Bimmerforums - The Ultimate BMW Forum

Go Back   Bimmerforums - The Ultimate BMW Forum > Bimmerforums - General BMW > Diagnostic Software
Reload this Page Settings in GT1/DIS to use the Inpa Interface ?
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read
TireRack Garage Homepage Supporting Vendors Articles Online Store Photo Gallery Forum Rules Advertising

Diagnostic Software Do you need help with diagnostic software or have installation questions? DIS, INPA, EDIABAS, IBUS, CANBUS, CARSOFT

Reply
Page 8 of 8 1234567 8
 
Thread Tools
  #176  
Old 10-25-2009, 01:59 PM
ian s ian s is offline
Member
  
Join Date: Jul 2009
Location: UK
Cars: E36 M3 Evo
Posts: 11
iTrader: (0)
That's very helpful, thank-you. I set up a continuous ping from the host and the LED's lit up.

Time to take a look at the host side of things...

Ian
Reply With Quote
  #177  
Old 10-25-2009, 02:27 PM
aise aise is offline
Member
  
Join Date: Sep 2006
Location: Estonia
Cars: BMW 530i 2001
Posts: 8
iTrader: (0)
iīve got it. i removed network adapters .31 and .32 from unix and both leds are on before that the ifhservice took .32 but i figured it should take .30 wich is DISīs IP so i removed those 2 devices
Last edited by aise; 10-26-2009 at 05:09 AM.. Reason: Automerged Doublepost
Reply With Quote
  #178  
Old 10-27-2009, 07:47 AM
susha1 susha1 is offline
Member
  
Join Date: Oct 2009
Location: london
Cars: chevvy
Posts: 25
iTrader: (0)
what do you mean ......i mean i am not very much clear with it.....you want a cheap one??

Susha BMW Performance Chip
Last edited by susha1; 11-04-2009 at 04:16 PM..
Reply With Quote
  #179  
Old 10-27-2009, 10:48 PM
capstorm capstorm is offline
Member
  
Join Date: Oct 2009
Location: UK
Cars: BMW 316i E36
Posts: 3
iTrader: (0)
Hello guys,

I'm trying to run EDIABAS / INPA on WinXP laptop, and to connect to Diagnostic Head over cross-over cable and TCP/IP.
I'm not sure what IP to put for RemoteHost in ediabas.ini. IP of PC running INPA or Diagnostic Head IP?

I tired with both but same result, always timeout error. I also cannot start ifhserv32.exe. Double-click on it does nothing. I cannot see that process in Task Manager. So I think there lies a problem but I don't know hoe to solve it

Can anybody help?

Thanks in advance!
Reply With Quote
  #180  
Old 10-28-2009, 06:21 AM
Rallyfinnen Rallyfinnen is offline
Member
  
Join Date: Jul 2009
Location: Sweden
Cars: 740, 850, M3
Posts: 38
iTrader: (0)
So you have a real yellowhead connected via LAN, not a OBD cable?
I think you don't need ifhserv with the yellowhead, you only need to get the virtual DIS machine to be able to connect to your network card in the host (XP?)
Try to use vmnet0 in the virtual machine and make sure vmnet0 is connected to you LAN card. Hope that helped.
Reply With Quote
  #181  
Old 10-28-2009, 08:41 AM
capstorm capstorm is offline
Member
  
Join Date: Oct 2009
Location: UK
Cars: BMW 316i E36
Posts: 3
iTrader: (0)
Quote:
Originally Posted by Rallyfinnen View Post
So you have a real yellowhead connected via LAN, not a OBD cable?
I think you don't need ifhserv with the yellowhead, you only need to get the virtual DIS machine to be able to connect to your network card in the host (XP?)
Try to use vmnet0 in the virtual machine and make sure vmnet0 is connected to you LAN card. Hope that helped.
Yes, that is correct. I have real yellowhead . Is it possible to use it only with INPA without DIS?
IP of EDIABAS station is 192.168.68.50 and yellowhead has IP 192.168.68.22. What IP address should I put in ediabas.ini?

Thanks!

Just one update to my previous post. I also have OPPS head. My intention is to use only INPA and heads, connecting to them remotely over TCP/IP.

In ediabas.ini under "Interface" I tried "REMOTE" and "REMOTE:Remote.ini" parmeters but it doesn't help

When using REMOTE I'm getting error:
EDIABAS Fehler 159, NET-