Results 1 to 24 of 24

Thread: 1994 e36 325 convertible parting out

  1. #1
    Join Date
    Feb 2013
    Location
    Alcoa, TN
    Posts
    122
    My Cars
    1994 325i convertible

    1994 e36 325 convertible parting out

    I just picked up an e36 convertible parts car. My plan is to use the engine and transmission and few other little parts but everything else up for grabs.
    Car is dark blue (white hood) with tan interior and a blue soft top.
    Doors, trunk lid already gone.

    Car is located outside Knoxville tn. I'll take some pictures and post asap. It's at a friend's house so I can't just get pics right away.
    Let me know what you need, make me fair offer and its yours. I can ship but will take a few days to get out together.

  2. #2
    Join Date
    Feb 2013
    Location
    Alcoa, TN
    Posts
    122
    My Cars
    1994 325i convertible
    I'm headed over to where car is stored tomorrow to get some pics and remove a few parts. Let me know if anyone needs anything else or any pics.

  3. #3
    Join Date
    Feb 2013
    Location
    Alcoa, TN
    Posts
    122
    My Cars
    1994 325i convertible
    Here are a few pics of some parts people have asked about












  4. #4
    Join Date
    Feb 2013
    Location
    Alcoa, TN
    Posts
    122
    My Cars
    1994 325i convertible

    Updated pics










  5. #5
    Join Date
    Feb 2013
    Location
    Alcoa, TN
    Posts
    122
    My Cars
    1994 325i convertible
    Bump-
    Fenders $35
    Hood -$sold
    Seats- $50 fronts (set)
    Seats- $40 rear (top, bottom, center)
    Top -$250
    Top Motors -$one sold, $60
    Exhaust manifold- $20
    Mid-pipe- $sold
    Cat-back -$30 stock
    Calipers -$10 per
    Rear subframe -$50
    Rear trailing arm -$40 (right)
    ABS pump (untested, car wasn't drivable when I picked up) - $30
    Monroe Struts/Shocks/lowering springs- $sold
    Dash- $40
    Tail lights - $sold
    Carpet -$30
    Glove box -$20
    Stock radio -$sold
    Box -$sold
    Radiator -$sold


    List goes on and on. Just let me know what you need.

    Prices don't include shipping,
    Last edited by cgborders; 07-11-2015 at 06:29 PM.

  6. #6
    Join Date
    May 2005
    Location
    Diamond Bar, CA
    Posts
    1,051
    My Cars
    97 M3/2/5
    11 button obc 100% working? No dead pixels?
    Current cars:
    87' Zinnorot 325is
    91' Alpine white 318is
    92' E30 Alpine white Mtechnic
    97' E36 Alpine white M3/2/5

  7. #7
    Join Date
    Feb 2013
    Location
    Alcoa, TN
    Posts
    122
    My Cars
    1994 325i convertible
    Quote Originally Posted by hakstern View Post
    11 button obc 100% working? No dead pixels?
    Sorry, not 100% sure on condition. The car was partially disassembled when I got it so I couldn't check all the systems. My car has 18 button, otherwise I'd just switch it out and test it. If you want to gamble with it and see you can have it for $15 shipped. Sorry I don't have better info on it.

  8. #8
    Join Date
    Feb 2013
    Location
    Alcoa, TN
    Posts
    122
    My Cars
    1994 325i convertible
    Bump.

    Gauge cluster $50 - working order, 219k miles
    Wiper motor $25
    Heater blower $30
    Headlight switch with vent $15
    Rear trailing arm $30
    Rear side window glass $15
    Passenger side front glass $20
    Bumpers $15-30


    Etc. Etc.

  9. #9
    Join Date
    Dec 2012
    Location
    MD
    Posts
    41
    My Cars
    e36 turbo 5.0/e36 s52
    how much for both convertible top motors?

  10. #10
    Join Date
    Feb 2013
    Location
    Alcoa, TN
    Posts
    122
    My Cars
    1994 325i convertible
    Quote Originally Posted by killachi View Post
    how much for both convertible top motors?
    Only have one of two left. $65 shipped

  11. #11
    Join Date
    Mar 2011
    Location
    clinton,sc
    Posts
    169
    My Cars
    1998 bmw 740 il
    Cd player?

  12. #12
    Join Date
    Feb 2013
    Location
    Alcoa, TN
    Posts
    122
    My Cars
    1994 325i convertible
    Quote Originally Posted by damaxima View Post
    Cd player?
    Not factory one- came with Tape deck. I have 2 aftermarket units but no BMW ones, sorry.

  13. #13
    Join Date
    Nov 2014
    Location
    O-H - I-O
    Posts
    393
    My Cars
    94 325is+325ic, 04 330ci
    What color are the seats, I'd imagine beige by the color of your dash but they kind of look dove grey also, lol do you have the little slide in things that hide the rod covers when the top is down? and what condition is the rear seat in? depending on color I'd be interested

  14. #14
    Join Date
    Feb 2013
    Location
    Alcoa, TN
    Posts
    122
    My Cars
    1994 325i convertible
    Seats are tan. The rear seat leather is pretty dried/ cracked.

    I think I have those covers; I'll check to make sure when I get home.

  15. #15
    Join Date
    Dec 2009
    Location
    Los Angeles, Ca
    Posts
    846
    My Cars
    1995 332i
    manual? wiring harness?

  16. #16
    Join Date
    Feb 2013
    Location
    Alcoa, TN
    Posts
    122
    My Cars
    1994 325i convertible
    Quote Originally Posted by la36bmw View Post
    manual? wiring harness?
    Yes its manual- What are you looking for? Using some of the parts for manual swap.

    What wiring harness do you need?

    Shoot me PM with what you are looking for.

  17. #17
    Join Date
    Nov 2014
    Location
    O-H - I-O
    Posts
    393
    My Cars
    94 325is+325ic, 04 330ci
    See if you have those rod covers?

  18. #18
    Join Date
    Feb 2013
    Location
    Alcoa, TN
    Posts
    122
    My Cars
    1994 325i convertible
    Quote Originally Posted by pablowski View Post
    See if you have those rod covers?
    The covers are there but they are missing the part that slides to close then. Sorry

  19. #19
    Join Date
    Feb 2013
    Location
    Alcoa, TN
    Posts
    122
    My Cars
    1994 325i convertible
    BUMP

    Top, hood, radio, glovebox, doors, climate control, tail lights, mid-pipe, Engine/ trans, struts/ springs, etc SOLD!

    Still have lots of parts- fenders, dash, top motor, tonneaux cover, muffler, electronics, visors, seat belts, etc still available.

    I've pulled what I need to now its just taking up room. Anything left will get rid of cheap. Just let me know what you need.

  20. #20
    Join Date
    Feb 2013
    Location
    Alcoa, TN
    Posts
    122
    My Cars
    1994 325i convertible
    More pics- got lots to sell, Cheap!



















    Last edited by cgborders; 07-24-2015 at 09:19 PM.

  21. #21
    Join Date
    Feb 2013
    Location
    Alcoa, TN
    Posts
    122
    My Cars
    1994 325i convertible
    BUMP- Time to get rid of what's left- Nothing priced over $50 and most parts way less.

    Here is a list of other e36 parts I have besides vert parts:
    Rear seat - sedan, tan
    Front seats- sedan, tan
    Front seat belt buckles
    Dash , tan,
    Door panel- front, passenger, convertible, tan, insert pulling away from main panel
    kick panels- sedan tan
    door sills -sedan, tan
    Fender - drivers, sedan, black
    Door -Passenger, front, sedan, black
    Window glass - Passenger, front, sedan, black
    Door handle, latch, wiring -Passenger, front, sedan, black
    Amber front corner lights (3 sets), coupe/convertible
    Water Pump
    Slave cylinder - x2
    Door glass- passenger front - one for sedan, one for vert
    Trunk lid hinges
    Rear speaker box/ mounts - coupe (2)
    Rear speakers mounts - convertible (2)
    Front door card speakers
    Metal window tract - Vert, passenger
    Trunk latch molding - sedan
    Inside door handles - coupe and sedan- passenger
    Outside mirror -sedan, passenger, black
    Exterior trim/ molding -convertible, passenger door
    Window regulators and motors - several, different cars
    Door card coin boxes- SOLD
    center console - tan, no arm rest model
    Headlight switch with vent and housing
    seat belt buckle
    Passenger door parts (actuators, hinges, wiring)- Vert

  22. #22
    Join Date
    Oct 2015
    Location
    Silver Spring, MD
    Posts
    1
    My Cars
    BMW e36 convertible
    I read the description for the driver door panel insert, you mentioned the insert is pulling away from the panel. Is the material for the panel bubbled as well?

  23. #23
    Join Date
    Feb 2013
    Location
    Alcoa, TN
    Posts
    122
    My Cars
    1994 325i convertible
    Quote Originally Posted by Big Ezzy View Post
    I read the description for the driver door panel insert, you mentioned the insert is pulling away from the panel. Is the material for the panel bubbled as well?
    No, leather on the panel is still in good shape. I pulled it out to look it over well and pockets do need to be reglued. $20 plus shipping if anyone wants it.

    I've got pictures but for some reason they aren't working to load them anymore. I can email them directly.

  24. #24
    Join Date
    Aug 2014
    Location
    Denver, NC
    Posts
    2
    My Cars
    1995 325i Convertible
    I'm looking for some door panels driver and passer beige for 95 325 convertible.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •