Blown what...?
I was going to buy the OEM alarm, i always hated the fact that the e36 had the alarm fob... Did some research and found this beauty.
Now it locks, rolls up and down the front windows and I dont have the extra fob hanging
How Cool is this!!!
Last edited by Matutino; 09-25-2010 at 12:01 AM.
Old set up: 520RWHP & 500RWTQ @ 20PSI 1/4 mile as of 7/26/15 12.5 @ 125MPH - 19PSI
New set up: Steedspeed Twinscroll, Wiseco Pistons 8.8:1 CR, K1 Rods, Blueprinted and Balanced, ARP Main Studs, o-ring block, GTR 12mm head studs, GT35R with 86mm HTA billet compressor wheel (GT3586RHTA) TwinScrol 1.06 exhaust housing, Nick G custom tuning, 6 Speed Transmission, UUC Twin Disc Clutch, UUC EVO III, UUC DSSR 109mm, EVO 6 Speed Driveshaft, HFS-6 W/M injection, Zeitronix data logger, 3" SS full exhaust, Rallyroad strut bar, X brace, Race coilovers.
Big gulps huh?
Say what!!! Where did you find that little guy?
95'///M3 Cosmos Black with AA intake, Gen III Exhaust, AA chip, BMP Front strut bar, Koni S/A's, H&R OE springs.Origin ID: RomCommm
Blown what...?
It's a beuty isn't it?Originally Posted by M3amazesme
Alarm including 2 cut keys for $200, can't beat that!
Even better, get off the car, lock it and windows roll up!!!!
I can put you in contact with the seller if you want...
I'm loving it
Old set up: 520RWHP & 500RWTQ @ 20PSI 1/4 mile as of 7/26/15 12.5 @ 125MPH - 19PSI
New set up: Steedspeed Twinscroll, Wiseco Pistons 8.8:1 CR, K1 Rods, Blueprinted and Balanced, ARP Main Studs, o-ring block, GTR 12mm head studs, GT35R with 86mm HTA billet compressor wheel (GT3586RHTA) TwinScrol 1.06 exhaust housing, Nick G custom tuning, 6 Speed Transmission, UUC Twin Disc Clutch, UUC EVO III, UUC DSSR 109mm, EVO 6 Speed Driveshaft, HFS-6 W/M injection, Zeitronix data logger, 3" SS full exhaust, Rallyroad strut bar, X brace, Race coilovers.
Resist
BMW CCA Member
I've been wanting this forever. how did you do this?
Blown what...?
Here you go guys!
http://cgi.ebay.com/ebaymotors/BMW-E...ht_4010wt_1033
Last edited by Matutino; 09-25-2010 at 12:29 AM.
Old set up: 520RWHP & 500RWTQ @ 20PSI 1/4 mile as of 7/26/15 12.5 @ 125MPH - 19PSI
New set up: Steedspeed Twinscroll, Wiseco Pistons 8.8:1 CR, K1 Rods, Blueprinted and Balanced, ARP Main Studs, o-ring block, GTR 12mm head studs, GT35R with 86mm HTA billet compressor wheel (GT3586RHTA) TwinScrol 1.06 exhaust housing, Nick G custom tuning, 6 Speed Transmission, UUC Twin Disc Clutch, UUC EVO III, UUC DSSR 109mm, EVO 6 Speed Driveshaft, HFS-6 W/M injection, Zeitronix data logger, 3" SS full exhaust, Rallyroad strut bar, X brace, Race coilovers.
Resist
BMW CCA Member
how much did the dealer charge you to cut it?
Anybody that clicks on that link just click sellers other items. Do not outbid me please? This guy is selling many of these units, no reason to run the prices up on each other.
Last edited by Volf; 09-25-2010 at 12:38 AM. Reason: Automerged Doublepost
///Mmmmm donuts
I wonder if they will work with the keyless entry already on my car.I dont mind not being able to roll my windows up
Diff Killer
Moderator
that's pretty damn cool! does anyone know if the keys are EWS enabled?
Hey man, I'm a professional!
Member
wow, I've been looking for something like this for a while. Any idea if you can retain the factory alarm but use this key?
Blown what...?
This guy will cut the key for you and make it eneable with your car, he requires one key from you to do so $165 for the alarm and 35 to cut both keys!!!!!!
you need to buy his alarm to use this key
I love it!
He said he would ge me a better deal if I get 10 guys
Last edited by Matutino; 09-25-2010 at 01:12 AM.
Old set up: 520RWHP & 500RWTQ @ 20PSI 1/4 mile as of 7/26/15 12.5 @ 125MPH - 19PSI
New set up: Steedspeed Twinscroll, Wiseco Pistons 8.8:1 CR, K1 Rods, Blueprinted and Balanced, ARP Main Studs, o-ring block, GTR 12mm head studs, GT35R with 86mm HTA billet compressor wheel (GT3586RHTA) TwinScrol 1.06 exhaust housing, Nick G custom tuning, 6 Speed Transmission, UUC Twin Disc Clutch, UUC EVO III, UUC DSSR 109mm, EVO 6 Speed Driveshaft, HFS-6 W/M injection, Zeitronix data logger, 3" SS full exhaust, Rallyroad strut bar, X brace, Race coilovers.
Big gulps huh?
Thanks for the info. I dont think finding 10 guys would be too hard. I wish I would have found this before I bought my key fab at the dealership.
95'///M3 Cosmos Black with AA intake, Gen III Exhaust, AA chip, BMP Front strut bar, Koni S/A's, H&R OE springs.Origin ID: RomCommm
Member
soo cool
Performance BMW car
Sponsored by :
www.euro-spec.net
www.bimmian.com
BMW Motorwerks
support:
www.vmwerks.com
www.esstuning.com
www.my330i.com
Boosted Member
i like it
Garrett
Member
Blown what...?
Nothing like OEM look for me!
Old set up: 520RWHP & 500RWTQ @ 20PSI 1/4 mile as of 7/26/15 12.5 @ 125MPH - 19PSI
New set up: Steedspeed Twinscroll, Wiseco Pistons 8.8:1 CR, K1 Rods, Blueprinted and Balanced, ARP Main Studs, o-ring block, GTR 12mm head studs, GT35R with 86mm HTA billet compressor wheel (GT3586RHTA) TwinScrol 1.06 exhaust housing, Nick G custom tuning, 6 Speed Transmission, UUC Twin Disc Clutch, UUC EVO III, UUC DSSR 109mm, EVO 6 Speed Driveshaft, HFS-6 W/M injection, Zeitronix data logger, 3" SS full exhaust, Rallyroad strut bar, X brace, Race coilovers.
Member
Member
Will this product close the moon roof also?
Is it a plug and play product?
m
Member
Ive heard from my friend that reliability on these aftermarket keys generally isn't all that great.... Owners of this: how is your range and reliability?
My way of life!
nice.... but i cant give up my viper two way pager.
Member
Cool indeed... I know dad will be interested....
Sidney J in OK
1986 India Red Porsche 944, Autocross Whore, Weekend fun car
1987 Porsche 924s, Color undecided Fprep car in progress
1997 Estorilblau E36 M3 Sedan- Gone, but not forgotten.
Resist
BMW CCA Member
After going through 3 $80 viper remotes that have horrible range I'm glad to give mine up.
I Brake for Apex
awesome find, i've been wondering if this was a possibility at an affordable price. +1
Living Life Turn After Turn!
Member
BMW CCA Member
Interested
Member
interested as well!
My way of life!
really? that sucks. I had mine installed right after i bought the car, which was about 3 years ago and i still have the same remote. had the one on my eclipse for about 6 years and it was still working when i sold it awhile back.
Posting Permissions
Reply With Quote
Bookmarks