Page 1 of 2 12 LastLast
Results 1 to 25 of 49

Thread: 97 328i full part out.

  1. #1
    Join Date
    Feb 2007
    Location
    Mount Joy PA
    Posts
    1,557
    My Cars
    98 M3/4/5, 02 325iT

    97 328i full part out.

    I am parting my car. It is a 97 328i sedan. 212k miles Alpine white over black leather.
    I believe the car has a blown head gasket. Also some rust issues.
    The car still runs and drives. It threw a CEL and has a lot of antifreeze gummed up around the oil fill cap.
    I have service records for everything.

    Well over the weekend I was moving the car around and the CEL is now gone. Maybe the motor isn't as bad as I thought.


    I am interested in trading parts/ cash for a set of OEM bosch or ZKW projector headlights.
    Also interested in Bilstein sports and H&R sport/ race springs for my 98 M3 sedan

    5sp manual

    m52 w/ installed Bav Auto power programmer

    JB racing ltw flywheel $400

    sachs sport clutch $200

    18x8.5 et 40 hyperblack CSL wheels. EAS reps. 3 wheels are perfect, no flaws, 1 wheel has slight rash. hardly noticeable. Pics are in the link at the bottom. General UHP tires. fronts have some tread, rears are almost gone. I have the original receipt. they were new 9/08 $650

    non sport front seats in good shape 8/10
    heated and powered.
    one small hole in the passenger seat bottom.
    $100 for both.

    Dove grey M3 lux front seats, heated and powered. drivers side back tilt gear is broken. motor works though. some wear and a few small cracks. $200 for both. Overall 7/10

    Dove grey rear seat (back and bot) excellent shape extremely soft leather. $100

    stock headlights $20

    stock side markers $10 SOLD

    Stock taillights $20

    Depo full smoked tailights (no bulb holders) $30

    Depo smoked taillights $50

    Glove box. No sag $50 sold

    window regulators. $50 each

    Window motors. $50 each

    doors $75 obo depending on what you want included.

    Hood sold

    Nose panel sold

    Radiator support sold

    lux side skirts $50 sold

    rear bumper Non M $40

    cracked DDM m3 rep front bumper (does not come with slats or mesh) $30

    Full trunk carpet and rubbers. $45

    AA gen III catback exhaust. very good shape, no bends and still very shiny. $400 sold

    front bumper carrier $20

    M3 front bumper brake ducts. $15 for both sold

    ddm M3 rep side moldings w/ Motorsport international badges $60 sold

    dove grey rear speaker covers $5

    dove grey rear defrost grill $2

    Grey M3 floor mats set of 4 perfect condition. $40

    battery cover and lug wrench $10

    stock side moldings painted alpine white. $10

    clear side markers. 97 and up $15

    stock chrome grills $15

    aux. fan motor $10

    UUC Brand new in bag blue rubber coated stainless steel brake lines. sold

    tierod boot new in bag. $5

    Aux fan sold

    misc bump stops and plastic covers $5 a piece

    Front fender liners $15 for both

    Rear fender liners $10 for both

    window switches $10 a piece.

    H&R OE Sport springs (blue) rears never mounted, front used for about six months. $100

    Front bumper shocks $10

    rear bumper shocks $10

    Rubber surround for shifter sound deadening $5

    All door/hood/trunk seals . no rips car never leaked. $80 for all

    Black carpet. Really good shape. $100

    Black dash. no cracking $50

    18 button OBC clock does not illuminate. $35

    faded black rear deck (could be redyed) $10

    Door sills. All four $20 Drivers door has some kinks in the metal strips.

    4 spoke steering wheel. Some wear, no rips in leather, stitches look good, Colored emblem, airbag and slipring. $100

    ZF steering rack Used for 1 month. Have receipt. $500

    Crossdrilled front rotors. barely worn. $100 sold

    Brembro OEM rear rotors good shape $25 sold

    Calipers with hawk HPS pads $200 for all 4 pads are sold

    Stock anti roll bars $50

    Stock springs $20

    sunglasses cubby $10


    All prices are obo and do not include shipping.

    Obviously I would like to sell the big heavy stuff locally, but I will ship at the buyers expense.

    Pics: http://s298.photobucket.com/albums/mm260/Ramm328/

    Added a bunch more stuff.

    If you want more pics of something just PM me your email and what you want pics of. thanks
    Last edited by Ramm328; 04-24-2010 at 11:09 PM. Reason: updated

    328 part out http://forums.bimmerforums.com/forum....php?t=1433861
    BMW CCA# 386330 Nittany Bimmers Chapter

  2. #2
    Join Date
    Jul 2005
    Location
    Ephrata, Pa
    Posts
    1,666
    My Cars
    '91 M5, '00 740i msport
    Trade for an 87 535is? Pm me if you might be interested in trying to work something out.

    Jason

    1986 325es (parted) l 1987 325e (parted) l 1986 325es (sold) l 1993 325i (sold) l 1997 M3 sedan (parted)
    1988 535is (sold) l 1986 325e (sold) l 1991 s52 powered 525i 406K! (sold) l 1992 525iT/5 (sold) l 1995 M3 (sold)
    1995 525i (sold) l 1995 525iT (sold)
    2000 740i msport (current) l 1991 M5 (current)

  3. #3
    Join Date
    Sep 2008
    Location
    Forest Hill, MD/ KOP, PA
    Posts
    3,211
    My Cars
    95 1jz m3
    pics of taillights?

  4. #4
    Join Date
    Jul 2005
    Location
    Centreville
    Posts
    1,224
    My Cars
    '89 E30, '05 SE-R Sp
    how much for all the window switches (front and rear doors) and harnesses to each? 20171
    You can't inja' this ninja!

    <--- LMK if you need some work done on your car, I also roll fenders .

    My Parts For Sale Click HERE

  5. #5
    Join Date
    Feb 2009
    Location
    Springfield, Virginia
    Posts
    537
    My Cars
    '95 325is
    Interested in the side-skirts, as well as the lux grille insert (i assume its the car in your sig?)

    pm'd as well
    Current: 1997 328i Hellrot/Black, 65,xxx miles | 1999 2.8 z3 coupe (1of1) Cosmos/Extended Tanin Red, 145,xxx miles, Kosei K1's
    Sold: 1995 325is Arctic Grey/Dove | 1995 M3 Boston Green/Champagne | 2001 325xiT Sienna Red/Tan
    Wheels: 17x8.5 Kosie K1's | 16x7.5 Borbet Type A's | 15x7 Style 32's

  6. #6
    Join Date
    Sep 2005
    Location
    Northern Virginia
    Posts
    210
    My Cars
    98 328i - Hellrot
    pmed regarding a few things.

    keep us posted.

    Thanks!

    5ampl3 aka Eric - Member #1: Long Weenis Crew

  7. #7
    Join Date
    Aug 2009
    Location
    MD
    Posts
    828
    My Cars
    07 Mazda 3s 5dr
    Is it lowered? Whats the setup and is it for sale if so?

  8. #8
    Join Date
    Jul 2005
    Location
    Hagerstown/Baltimore, Mar
    Posts
    897
    My Cars
    e36 M3 e30m50
    get you get any pics yet, i might need some parts.

  9. #9
    Join Date
    Feb 2007
    Location
    Mount Joy PA
    Posts
    1,557
    My Cars
    98 M3/4/5, 02 325iT
    updated, I hope to have pics up by the end of the weekend. Sorry, I have been really busy

    Quote Originally Posted by EvilTwin View Post
    how much for all the window switches (front and rear doors) and harnesses to each? 20171

    Do you want the ones off of the rear doors as well. (6 total) and how long of a pigtail do you want?
    Last edited by Ramm328; 04-10-2010 at 10:51 PM. Reason: Automerged Doublepost

    328 part out http://forums.bimmerforums.com/forum....php?t=1433861
    BMW CCA# 386330 Nittany Bimmers Chapter

  10. #10
    Join Date
    Aug 2008
    Location
    Ellicott City, MD
    Posts
    3,155
    My Cars
    2005 STi
    how much for the trans?
    E92 M3-1 by Arlen Liverman, on Flickr

  11. #11
    Join Date
    Feb 2007
    Location
    Mount Joy PA
    Posts
    1,557
    My Cars
    98 M3/4/5, 02 325iT
    $100 if you help me pull it.

    328 part out http://forums.bimmerforums.com/forum....php?t=1433861
    BMW CCA# 386330 Nittany Bimmers Chapter

  12. #12
    Join Date
    Aug 2008
    Location
    Ellicott City, MD
    Posts
    3,155
    My Cars
    2005 STi
    Quote Originally Posted by Ramm328 View Post
    $100 if you help me pull it.
    hmm may have to take that. I'll pm you in a sec
    E92 M3-1 by Arlen Liverman, on Flickr

  13. #13
    Join Date
    Feb 2007
    Location
    Mount Joy PA
    Posts
    1,557
    My Cars
    98 M3/4/5, 02 325iT
    Quote Originally Posted by meseetree View Post
    get you get any pics yet, i might need some parts.
    Pics are up guys. more are coming too.

    328 part out http://forums.bimmerforums.com/forum....php?t=1433861
    BMW CCA# 386330 Nittany Bimmers Chapter

  14. #14
    Join Date
    Feb 2007
    Location
    Mount Joy PA
    Posts
    1,557
    My Cars
    98 M3/4/5, 02 325iT
    To the top.

    328 part out http://forums.bimmerforums.com/forum....php?t=1433861
    BMW CCA# 386330 Nittany Bimmers Chapter

  15. #15
    Join Date
    Jul 2007
    Location
    poconos pa
    Posts
    1,165
    My Cars
    e36 m3, turbo e36
    Sent you pm

  16. #16
    Join Date
    Oct 2006
    Location
    Manassas
    Posts
    1,165
    My Cars
    1995 325i
    Would it be possible/ piratical to swap your 328 DME in my 325?
    and do you still have the M3 side moldings?
    Last edited by M3pwrofm3; 04-13-2010 at 04:01 PM.

    Selling my E500 Olympus $350(OBO), let me know if you're interested!

  17. #17
    Join Date
    Feb 2007
    Location
    Mount Joy PA
    Posts
    1,557
    My Cars
    98 M3/4/5, 02 325iT
    Quote Originally Posted by M3pwrofm3 View Post
    Would it be possible/ piratical to swap your 328 DME in my 325?
    and do you still have the M3 side moldings?
    I have no idea about the DME. I Pmed you.

    Quote Originally Posted by M3pwrofm3 View Post
    Would it be possible/ piratical to swap your 328 DME in my 325?
    and do you still have the M3 side moldings?
    I have no idea about the DME. I Pmed you.
    Last edited by Ramm328; 04-13-2010 at 05:41 PM. Reason: Automerged Doublepost

    328 part out http://forums.bimmerforums.com/forum....php?t=1433861
    BMW CCA# 386330 Nittany Bimmers Chapter

  18. #18
    Join Date
    Mar 2009
    Location
    harrisburg,pa
    Posts
    1,032
    My Cars
    1992 k1500,1997 e36
    Need the brake ducts. Pm me please and i can meet you.
    M3 Catback~3.91 lsd~Billies/h&r~15mm Spacers~Airbox mods

  19. #19
    Join Date
    Apr 2009
    Location
    Northern VA
    Posts
    1,852
    My Cars
    97 //M3/4/5 & 99 //M3/C
    Quote Originally Posted by Ramm328 View Post
    I have no idea about the DME. I Pmed you.



    I have no idea about the DME. I Pmed you.
    I seriously doubt the DME's are compatible since 325's are OBD I.

    I PM'ed you about a bunch of parts.

  20. #20
    Join Date
    Dec 2002
    Location
    Silver Spring, MD
    Posts
    10,078
    My Cars
    #199 IP BMWCCA
    Why do you think it is a HG issue? I may be interested in the motor if the head isnt cracked.
    Eric WONGer
    2012 NASA Nationals GTS3 First Loser
    EX-#121 IP/GTS3 M3 SOLD
    Now-#121 GTS3 E46 M3

  21. #21
    Join Date
    Nov 2006
    Location
    Anywhereland
    Posts
    353
    My Cars
    04 GTI 1.8T, 97 M3/4
    How much for the hood? What kind of shape is it in?

  22. #22
    Join Date
    Oct 2009
    Location
    Northern Virginia
    Posts
    923
    My Cars
    e36
    Trade you those Motorsport intl tags on the moldings for my M3 ones plus I'll send you $15?

  23. #23
    Join Date
    Feb 2007
    Location
    Mount Joy PA
    Posts
    1,557
    My Cars
    98 M3/4/5, 02 325iT
    Quote Originally Posted by magnetic1 View Post
    Why do you think it is a HG issue? I may be interested in the motor if the head isnt cracked.
    Pmed

    Quote Originally Posted by Uofacarnutt View Post
    How much for the hood? What kind of shape is it in?
    It is in really good shape, good paint, straight and true.
    hood is pending sale this weekend, if it falls through you are first on the list.

    Quote Originally Posted by globalsunset View Post
    Trade you those Motorsport intl tags on the moldings for my M3 ones plus I'll send you $15?
    Moldings are pending sale, if it falls through I will think about it.
    Last edited by Ramm328; 04-14-2010 at 06:56 PM. Reason: Automerged Doublepost

    328 part out http://forums.bimmerforums.com/forum....php?t=1433861
    BMW CCA# 386330 Nittany Bimmers Chapter

  24. #24
    Join Date
    Sep 2008
    Location
    Forest Hill, MD/ KOP, PA
    Posts
    3,211
    My Cars
    95 1jz m3
    is the underpanel still in good shape?

  25. #25
    Join Date
    Feb 2007
    Location
    Mount Joy PA
    Posts
    1,557
    My Cars
    98 M3/4/5, 02 325iT
    I am keeping the motionmotorsports underpanel for my M3.

    BTW, what kind of numbers do you gain with your sunbelt cams?

    328 part out http://forums.bimmerforums.com/forum....php?t=1433861
    BMW CCA# 386330 Nittany Bimmers Chapter

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •