www.youtube.com/watch?v=C2W4hCXV8lE]LS3 swap BMW M3 - YouTube[/ame]
[ame]http://www.youtube.com/watch?v=s1d58kMUazw[/ame]
Last edited by Kaane; 12-03-2012 at 02:18 PM.
wow I was just watching your dyno videos the other day... SICK CAR! GLWS!
Nice car, GLWS!
Tibor, That is a screamin deal for your car! Sad to see it for sale.
f*** id buy that in a flash if i had cash like that!!!!!!!
Talk about some serious power in a clean ride.
current E46///M3::H&R C/O::samco elbow::AFe dry panel::Mason FSB::straight sec.II::TMS kidneys::ZHP knob alc boot - 1975 BMW R60/6 - 1988 FJ62 Land Cruiser
past E30 325i (00=[][]=00) E36///M3 - E36 328i
sickness just needs euro tails
"Lamborghini, the tractor maker, wanted to figure out why his Ferrari's clutch kept crapping out (PITA, cost a lot of money). He complained to Ferrari, and Enzo didn't do anything. Lamborghini discovered it was the same, much cheaper clutch used in his tractors. The rest is history..."
That is nutz....awesome...I bet it gets some looks at the redlight
2014 Nissan GTR Black Edition
2009 Mercedes SL63 AMG
2007 Chevy Trailblazer SS
Fuuuuuuuuuuuuuuuuuuuuu......I need a change of pants.
ugghh that car is soo prettttyyyyyy......
Well fuck.
Bump for a sweet ride!
I did a LS1 swap on a FD RX7 in 2003... One of the saddest days of my life was letting that car go.
Bump for the cleanest Alpine White swap I've ever seen. Wow. I wish I had the money right now.
How is this not gone yet? Damn.
Oh my god I wish I wasn't worried about paying off college when im done with school...
Damn you build my dream car... WHO WANTS TO LOAN ME 10gs ? I can cover the rest..
Very clean and nice car ... free bump bump bump
wow...I would actually consider trading my STi for this!...I loved my LS in my big fat G8 GT, this thing must be nukin futz
B5 S4 Stage 3+ RS6 (Built Motor) 507whp/489wtq (Mustang Dyno)
IG: chef_oyer_d
http://losangeles.craigslist.org/wst...126323431.html
Interested in trades plus cash?
Just saw the car this afternoon on behalf of another member on the east coast.. whether he buys it or not is up to him but I must say the car is everything it is represented to be! One may even say he's underselling it in his description; it's a very clean no nonsense car and exactly as described. Kaane is a really nice guy who knows his stuff. This car was definitely gone through with a fine tooth comb, and it handles the power quite well. It is a BEAST of a car too- this thing flat out hauls ass. One of the fastest E36's out there no doubt..
Last edited by jvit27; 08-10-2012 at 08:32 PM.
'99 Estoril Blue + Dove Grey ///M3 coupe
'04 Jet Black + Cinnamon ///M3 coupe
The torque is beautiful. Good luck with the sale.
97 BMW M3 (s52b32) - VF-Supercharger kit ( Vortech V2-SQ supercharger, 32 pound injectors, VF tuning ), VDO/LeatherZ Gauge Kit (Oil Temp, Oil Pressure, and Boost), UUC Motorwerks RSC36 Exhaust, Stainless Steel 6-2 Exhaust Headers, Bilstein Sports, Rear Adjustable Camber bushings, Wheel Spacers 10mm in front 25mm in back, Uprated Clutch, UUC Shift Knob, Short Shifter and Clutch Stop, Cross Brace, Mason Engineering front strut bar, Contour Wheels, Euro Ellipsoid (Angel Eyes) HID Headlights, braided steel brake lines, aluminum thermostat housing, mishimoto aluminum radiator and silicone hoses and a partridge in a pear tree
Any emissions complications (being a bmw with GM motor)? Chassis all reinforced?
Lastly, did you get the vorshalg LS-x conversion kit?
Last edited by scooper; 08-11-2012 at 03:25 PM.
The post says what kit I used. New Age Hotrods.
For emission info PM me. Front subframe has been reinforced around the motor mounts. The rear is stock with new poly bushings.
Bookmarks