FS: R-comps, Slicks, AEM, Autronic, S54 parts, S50/52 parts

[B.Watts]

All parts are currently at RRT near DC in Dulles, VA. We can easily
ship or, even better, deliver to O'fest this coming weekend. For more
information on the S50/S52 motor and parts, let me know and I'll track
down details from the guys at RRT. Priced as listed, OBO.

Some of these parts have been listed before. If I somehow missed a note or two from folks who were interested, I apologize. I was tied up for a bit with work and the birth of my son. Ready to deal now.

-------------------------------------------------------------------

TIRES (also listed here by RRT: http://forums.bimmerforums.com/forum/showthread.php?t=1084359):

SOLD - 4 Pirelli D5 compound Slicks 245 645 R18 only 4 short sessions on them
$330 new each, selling for $125 each plus shipping (or local pick-up
in NoVa)

SOLD - 4 Hoosier R6 P245/35 R18 1 heat cycle and 6-lap practice session $250
new each, $175 each plus shipping (or local pick-up in NoVa)

Hoosier A6 P245/35 ZR18 -- Two@ $140 each -Scrubbing-7 laps/Qual-6
laps/Race-7 laps
Hoosier A6 P285/30 ZR18 -- Two @ $150 each- Scrubbing-7 laps/Qual-6
laps/Race-7 laps

Hoosier P245/35 ZR18 WET -- Two @ $200 each Scrubbing-7 laps/Qual-6
laps/Race-7 laps
Hoosier P275/35 ZR18 WET -- Two @ $200 each Scrubbing-7 laps/Qual-6
laps/Race-7 laps

NEW Hoosier A6 P245/35 ZR18 -- Two @ $282 each
NEW Hoosier R6 P245/35 ZR18 -- Two @ $282 each

------------------------------------------------------------

ENGINE MANAGEMENT:

AEM: $3000

This is the Evosport Advanced Hardwire Kit ($3600 new) currently setup
and tuned to run a S54:
http://forums.bimmerforums.com/forum...&highlight=aem

Wiring Harness for S54: Negotiable with sale of AEM or sold seperately
with offers. Contact if interested.

AUTRONIC SM4, new, never used, in box: $2200

------------------------------------------------------------

S54 PARTS:

S54 Sunbelt Manual Throttle Conversion Kit/Cable, used 1 season - $400

S54 Vanos Delete Cam Gear Kit - $300

Stock Intake Manifold - Make offer?

Stock S54 DME: Make offer

-------------------------------------------------------------------------------------------------

S50/52 PARTS:

SOLD - 30 lbs Fuel Injectors - $200

SOLD - S50 Intake Plenum - $100

SOLD - DME w/ Custom Chip for the "mods" listed here - $300

3.2L Block - $200

Schrick Cams (276/264, need to confirm sizes) Part numbers: Intake cam: 281 E5 807, Exhaust cam: 261 A5 800 - $1000

Race Pistons - $700

SOLD - 3.2L Crank - $350

Race Built Cylinder Head

Contact for more information.

[B.Watts]

The items listed below are SOLD.

4 Pirelli D5 compound Slicks 245 645 R18 only 4 short sessions on them
$330 new each, selling for $125 each plus shipping (or local pick-up
in NoVa)

4 Hoosier R6 P245/35 R18 1 heat cycle and 6-lap practice session $250
new each, $175 each plus shipping (or local pick-up in NoVa)

30 lbs Fuel Injectors - $200

S50 Intake Plenum - $100

DME w/ Custom Chip for the "mods" listed here - $300

[B.Watts]

We also have a S54 DME available. Make an offer until I can figure out how much it is worth.

[B.Watts]

Updated Sold items from the O'fest weekend.

[ScotcH]

so .... how about that head, Bryan?

[Mcoupe Mus]

Hi
Just wondering would the cams fit on a euro spec s50b32 motor? also brand new or used?

Thanks

[B.Watts]

so .... how about that head, Bryan?

Working on it...turns out it may not be in the shape I thought it was. I'll let you know ASAP.

[B.Watts]

Hi
Just wondering would the cams fit on a euro spec s50b32 motor? also brand new or used?

No these cams are for a US S50/52 and should also fit a M50/52 from what I understand.

[B.Watts]

Possibility of delivering parts to the Grand-Am race at VIR this weekend.

[zemaestro]

phone number please

[bbaz]

phone number please

+1

I've sent two PM's over about 4 days - No replies to either of them

[Tronix]

Call RRT at 703-661-4222

[clintjg]

Will someone be around at the RRT open house this weekend to discuss?

[Tronix]

Yes! Barry and James will both be there.

[B.Watts]

As mentioned, all of these parts will be available at the RRT open house this weekend. Thanks for the post Bruce...I thought I was subscribed to this thread, but it seems I wasn't.

[911Lurker]

As mentioned, all of these parts will be available at the RRT open house this weekend. Thanks for the post Bruce...I thought I was subscribed to this thread, but it seems I wasn't.

Brian,

I have a Dunlop tire sizing question:

do you know what are the rolling diameters of the 280/650 tires? I calculate 25.6, but I was told they were actually 25.4. I searched through the web, but couldn't find any Dunlop road racing tire info.

The real reason I'm intersted is that the new Dunlops are 280/660, and I'm not sure that the rake and ABS will like the new sizing.

I haven't figured out how to send a private message on this forum...

Thanks,

-td

[theruss1an1]

Just tossing this out there... What is the condition of the block and anybody have an idea of shipping costs to 94549?

-Serge

[CyBrCrSt]

would any of these fit an 02 330i

oh and thanks for the vote

[m3ltw98]

Still have the Sunbelt throttle conversion Bryan? Does it come with the appropriate throttle cable? Let me know. Thanks!

[futureroadracer]

What engine is the heads and cams for? PM price and specs.

Ryan

[Ace and Ivy M3]

The S52 Head and Cams, Im interested in them,

About How much for them (if still available)

Im in 90605

[samiam3356]

This thread is old but it is still in your sig. Do you still have the cams for sale?