Prices are listed as cash prices, those through paypal will have additional paypal fees and shipping fees. Shipping for some of these items varies! I would rather deal locally with the larger items that cost a lot to ship.
I am parting out my beloved e36 328i because i hydroplaned into a guardrail, spun and hit the center divider so there are obviously a lot of exterior that is no good.
I have driven the car around since the wreck, and the car still drives completely straight, no noises or vibrations of any kind. So I can guarantee that the suspension bits are good!
The car is arctic silver, with dove gray interior. I have put an extensive amount of time, work and money into this car so there are a bunch of goodies for all to have.
Engine:
-S52 from a 97 M3, there are about 180000 miles on the motor i believe, but it runs strong with out issues. I had it in the car for about 7000 miles. The bad is that during the impact the coolant reservoir cracked the valve cover a little so ideally that should be replaced. This does not affect the engines performance. For the engine complete from the throttle body, harness intake manifold and maybe stock exhaust manifolds, and stock pullies if i still have them all. The power steering pump has about 5000 miles on it and I paid 400 for it alone! I would like to get 1700.
-RE power Pullies - good shape, no issues- 130
- M50 intake manifold 75
- Spal 16 in puller fan. This is the bimmerworld kit that includes lower temp fan switch, wiring harness. SOLD
- Custom exhaust system, ebay stainless headers, duel 2 inch pipes with high flow cats into a UUC system U cat back. This is built to use v bands for a long lasting leak free system. this is pretty loud but sounds great, and will open up some power. 800
- stock obd2 midpipe in good working condition - sold
Drivetrain
-Zf 5 speed transmission.- sold
- UUC 8.5 ltw flywheel with e34 m5 clutch. -sold
- LSD from an M3, i believe its a 3.23. honestly unknown miles but it works flawlessly! 350
Suspension
- H and R cup kit with Ground control street camber plates and turner motorsports aluminum replaceable bushing rear shock mounts. 650 - sold
- Sway bar tab reinforced rear subframe with power flex bushings - sold
- non m front sway bar
- Adjustable rear lower control arms, eibach aluminum. 150 - sold
Brakes
- M3 brakes! Can get the whole swap together and price accordingly. Front rotors are euro floating and would include the m3 master cylinder. UUC brake lines.
- low milage front non m control arms
Interior
- Vaders, manual and heated dove vaders. good condition Sold
These are pretty much the highlights of what I am parting out. Please feel free to ask questions via this thread or PM. I am sure there are a ton of things I forgot to include in here. such as spare alternator, wiring harness m52 intake.
e36 sedan fit kit for thule feet and e36 sedan - sold
Last edited by AggroRider1; 02-22-2012 at 02:21 PM.
oh man sorry to hear/see that.
Side moldings?
Last edited by AggroRider1; 12-21-2011 at 11:18 AM. Reason: Automerged Doublepost
Are your headlights damaged? If not, what are they?
e36 sedan fit kit for thule load bars - 35 - are they needed for a coupe? What's in the kit?
Thanks
condition of shift boot?
pm me, o and 91344 zip code if your willing to ship
how much for mid pipe/ cats shipped to 33603?
SQ BIMMER N MARIO8139 RIPPED ME OFF $200 .
selling side skirts??
Not really. Its only good to part out anyways and I wouldnt get nearly enough from that.
Yes, pm me an offer
Took some pictures of some of the spare things I have laying around.
Alternator, starter, m/s52 intake manifold, m/s50 intake manifold, good working secondary airpump whole setup, m52 computer.
I also have another rear subframe in storage.
Last edited by AggroRider1; 12-22-2011 at 01:12 PM. Reason: Automerged Doublepost
how much do you want for the nose clip that the grill clips into? n how much for the exhaust manifold n how much for intake manifold?
bump
that really does suck. You put alot of work into that thing too.
Interested in selling the rear driver side door lock latch? The part that keeps the door closed. Right after I swapped in your m52, it just stopped working. Now my door won't stay closed.
Last edited by BMWMPow3r; 12-27-2011 at 04:02 PM.
I am looking for e36 intake, throttle body, bimmerworld asc delete elbow and maf.
Last edited by Jackula; 12-29-2011 at 08:25 PM.
What diameter, 3" or 3.5" and how much $ ? Thanks for your time.
I want the boot and intake. Do you accept paypal?
Last edited by Jackula; 12-30-2011 at 07:29 PM. Reason: Automerged Doublepost
wheels? how much shipped to 95825
Driver's door panel - dirty or worn yellow spots? Also might need a door handle assy too. $?
Thanks.
Last edited by Mless5; 12-30-2011 at 09:22 PM.
how about the rear wheels?
98 328i 4DR
Sierrarot Metallic (Paint Code: 357)
AA Gen 3, Eurosport Conforti Intake, M50/S52 with specific Shark Injector, X-brace, Bilstein Sports/H&R Sports for M3, Mason Engineering Strut Brace, UUC Swaybarbarian, E39 M5 OEM lip spoiler, Polished LTW wheels, TSX retrofit, Lubro Moly, Pentosin and Ate fluids
Bookmarks