Former Mod
I want to make a database of different exhaust options for people to look at and listen to before making their decision. Please post what you have in this thread. Perferably: a picture of the system installed, price, performance claims, weight, and a video of the sound.
Thanks
Forum Rules___Info for New Members___Teen Driving School in So Cal
"It's the internet by my rules."--Kevlar
Member
Mr. Steal yo girl
Make: Eisenmann
Model: Sport
Tip Size: 2x76
MSRP:$1200-1350
Performance Claims: 6.4% HP gain, the flow restriction is reduced to 20.2%-25.5% vs. the stock flow restriction of 43%, and the weight is reduced by 70%
Note: This exhaust is reported to be 3db louder then stock
Video:
Also, in the video, you should note that I do have a Conforti CAI.
Last edited by WoLF; 03-25-2013 at 12:36 PM.
layo and bushwacka!
this is my 325xi with the active autowerke gen II
resonator delete..
Last edited by WoLF; 03-25-2013 at 12:36 PM.
past cars 99' 328i, 01' 325xi, 97' m3/4/5, 00' 540i-6, 01' 325ci-5, 93' 325i-5, 00' ///M5, 95' 325i
present 98' 740il,98' ///M3
Hawaii 3.0
Make: UUC
Model: TSE3 light
2001-2005 E46 330, 325
(fits all i/Ci/Touring/Cabrio models)
Tip Size: twin round 3", staggered Corsa "Pro" tips
MSRP:$699
Performance Claims: haha
Note: fully emissions-legal in all 50 states
The all-new TSE3 "Light" is an affordable rear section exhaust for '00-'05 330 and 325 models (i, Ci, iT, Xi) giving a very sporting yet subdued sound. Guaranteed absolutely no cabin "drone", this exhaust is the perfect upgrade for the enthusiast driver that wants "a little more" without going for the ful TSE3 cat-back.
Video (both resonators on):
http://www.youtube.com/watch?v=J2ghwLbx9zQ
http://www.youtube.com/watch?v=bBxGU3cQQDo
Last edited by WoLF; 03-25-2013 at 12:37 PM.
BFC: The land of BMW nerds, snobs, noobs, thread jackers, cheapskates, clear corner modders, small wheel lovers, and people who don't know how to use "your/you're"
Auto-X Junkie
Rogue IKON Exhaust; I'll post info later
http://www.youtube.com/watch?v=Q72N0d-m3gk
http://www.youtube.com/watch?v=G58ssVlXax8
Last edited by WoLF; 03-25-2013 at 02:17 PM.
2015 ProSolo STX Class Champion
Member
Magnaflow 14815 with Resonator Delete.
Last edited by WoLF; 03-25-2013 at 12:43 PM.
Dinan CAI, Magnaflow w/ Res Delete, Angel Eyes
Member
Type: UUC Full cat-back exhaust. With first resonator delete (the one closest to the engine)
Price: New $1300 but I have seen plenty of used one for around $700-$800. I paid $650 for mine.
I haven't noticed any performance gains, but their website says it gives the car some, but I do not have a dyno.
I love it. It's pretty quite below 3.5k RPM in the car and then it opens up. I will try to get an in car video soon.
http://s205.photobucket.com/albums/b...t=DSCN0691.flv
sorry I do not know to imbed video.
I distrust those people who know so well what God wants them to do because I notice it always coincides with their own desires. - Susan B. Anthony
Member
I didn't want a "loud" exhaust. Just a bit louder than stock with more deep grumble to it so this is what I did on my 330ci. I just removed the first resonator (the large one) and I did the "golf tee mod" on the butterfly valve and retained the stock muffler and second resonator (to keep it from being raspy). I am very happy with how it turned out. C&C welcome
-Travis-
"What's a bimmer?"
Member
Kpeng Special that is broken in now about 7500 miles on it.
Last edited by WoLF; 03-25-2013 at 12:34 PM.
Member
330ci Stock exhaust, both resonators deleted, butterfly valve removed, ACS tips.
It is a bit deeper than the vid but you get the idea... no drone.
Last edited by WoLF; 03-25-2013 at 12:34 PM.
-Travis-
Member
I am not much of an internet person so I am not sure how you upload a video, I have one of a Borla catback with K&N cold air intake that I would be willing to post, but either I need guidance, or someone I can send it to to get it posted I guess.
I think I got it figured out.
BMW 325i with BORLA catback exhaust and K&N cold air filter. I believe that I paid about $1300 for exshaust and about $350 for intake, plus labor I think it was about $1900
Last edited by WoLF; 03-25-2013 at 12:35 PM. Reason: Automerged Doublepost
Member
Ebay headers with stock exhaust
inside the car
http://www.youtube.com/watch?v=6uF7ddnEL6Y
driveby
http://www.youtube.com/watch?v=YkcTclqNkfc
Last edited by WoLF; 03-25-2013 at 12:35 PM.
Member
haha resonator followed by straight pipes.
PS this is not me.
Last edited by WoLF; 03-25-2013 at 12:26 PM.
-///Mike ///Michael ///Mikey
pwn noobs /thread
Member
mmm... no Cat Convertor + small silencer, ending with straight pipes.
Has a nice pitch at high revs ; ]
Sucks that I think it triguered my SES... now it goes and comes.
PS: + CAI helps the harmony
http://www.youtube.com/watch?v=74LzqPx1S64
Last edited by WoLF; 03-25-2013 at 12:27 PM.
Andy
'98 328Is Arktissilber l OZ Futura 17x9 et18 & 17x10.5 et37 l BC BR
BC Racing l ECS Tunning l TheBMWPartsStore.com
Member
kinda crappy video. but you get the idea.
straight pipes from the back resonator.
it was a little windy
Last edited by WoLF; 03-25-2013 at 12:32 PM.
Member
Bleh, excuse me...custom quads. Sry for the mixup!
This guy has a good set-up.
Last edited by WoLF; 03-25-2013 at 12:32 PM.
Member
Custom quad done at High Velocity Auto in NJ
$350
|AFE Intake|ZHP Shift Knob|Smoked Corners, Side Markers and Tails|Blacked Out Grill|Blacked Out Emblems|Umnitza Predator Orion V2 Angel Eyes|M3 Trunk Lip|Eibach Pro-Kit Springs|18" VMR GunMetal CSL Reps|M3 Front Bumper|B&M SSK|Carbon Fiber M3 Fog Light Covers|30% Tint|6000K Bulbs|ACS Roof Spoiler|MVR Front Lip|
Hit the clutch, hit the gear, hit the gas & Im gone
Member
http://www.youtube.com/watch?v=ExI5Mv8c-Ow
Drive by vids were requested a while ago.. finally got around to it.
Muffler delete and home made cold air intake.
Last edited by WoLF; 03-25-2013 at 12:26 PM.
-///Mike ///Michael ///Mikey
pwn noobs /thread
Extremely special Member
My 330i with a magnaflow muffler
Last edited by WoLF; 03-25-2013 at 12:25 PM.
Member
Supersprint catback Exhaust w/K&N cone intake
-No resonators
-Straight pipe - dual 2.5"
-OEM headers/cats
Power
- Maybe a tiny bit in the midrange.
Sound
- A bit louder than stock ZHP.
- Small pitch raise at idle.
- Screams slightly louder at medium to redline.
- Burble on deceleration from 1,800RPM down to 1,000RPM after a minor throttle blip
Exterior Sound:
http://www.youtube.com/watch?v=5VRB9uVCjN8
Interior Sound:
Last edited by WoLF; 03-25-2013 at 12:25 PM.
--Trevor--
Member
NO cats dinan cai stock muffler
Last edited by WoLF; 03-25-2013 at 12:24 PM.
ADDICTION
Member
My setup on my 325, Eisenmann backbox with no other mods.
http://youtu.be/h07iqqUTkGM
Last edited by WoLF; 03-25-2013 at 12:25 PM.
Posting Permissions
Reply With Quote
Bookmarks