Update on 666 fab, not Jon but welcome Eric!!

[E30Alpina]

Ok so here is a update on the former 666 fabrication ( although Jon is apparently available for small things when he has time) Eric who was Jon's former buisness partner with 666 has moved into our shop and is getting his space all set up atm. Jon was nice enought to pass the "legacy" on to Eric in the form of all the jigs/templates for S14, M20, S50, M30, M42 etc along with all the mentioned heads (so custom off the car work is easier) Eric is a extremely talented fabricator and his wook is very much on par with Jon. PLease note this is not 666, Eric prefers not to carry the name with him but the work, quality and gorgeous product is still 100% here. We are located in Branford,CT and available for custom work and as well as "off the shelf" manifolds. I will post up some of his work soon but if you google image 666 alot of that work was Eric's

[bawareca]

I am really glad those products would be available again.I am really dying for one M20 TS as on the picture and this time around i may have it fit in my budget.
I am sure many people are curious about the pricing.

[E30Alpina]

We have alot of interest in the M20 TS, pricing will be in line with 666's

[wheelies247]

M52/s52 turbo and intake manifolds will be up for grabs also ? Is there any talk about down pipes being available to the Members ??

Thanks George

[E30Alpina]

Yes 24v turbo mani's are also available. We like to do DP's in house when car is here so fitment is spot on.

[HTOWN///M]

im liking that aluminum intake manifold!

[E30Alpina]

That's a m2O intake, there a few members running them on here. Really nice piece and cleans up a e30 bay a lot

[turbotime]

Gotta support fellow Connecticuters; work looks fantastic- you guys should do well!

[beefjurky6969]

Pretty cool to see my m20 being used to advertise the twin scroll mani. Looks a lot differant now though.

[JCarp90]

I want that turbo manifold and intake. Dear lord. WHERES MY CREDIT CARD??!!?!

**Edit: I didn't realize this was my first post. lulz.

[biglou911]

Ok so here is a update on the former 666 fabrication ( although Jon is apparently available for small things when he has time) Eric who was Jon's former buisness partner with 666 has moved into our shop and is getting his space all set up atm. Jon was nice enought to pass the "legacy" on to Eric in the form of all the jigs/templates for S14, M20, S50, M30, M42 etc along with all the mentioned heads (so custom off the car work is easier) Eric is a extremely talented fabricator and his wook is very much on par with Jon. PLease note this is not 666, Eric prefers not to carry the name with him but the work, quality and gorgeous product is still 100% here. We are located in Branford,CT and available for custom work and as well as "off the shelf" manifolds. I will post up some of his work soon but if you google image 666 alot of that work was Eric's

How much for the intake mani ??? I want !


Sent from my iPhone using Tapatalk

[Cyrix2k]

Is he going to be making the m20 turbo adapters again? (I'm not interested, but once ran a 666 adapter.)

[mazdero]

im in for an intake manifold!!!

[clevertd]

M30 intake manifold, yes please.

[E30Alpina]

Yes he is doing m20 adapters, need to check on prices. If there is enough interest in m30 short runner intakes then we will develop them too. We have a turbo b35 in house to do some testing on.

[biglou911]

I need s5x intake manifold


Sent from my iPhone using Tapatalk

[E30Alpina]

there is a bit of r&d and work to make a s50 intake mani, doesnt driven innovations or Mike radowski make these/ supply them. They look great and are proven. Yes it can be done and we "could" make them but it would take some r&d to get right and to the point that we want to market it.

[cragg56]

Do you have an E36 bottom or top mount divided manifold option? If only bottom mount is available does it mount high enough not to require a scavenge pump? Either way, if you offer a divided manifold, down pipe and wg down pipe option then shoot me a PM

[clevertd]

Yes he is doing m20 adapters, need to check on prices. If there is enough interest in m30 short runner intakes then we will develop them too. We have a turbo b35 in house to do some testing on.

Which chassis is it in? I'm not sure how much interest there would be here, mye28 might be a place to round some up.

[42000]

We have alot of interest in the M20 TS, pricing will be in line with 666's

group buy? haha

[bawareca]

group buy? haha

+1
That may be a great start for the new old business

[E30Alpina]

If I can get 10 people that commit to M20 TS manifold then yes we will do a group buy. I will get the whip out and tell Eric to start a weldin boy.

[42000]

I'll bring this up on e30tech... I'm sure there will be interest.

What would the wait time be and what is a rough price for a g/b...

a bunch of people are interested so this is a serious possibility! I wanted to PM you, but seem to be unable to do so.

[cragg56]

Free bump since I sent you a PM

[smokinbimmer]

I want the m20 intake mani. I absolutely hate the stock one. Makes me sick