Hello,
As a companion to the openOBC project (which is NOT dead), I've decided to start an ADS interface of my own. The main goals are as follows:
1) Small footprint PCB
2) Open source (schematics, BOM, and PC board layout freely available)
3) Possibly offering kits once I prove the design (pending forum sponsorship).
This is based off a similar MAX232/74HC00 design I found floating on the web. I've improved it by adding some additional filtering, and switched to a smaller, LDO (low drop-out) voltage regulator IC that I've used in other designs.
I plan to use the same ISO9141 interface ICs in the openOBC project (L9637), link here: http://search.digikey.com/scripts/Dk...41245454577738
Hopefully in proving this design, I can better understand how ADS works and finalize the D-BUS connection in the openOBC so that project can finally be completed.
Preliminary schematic (untested):
Last edited by m2pc; 10-17-2011 at 05:44 PM.
1999 ///M3 TiAg | Heated Power Vaders | DDM Projector36 5000K 55W HIDs | DDM 3000K 35W HID Fogs
DDM Smoked Corners | DDM Weighted Shift Knob | K&N CAI | Mishimoto AL Rad w/Zionsville AL Shroud
Stewart HiPo Water Pump | Samco Hose Kit | 16" SPAL Puller Fan | Viper 5701LE Security
E36 OBC is now open! Join the effort: BF.C Thread | openOBC Wiki
I'm very interested
A hundred years from now it will not matter what my bank account was, the sort of house I lived in, or the kind of car I drove. But the world may be different, because I was important in the life of a child.
for Zach, Everett, and Lilly
Ladies and gentlemen, we have a PCB layout:
1999 ///M3 TiAg | Heated Power Vaders | DDM Projector36 5000K 55W HIDs | DDM 3000K 35W HID Fogs
DDM Smoked Corners | DDM Weighted Shift Knob | K&N CAI | Mishimoto AL Rad w/Zionsville AL Shroud
Stewart HiPo Water Pump | Samco Hose Kit | 16" SPAL Puller Fan | Viper 5701LE Security
E36 OBC is now open! Join the effort: BF.C Thread | openOBC Wiki
Really good work!!!
You should probably remove "BMW" from the PCB. They might not like you putting their trademark on your product.
Last edited by m2pc; 10-17-2011 at 02:02 PM. Reason: Automerged Doublepost
1999 ///M3 TiAg | Heated Power Vaders | DDM Projector36 5000K 55W HIDs | DDM 3000K 35W HID Fogs
DDM Smoked Corners | DDM Weighted Shift Knob | K&N CAI | Mishimoto AL Rad w/Zionsville AL Shroud
Stewart HiPo Water Pump | Samco Hose Kit | 16" SPAL Puller Fan | Viper 5701LE Security
E36 OBC is now open! Join the effort: BF.C Thread | openOBC Wiki
What??
Binary Message Within ???
A hundred years from now it will not matter what my bank account was, the sort of house I lived in, or the kind of car I drove. But the world may be different, because I was important in the life of a child.
for Zach, Everett, and Lilly
Update: I just placed an order for a batch of 20 boards. If the first one proves successful, the remaining 19 may be available. I need to get with Kevlar re: forum sponsorship if I am to sell items openly on here.
FYI, I updated the schematic in first post to correct some issues.
Last edited by m2pc; 10-17-2011 at 05:45 PM. Reason: Automerged Doublepost
1999 ///M3 TiAg | Heated Power Vaders | DDM Projector36 5000K 55W HIDs | DDM 3000K 35W HID Fogs
DDM Smoked Corners | DDM Weighted Shift Knob | K&N CAI | Mishimoto AL Rad w/Zionsville AL Shroud
Stewart HiPo Water Pump | Samco Hose Kit | 16" SPAL Puller Fan | Viper 5701LE Security
E36 OBC is now open! Join the effort: BF.C Thread | openOBC Wiki
Update: Boards arrived yesterday (I will post pics once I get back to the office). Everything looks great except I forgot to include R3 and R5 (the bus pull-up resistors) in the layout. I'll have to solder those in by hand after I get the rest of the board built.
Today I received the ISO9141 ICs and the rest of the parts to make the first test PCB.
1999 ///M3 TiAg | Heated Power Vaders | DDM Projector36 5000K 55W HIDs | DDM 3000K 35W HID Fogs
DDM Smoked Corners | DDM Weighted Shift Knob | K&N CAI | Mishimoto AL Rad w/Zionsville AL Shroud
Stewart HiPo Water Pump | Samco Hose Kit | 16" SPAL Puller Fan | Viper 5701LE Security
E36 OBC is now open! Join the effort: BF.C Thread | openOBC Wiki
how much will it cost?
1999 ///M3 TiAg | Heated Power Vaders | DDM Projector36 5000K 55W HIDs | DDM 3000K 35W HID Fogs
DDM Smoked Corners | DDM Weighted Shift Knob | K&N CAI | Mishimoto AL Rad w/Zionsville AL Shroud
Stewart HiPo Water Pump | Samco Hose Kit | 16" SPAL Puller Fan | Viper 5701LE Security
E36 OBC is now open! Join the effort: BF.C Thread | openOBC Wiki
very interested in one of these!
instead of 74HC00 can i use 74HCT00 IC's ? it's cmos/ttl level signals
http://www.nxp.com/documents/data_sheet/74HC_HCT00.pdf
http://www.interfacebus.com/voltage_threshold.html
Nice! Does it verified working? I would love to know. I can help to make it a USB version.
everywhere on this forum you can find people asking for a USB ADS interface. well, there are some mods you can make, but is no guarantee it will work
that is , because BMW engineered their software and interface in such way that you cannot use a usb emulated serial port( i have read and searched to what other active members in this forum like M2PC and Benemorius have done), it's have to be a native one. why bother to change com port assignment , to make the usb serial port become com 1, when you can buy a crappy old laptop that has a NATIVE serial port, and use it ?? you don't need NASA power for using INPA
you are not playing games on it , you use it to program the ECU via the rs-232 protocol and interface, similar to writing a BIOS. If you are interested, RS 232 is pretty much like Morse Code.(Wiki quote >>>The current version of the standard is TIA-232-F Interface Between Data Terminal Equipment and Data Circuit-Terminating Equipment Employing Serial Binary Data Interchange, issued in 1997.<<<)
So , forget about doing useless things and concentrate to the real issues.
TA - TA !!
Hello thank you for this schematic,its working well on one BMW 520i E34 from 1995 wits Siemens MS 40.1 ecu.
Bookmarks