CA 92883 92 White 325i Sell/Part Out N/V

[drtweak1992325i]

Newer Post

http://forums.bimmerforums.com/forum....php?t=1441580





CAR HAS BEEN MOVED TO BEING COMPLETLY PARTED OUT!!! READ 3RD POST!



Price drop!


SOLD PARTS

Cluster - SOLD
Driver Air Bag - SOLD
Driver Door Handle - SOLD
Hood Latches - SOLD
Midrange Speakers- SOLD
Plastic Liner between door seal and carpet (front only) - SOLD
Center Vent - SOLD
Radiator - SOLD
Climate Control Analog - SOLD
All Door Handle Exterior Trim - SOLD
ALL windows switches - SOLD
Window Regulators - SOLD
Intake Boot - SOLD
Rear Hubs W/Bearing - SOLD
O2 Sensor - SOLD
OBC - SOLD
MAF - SOLD
Wireing Harness - SOLD
6 Coils - SOLD
Glove Compartment - SOLD
Interior Door molds - SOLD
Wiper resivior - SOLD
Wiper Pump - SOLD
Oil Filter Housing - SOLD
All 4 Door gaskets - SOLD
Idle Pulley - SOLD
AC Compressor - SOLD
Fog Lights - SOLD

*Prices with out shipping*

for TBA PM me and i'll give you a price. These are items where I have to check condition.

Passenger side fender - 30
1 peice headlight set *yes i know they suck. but you never know* - 30
All four rims with tires - 200 LOWED PRICE - two tires have .5cm of tread left. Still lot of life. other two are balding on the edges but have tread in the middle
Two bottle cap rimes - 25 each
M50 Block - Still have really good cross hatching for 270k
M50 NV head (Has only 15k on it from last rebuilt) - 250 - Thats Shipped -- Currently Rebuilding
Power Braking Module
Steering hoses - Part Numer
32411138419 - $10
32411141714 - $30
32411141953- $40
AC condencer -
64531385165- $70
Auto Drive shaft
92 Auto Tranny - 270k
Altanator -
AL0739X - $40
Valve Cover
M50 Oil Pan - $65
Cams - $100
1 sets of springs
Timing Chain - upper - $10 Lower - $25
Crank
idle Pulley - Sold
Power steering pump $70
M50 Exaust mani - $50
M50 Intake - $90
M3 Muffler -Sold
Throttle Body - $25
Fuse Box
- No Lid
Cam Towers
Piston rods
402 ECU - Sold
Tranny ECU - Sold
1 Set of OEM Coils - Do work, Millage currently unknown.
Fuel Lever/Sender
Power Breaking Pump
Engine Mounts - 25 shipped



Transmission - 4 speed GM 270k - TBA


If there is anything else here that is not listed just ask! EVERYTHING is to go! - NOTE - I'm looking to BUY your spare tires and rims! If you want we can work out a deal! i have two tires with plenty of trim! Need 3 of there so there are wheel to roll out the frame when i am done!






Parts NOT for sale:

Rear View Mirror.

Hey i have to keep some part of her! Might as well be something useful lol.



Pics of Wreck http://thetweakingzone.com/files/pics/BMW/BMW%20Wreck/
Pics of Head Job (256K) http://thetweakingzone.com/files/pics/BMW/headjob/
Current Pics http://thetweakingzone.com/files/pics/BMW/pics/

[drtweak1992325i]

bump

[drtweak1992325i]

Alright due to need of money Car being moved to part out only.

PM me for prices Part out starts tomorrow on monday.

A few things about parts and shipping. I ship my parts though UPS except for small parts that will be shipped though USPS. NOTE: I WORK for UPS. I know how things are handled, and how to properly and securly package a package. All Prices I give on parts are Shipped and with shipping insurance.

A few things that are for PICK UP ONLY.

Tires + Rims, FULL engine with or with out tranny, Tranny, Drive Shaft, And any body parts like Door, Glass, Fenders.

I'd Perfer to sell entire engine to less my amount of work but If not i will tear down and part out.

Whole car for sale so not going to post list of items because that would be a lot of items lol. I'll post what I have sold. PM me for price and pics. Pics will be taken once an item is requested.

[mrdezyne]

manual or auto? Need an ECU...

[drtweak1992325i]

4 speed Getrag auto

Also its the 402 ECU for those who dont know what the NV number is

[ChrisM011]

I am actually looking for some of the brake ducts and underbody panels for under the front of the car (passenger side). I live relatively close (in LA) and would not mind dropping in during the coming weekend to pick the parts up, if you have them. Please drop me an email at BoardwalkVW@hotmail.com for further info exchange.

Chris

[drtweak1992325i]

Sorry man the break ducts and the plastic parts under neither (Like triangle peice witht he one long end that connects the bumper to the plastic fender linding) has either falled off because it was old and brittle or broke in my car accident. The plastic fender lining on the passenger side though is good.

[drtweak1992325i]

New Pics.

http://www.thetweakingzone.com/files/pics/BMW/pics/

Some interior parts. ALL switches are a year and a half old and work perfectly. Climate Control works great, Center Console needs cleaning but when clean looks good.

NOTE: Do have two holes from my custom IPOD modification.

Glove Box does sag a little but in good condition. BMW flash light no good.

Side panels good besides bubbling on some.

PM for prices

[coolx7]

did u have to take the front end off for the head job or was it all off already ?

[drtweak1992325i]

I took it off

[m2pc]

Hey man, sorry to see her go!
Someone buy this guy's stuff -- I know him personally and he's helped me out several times.

Free bump!

[drtweak1992325i]

Yea very sad to see her go...I cry everything i look at her or when i see another E36...Yea the TL will smoke my car...but damn its just not the same!!! I hate front wheel drive cars! You cant have fun in them!!! GAH! lol

[gsolo]

How much for the passenger side front fender? Will pick-up

[drtweak1992325i]

if you come and pic up 50 bucks man. passenger is still in great shape. No damage to passenger side during the accident. Note: the Alpine White is more like a 17 year old Fades Apline White lol. but that can always be fixed with a nice paint job.

[drtweak1992325i]

BUMP!

Still LOTS OF PARTS!

Going to update pics again soon.

New parts that I have gotten out

ALL INTERIOR parts have pretty much been stripped out. Anything for the interior being sold i can have pics up and a price as soon as i get a message.

as for Exterior and engine parts. Dad is currently doing a clutch job on the truck. not sure when he will be done. Curently using all the good tools and jacks and stands and what not. So engine wise i cant get much. Not now that is. Maybe in a few days.

[drtweak1992325i]

Bump! Hardly anything sold!

M3 Exaust!

set of Michlin pilotes! 2 of them has considerable wear the other two are almost brand new! still lots of tread!

Fod lights are only a year old! With Brackets!

Engine needs work but even in the condition it is in it still pulled hard! great for someone doing a first time engine swap into a 318 or engine replacement! Engine will come with everything! Even cam tool and flywheel locking tool!

Cats are old but are good to be recycled!

[hoveringuy]

Exhaust? What condition? Will you ship it?

[whosyadadie01]

driver seat still availible ?

wish you would ship the rims as i need two of them (dont evenm want the tires lol)

[drtweak1992325i]

M3 exaust. Good condition. If interstred and will to pay for the shipment i'll ship. For the exaust will be 75+ shipping. I'll take pics for you. And if you wish i'll ship the M3 Exaust Hangers (will be 2 years old in aug) for an extra 20.

Driver seat is all ripped up on the bottom. thats why i have a seat cover over it.

As for the rims. They are 15 inch 15 spoke rims. If you willing to pay for the shipping I'll ship. 100 plus shipping for 2 of them rims. If you want some good tires on them too i'll take 200 plus shipping. If you want the tires with it i'll take a pic of how much tread is on them still.

I also have two bottle cap rims just sitting as well if anyone wants them 20 each

[drtweak1992325i]

Bump

[drtweak1992325i]

bump bump! lots of parts still!

[drtweak1992325i]

bump

[drtweak1992325i]

bump

[drtweak1992325i]

bump. Slowly but surely shes going.

[Smilez]

im semi local (moreno valley) i have to replace my rear passanger side bearing. we can swap?