DYNO DAY...sign up if interested...

[m32911s]

Well since I was unable to put together or even make the last dyno day, I want to see who is interested in still getting their car dynoed. I was thinking either Thursday, May 7 or Saturday, May 16 in the morning. Once I get at least 4-5 people I will set up a session with Carb Conn.

1. m32911s
2. Huy
3. ericsmc83
4. BKHuff
5. lpphreakx06
6. Septro
7. hun77777
8. Cougfan335
9. MatteBlackCoupeDude
10. RavsM3
11. Jeffxxx
12. Mookster


***UPDATE: Dyno day will be Saturday May 16 starting at 10am. Everything has been confirmed with CarbConn"

[jnyjetta]

What are you looking at for pricing?

Also, I'm looking to rent a portable 4 wheel dyno for a day-long event if you know anyone that has one...

[todor]

i'll be down to test out my E21
pending date and price of course. It's usually $85, right?

[///w3fl3x]

Hey Jay put me down on the list. I should have money again if it's not too close to my return trip from bfest.

[M3Scharged]

Europe funds needed but I'm in for checking out others #'s

[m32911s]

I called Carb Conn and it will be $75 per car with at least 5 people needing to sign up. Looks like we have three so far...

[ericsmc83]

I can make the Saturday date. I'd like to see my delta with the new tune.

If we can agree on that Saturday, I may be able to get some people from the other forum. There are a few there with new mods.

[///w3fl3x]

I can make the Saturday date. I'd like to see my delta with the new tune.

If we can agree on that Saturday, I may be able to get some people from the other forum. There are a few there with new mods.

Get them to sign up. I'm down for saturday the 16th.

[BugsB]

I'm down, however I do have a question. I have never been on a dyno before so could somebody give me the low down of how the situation plays out?

[///w3fl3x]

I'm down, however I do have a question. I have never been on a dyno before so could somebody give me the low down of how the situation plays out?

Tie down car, they plug stuff up for readings, you start to drive your car and not go anywhere, mash on gas once in third or was it fourth, get off gas once you get to redline, let off gas and don't touch brake pedal, repeat as instructed and bam you get a printout in your hands.

[ericsmc83]

I'm down, however I do have a question. I have never been on a dyno before so could somebody give me the low down of how the situation plays out?

The only rule is don't hit the brakes!

But just as w3fl3x said, it's just a drive up on the roller, you accelerate easily thru the first 3 gears, then let her have it in 4th to redline.

[farzad97m3]

I am down if you guys are willing to do it sometimes this week.

[todor]

I'm game for Sat, May 16th.

[sd4ever05]

If my Sc is on the car i might roll out for dyno day

[JohnnyWash1]

Could I bring my Civic? If so, I could do Saturday.

[mitchelrl]

Brit,

You'll get situated on the rollers and tied down etc.

Go esily through through all the gears into 4th (shift between 2500-3000 rpms)

Then hold it steady in 4th, John will tell you when to go.

Step on the gas and bring it to redline

once you get pretty damn close to redline 6400 for stock tune/6900 for aftermarket tune (you'll be past the point of making power), put in the clutch, let off your gas, put your car in neutral and let it coast to a stop. DO NOT BRAKE

[Flood]

I'm in if I can get my motor back in one piece by then.

[BugsB]

Just out of curiosity what happens if somebody hit the brakes?

[taylorwilsdon]

Just out of curiosity what happens if somebody hit the brakes?

You accidentally the whole dyno.

[JohnnyWash1]

Brit,

You'll get situated on the rollers and tied down etc.

Go esily through through all the gears into 4th (shift between 2500-3000 rpms)

Then hold it steady in 4th, John will tell you when to go.

Step on the gas and bring it to redline

once you get pretty damn close to redline 6400 for stock tune/6900 for aftermarket tune (you'll be past the point of making power), put in the clutch, let off your gas, put your car in neutral and let it coast to a stop. DO NOT BRAKE

Wow, you are still around Mitchel? And you are helping people? Weird days we live in.

[m32911s]

Please see update in first post...

[ericsmc83]

Members from the other forum joining:

6. lpphreakx06
7. Septro

[m32911s]

Date and time confirmed. See first post.

[M3Scharged]

Any speculation on who's gonna have the highest #'s?

[m32911s]

Any speculation on who's gonna have the highest #'s?

Out of the people that have signed up, I would say one of the chipped 335's or the civic (I assume built motor with FI).