Feeler: WTT Turbo e36 M3 for e46 m3

[cmzwirner]

EDIT: Engine is "blown". No compression in all cylinders. I do NOT feel like touching this. I am tired of the car. Come and take it from my driveway for $9,000. It most likely just needs a rebuilt head because of bent valves.

If you DIY, have fun with your new $10,000 450WHP turbo M3.

Id consider trades for the non bi-turbo S4's, 330i's and 330ci's, e46 m3's, etc.

Please PM me with any inquiries.[/B]

38mm Ported SPA Manifold
Precision JB Billet PT6262 .82
TiAl 38mm Wastegate/DP OPEN DUMP
TiAl 50mm BOV
CXracing 24x12x3 Core Intercooler
Powdercoated IC Piping
Custom 304 SS Catless 3" Exhaust/DP
NickG Tuning/60lb Injectors/MAF
TRM turbo engine mount
CES cut-ring headgasket and ARP studs
Southbend stage 4 feramic clutch kit
Innovate LC-1
Autometer mechanical boost gauge


Other stuff:
Completely overhauled cooling system
Ground control 500/400 coilovers
All weak points welded and reinforced
Reinforced and powdercoated rear subframe
AKG poly subframe and diff bushings
All rotational bushings replaced with OEM rubber
Rogue engineering SSK
Resprayed nose panel and bumper

There is probably a bunch of other stuff i am forgetting. It is a fully rebuilt M3. One of the cleanest and fastest examples in the US. A non-boosted M3 in this condition is worth around 12k. With a high quality turbo kit, along with a clutch and full exhaust it is right around $20,000.


Im looking to trade for an e46 M3. I dont really care about the color, as long as it isnt topaz blue.

It is also for sale, but a straight up trade would be better.

Pictures:









Exhaust construction:


Random garage metal ftw!






Engine bay shots:






Rear subframe overhaul:










Clutch:




10 PSI Dyno run:
The x-axis is way off. I dont know why. Torque should cross at like 5250. Im hoping to get a proper dynojet run in soon. Should be somewhere in the 450WHP range on a dynojet.

[e39alpine5]

Damn that's a really clean set up and not half assed like a lot of other e36's out there!! good luck man.

[slidesidewayz]

Sick. I don't have an e46, and don't mind traveling to pick the car up either..
So your asking (if you consider a sale) is $20k??
How many miles on the chassis? Sorry for the strange hr, I work nights

~j

[GWerks]

Let's see more pictures of the exterior/interior!

Nice build BTW

[cmzwirner]

Damn that's a really clean set up and not half assed like a lot of other e36's out there!! good luck man.

Thanks! That what i was going for. The more OEM/sleeper looking the better.

Sick. I don't have an e46, and don't mind traveling to pick the car up either..
So your asking (if you consider a sale) is $20k??
How many miles on the chassis? Sorry for the strange hr, I work nights

~j

I know im not going to get 20k for it. Its an e36 afterall. PM me for more info on pricing.

Let's see more pictures of the exterior/interior!

Nice build BTW

Ask and you shall receive. Ignore the lack of a hood emblem. It ripped off during a 3rd-4th gear pull.

A few more exterior shots:





There is now a US M3 3-spoke wheel in there. The schoolbus steering wheel is gone.




The bolsters on these seats are usually worn and cracked to all hell at this milage. Mine are in great shape.




Here is a dyno pull:
[ame]http://www.youtube.com/watch?v=oc9H3smSEyI[/ame]

Here is the CES Cut-ring install thread:
http://forums.bimmerforums.com/forum....php?t=1835219

Here is the actual build thread:
http://forums.bimmerforums.com/forum....php?t=1747839

My Southbend stage 4 clutch thread
http://forums.bimmerforums.com/forum....php?t=1873356

[Colby Colbs]

too bad I don't have an E46 M3 laying around...

GLWS!

[Bimmerdude88]

Trade for 2001 m3 6speed 77,000 miles

[cmzwirner]

Bump. Im getting away from cars for the time being. This car needs nothing. I have been driving it for a year with no problems.

[burn0utsrfun]

Email please pkanclerski@yahoo.com No PM privilages yet, thanks. - Pat.

[binh]

PM'd you.

[cmzwirner]

Im looking into B7 audis and e46 non M's. Not looking to drive across the country for a trade either.

Id also consider reasonable cash offers. PM me and i will respond. Sorry to any guys i didnt get back to. I have been pretty busy with uni.

[cmzwirner]

[Firefighter]

Man wish this was a 4 door. I have an '04 Audi S4 that I'm wanting to sell.

[cmzwirner]

TTT. Im 100% committed on selling now. Taking offers.

[Messiahlee]

So sweet man GL

[bstylish]

PM'ed!

[DaveD97]

Any interest in my X5?

http://forums.bimmerforums.com/forum...ual-Will-Trade

[cmzwirner]

Engine has bent valves. No compression in all cylinders. Come and trailer it out of my driveway for $9,000. First come, first serve. PM me for more info.

[ChargerdR]

please text me if car is still available, I am in Pa but very interested and will make the drive 717 383 5318

[mainuh325is]

Sold!