Butters project GO-FAST (LOUNGE STYLE)

[pbonsalb]

Can't use S50 piston with S52 crank. Different stroke of cranks require different pin heights in the pistons for the rod (the rod remains unchanged across the S50, M52, S52 range).

[Butters Stoch]

Can't use S50 piston with S52 crank. Different stroke of cranks require different pin heights in the pistons for the rod (the rod remains unchanged across the S50, M52, S52 range).

Correct. But S50 and S52 same bore

[pbonsalb]

I thought 86.0 mm for S50 and 86.4 mm for S52.

[spenka]

I thought 86.0 mm for S50 and 86.4 mm for S52.

I thought the same too!. I am almost sure of it till now.

[Butters Stoch]

I really don't know as I don't have either. But was under the impression bore same. Or maybe M5Xs are the same.

[GG///M3]

I really don't know as I don't have either. But was under the impression bore same. Or maybe M5Xs are the same.

I believe the bore is correctly the same for the s50/52, but the s52 a larger stroke for stroking. The s50 is what some would call a square motor where the bore and stroke are the same. Which is supposed to make for a better balanced motor/ rev happier

[Butters Stoch]

I believe the bore is correctly the same for the s50/52, but the s52 a larger stroke for stroking. The s50 is what some would call a square motor where the bore and stroke are the same. Which is supposed to make for a better balanced motor/ rev happier

The M52 is square 84x84 this I know.

The s50 might be 86x86 ?

[cj.surr]

The all-knowing wikipedia...

http://en.wikipedia.org/wiki/BMW_M50

http://en.wikipedia.org/wiki/BMW_M52

[GG///M3]

The M52 is square 84x84 this I know.

The s50 might be 86x86 ?

Correct

- - - Updated - - -

The all-knowing wikipedia...

http://en.wikipedia.org/wiki/BMW_M50

http://en.wikipedia.org/wiki/BMW_M52

Hi 5

[milKt]

Good data.
No suppositions.

[Butters Stoch]

Good data.
No suppositions.

[spenka]

Next question. ....
Can the crankshaft sensor gear on the m54/s52 crank be removed?
Nate on the Forum says it can. He has a crank I'm buying but the pics he sent me doesn't have the gear at all.

[milKt]

Next question. ....
Can the crankshaft sensor gear on the m54/s52 crank be removed?
Nate on the Forum says it can. He has a crank I'm buying but the pics he sent me doesn't have the gear at all.

Nate is KrrKt, the gear can be bolted onto another OBDII (M52/S52 crank).

Butters,
can I suppose that was a type of sandwich?

[Butters Stoch]

Nate is KrrKt, the gear can be bolted onto another OBDII (M52/S52 crank).

Butters,
can I suppose that was a type of sandwich?

Bip, an ice cream Halloween special treat for my internet forum friend. Dig in , enjoy , I have missed you my friend. It hasn't been the same. Don't cry , or weep, we are out of tissues.

[Turbo ///M50]

Butters those drag videos are crazy, that's one hella fast car you got there..

[Butters Stoch]

Butters those drag videos are crazy, that's one hella fast car you got there..

Incorrect.
We used matchbox cars with some good editing. Car is actually stock. But makes a good movie film ; )

[GG///M3]

Very special

[Butters Stoch]

Very special

Yes. And when we build our hot wheels ramp , it will be even faster.

[Tristo]

Tearing the intake manifold off and doing the Butters vacuum mod!

[flyfishvt]

Yes. And when we build our hot wheels ramp , it will be even faster.

I'm ready

[milKt]

I'm ready

Where purchased?
ASAP pls.

[flyfishvt]

Where purchased? ASAP pls.

It was a surprise from a friend in SoCal.

[Butters Stoch]

Since we are on the subject of toy cars. I'm auctioning a NH state police cruiser on eBay.
This will/should bring me in thousands . its die cast .
http://pages.ebay.com/link/?nav=item...508284&alt=web

Picture of said car

[dohcdoh]

Tearing the intake manifold off and doing the Butters vacuum mod!

Butters did the hair dryer mod?

[GG///M3]

Tearing the intake manifold off and doing the Butters vacuum mod!

Pics or it never happened.

Where purchased?
ASAP pls.

Yes where?