96 328i - For Sale or Partout

[sboldis]

1996 Schwartz 328i

Selling or Parting out
Car has roughly 195k miles on it
Automatic transmission

PRICE DROP!!
Looking to get 2.3k for the whole car or best offer!

Not For sale
M3 Front Bumper
Fog lights
Parts Sold
M50 Manifold - SOLD
M3 Diffuser insert for 3 series rear bumper - SOLD
Rear Spoiler w/ 3rd brake light - SOLD

All prices do not include shipping most are OBO


Full Roller - Make Offer
Will sell if Engine and Transmission go, or make me an offer for the car

Engine
M52 - $600 you pull it
Unorthodox Underdrive pulley - $50
Stock Crank Pully - $25
Harmonic Balancer - $50
UUC Underdrive water pump pulley - $40
Stock Water pump pulley - $30
Painted Red Valve cover - $40
Painted Red fuel rail cover - $35
Stock intake - $50
S54 Oil filter housing w/ oil cooler - $175
Lower Temp Aux Fan Switch - $40
Lower Temp Thermostat - $30

Interior
Black leather Dash - $120
Front Door panels - $125 each
Back door panels - $125 each
Grey sun visors w/ clips and mirrors $30 each
Grey center map light trim, visor lights w/ bulbs - $40
Perfect Power Black Leather Sport seats, screens in the headrests - $250
Perfect rear black leather seats - $125
Black arm rest, small scratch - $50
Black A-Pillars Perfect condition - $50 shipped
Grey A-Pillars some wear- $30 shipped
Grey C-Pillars - $50 shipped
Carpet in good condition, will sell once interiors gone
Headliner, will sell once interiors gone
OBC 11 Button w/ some dead pixels - $40
Sunroof panel, grey
Sunroff motor cover, black, perfect condition no broken tabs - $30
Interior door handle covers all 4 - $25 shipped each.

Exterior - will sell once interior sold
Hood - $150
Trunk - $150
Stock 3 Series front bumper - $50
Stock 3 Series rear bumper - $75
Nose panel - $80
Driver side fender - $75
Passenger side fender - $75
M3 Side Moldings w/ all clips - $115 shipped
Stock Side moldings - $40
Euro Clear Corners - $50
Stock Headlights - $50
Stock Side Mirrors - $50 each
Clear Sidemarkers - $20 each
Smoked Tailights - $50 each $75 for both

Brakes
Drilled / Slotted Rotors - less then 2k miles - all 4 - $150
Red Calipers w/ new pads - all 4 - $150

Suspension: will be last to go
Rokkor Coilovers less then ~2k - $200
Control Arms less then ~2k - $100
Tie rods inner/outer ~2k - $75


The Bad:
Passenger side window came off the track and is currently rolled up but needs door panel to be removed and window to be re-aligned. Some body dents, and few small scratches, a noticeable dent/scratch on the rear passenger side, will provide pic shortly, paint crackle on rear spoiler not big.

Anyone is welcome to come see the car, i am trying to sell it whole but will slowly be selling off the interior parts then exterior parts then engine and finally shell.

Make offers, ask for parts, we'll see what we can work out.


Rear Spoiler - $80





M3 Side Moldings w/ all clips - $115 shipped



Drilled / Slotted Rotors - less then 2k miles - all 4 - $150
Red Calipers w/ new pads - all 4 - $150




Eibach Sport Rear Springs - $150



Stock 3 series - 15" Rims w/ tires - $180 OBO



Two stock Fan's w/ Fan Clutches - $30



Engine Bay - Sorry for fuzzy pic

[Ramtek55]

How much for spoiler shipped to 33707...?

And do you have armrest and rear deck...?

[sboldis]

Gonna give it a few days see if anyone wants it whole, if not spoilers yours

[Ramtek55]

Alright. Just pm me or whatever. And let me know bout that armrest too...

[1980corvette]

fdm kit? do you have spal fan?

[fuzionR]

Pm'd about rokkors. Very serious. Call or text me back

[sboldis]

fdm kit? do you have spal fan?

i do not have an spal fan, but i do have a low temp fan switch, as well as low temp thermostat...obd2 on the switch

Pm'd about rokkors. Very serious. Call or text me back

Trying a little longer to sell car whole, if not when i tear her apart rokkors are all yours, they've got plenty of life on them only used for maybe 5k miles so far if that

How much for spoiler shipped to 33707...?

And do you have armrest and rear deck...?

I do have both of those and will provide detailed interior pics

[ChadJr]

Edit: nevermind, got my head out of my arse and read the post

[Tractionworks]

Would you consider selling without motor and trans? If so i can pick up asap.

[96bmftw]

If you part the car out, I want the front bumper

[sboldis]

Would you consider selling without motor and trans? If so i can pick up asap.

If i sell the motor and tranny, i would def. do that, just need to get those gone, dont have a garage to hold onto an engine n tranny.

If you part the car out, I want the front bumper

The front bumper is a stock e36 bumper, the m3 one im keeping

[fhsu]

c-pillars with no broken tabs? how much shipped to 95123?

[sboldis]

Bump anyone interested in the motor, will do a good price on it...

[Ramtek55]

I do have both of those and will provide detailed interior pics

Pictures...?

[sboldis]

Pictures...?

will post pictures tonite!

[vag0]

let me know if you sell the motor n trans I need a shell I sold you the alternator

[Ramtek55]

will post pictures tonite!

...?

[sboldis]

Sorry for the slacking been engulfed in getting my m3 on the road...will post pics ASAP

bump for updated posts, prices, pics, and more interior pics to come

[sboldis]

Bump for price drop $1900!!!

[xXAlpineE36Xx]

Need cam position sensor, fuel pressure regulator, and catalytic converter if Ur parting out. Pm me on prices.

[sboldis]

Still for sale! and tons of parts available, still have some interest in it whole, willing to part out a bit to sell it cheaper

[FazdaGT]

Interested in Rokkors if you part with them. Drop me a PM if you want to sell

[hookenM]

Interested in hood. How far from the gwb r u? Condition of hood outta 10?

[sboldis]

Interested in hood. How far from the gwb r u? Condition of hood outta 10?

hood is 9 out of 10

and i'd do $150 picked up

[graymae]

how much for mid pipe/ cats shipped to 33603?