Autogeek.net Car Care Products
** 10% off @ Autogeek.net - PinnacleWax.com & Wolfgangcarcare.com - Coupon Code = clubmember
Results 1 to 22 of 22

Thread: 2000 BMW 740i- 20+ Hour Detail

  1. #1
    Join Date
    Mar 2012
    Location
    Kenosha, WI
    Posts
    9
    My Cars
    2008 Evo X

    2000 BMW 740i- 20+ Hour Detail

    I just recently completed a 20+ hour detail on a 2000 BMW 740i. The original plan was to spend about 15 hours but the results wouldn't have been satisfactory for both the client or myself, so I put in some extra time to exceed expectations. The car was just bought from a private seller and brought to me the next day. The car has 112k miles on it and based on the condition of the car it was never really maintained. The front left tire was heavily covered in rust. Some areas as thick as heavy posterboard. (Only thing I could think of to compare it in thickness too lol). According to the previous owner the car was driven and wore the brake pad down completely to the metal. Supposedly the car was still driven causing the metal on metal to cause huge amounts of metal rust particles. This rust was all over the car in the clearcoat down the entire drivers side and even around to the back and there was some on the passenger side but no where near as much.

    Due to the customers budget and time I had available to work on the car the main focus was to clean up the car first focusing on the interior, metal/rust particles embedded into the clear and the heavily contaminated wheel and to correct the paint.

    Car was washed with CG Citrus using Glimour Foam Gun and CG Maxi Suds II using two bucket method. This had no effect on the rust embedded in the car. The only thing that worked was some aggressive claying. Thank goodness for detail clay. I was only able to do a one step correction due to time. I went with surbuf pads on a PC DA using M205 as this seemed to be the best combination. Because the car is a daily driver paint correction wasn't the number one priority but I was happy with the results and so was the client. Tailights and headlights were wet sanded and then polished. Interior leather was conditioned using leatheriqe and all interior surfaces were protected with 303 aerospace protectant. All of the before and after pics can be found at

    www.firstplacedetailing.com
    www.photobucket.com/bigblue740i


















    tman/2000%20BMW%20740i/P1090430.jpg[/IMG]






    Last edited by Will3ptman; 03-12-2012 at 08:40 PM.

  2. #2
    Join Date
    Nov 2006
    Location
    Iowa
    Posts
    1
    My Cars
    2002 525i/5
    That looks like a great detail for 20 hours! I really like that color. What did you use on the wood trim?

  3. #3
    Join Date
    Apr 2010
    Location
    Gilmanton, NH
    Posts
    289
    My Cars
    2003 BMW 530i
    What a mess! 10x better!


  4. #4
    Join Date
    Apr 2010
    Location
    Gilmanton, NH
    Posts
    289
    My Cars
    2003 BMW 530i
    What a mess! 10x better!


  5. #5
    Join Date
    Sep 2005
    Location
    Peoria, AZ
    Posts
    7,696
    My Cars
    03 zhp, 97 e36m3, 04 zhp
    Wow, I wouldn't touch that car with a 10ft stick after PO admitting to being such a careless jerk. Great cleaning potential and you used it full force - great job! Thanks for saving a great car!

  6. #6
    Join Date
    Mar 2011
    Location
    Jacksonville, FL
    Posts
    768
    My Cars
    2003 BMW 525iA
    Beautiful work mate, as said above, how'd you clean up that wood trim so nicely?

  7. #7
    Join Date
    Apr 2007
    Location
    Worldwide
    Posts
    1,051
    My Cars
    2004 X3 88 M3 83 323i
    Beautiful car! Can't believe PO didn't take care of it

  8. #8
    Join Date
    Mar 2012
    Location
    Kenosha, WI
    Posts
    9
    My Cars
    2008 Evo X
    Quote Originally Posted by apocalypsegoat View Post
    Beautiful work mate, as said above, how'd you clean up that wood trim so nicely?
    For the wood trim I used Meguiars All Purpose Cleaner, and I actually used some optimum spray wax on the surface as well as 303 Aerospace Protectant

    Thanks guys. The awesome part is that the guy who purchased the car got a really great deal on it due to the condition he bought it at, and he tried to flip the car for a quick buck at car max and a few local dealers. All of the offers were in the $3500-$4500 range due to the exterior condition. After I detailed the car, he posted it on craigslist and within a week sold it for $7500. The return on investment of paying for the detail paid off big time.
    Last edited by Will3ptman; 03-13-2012 at 11:02 PM. Reason: Automerged Doublepost

  9. #9
    Join Date
    Jul 2011
    Location
    Bay Area, California
    Posts
    591
    My Cars
    M3 w/Gt35r
    Looks awesome. What product did you use to remove the swirls?

  10. #10
    Join Date
    Mar 2012
    Location
    SF BA
    Posts
    17
    My Cars
    2008 E92
    It's like night and day. Awesome job!

  11. #11
    Join Date
    Jan 2004
    Location
    Mililani Mauka
    Posts
    1,207
    My Cars
    2016 M4
    This really looks great. Good job.

  12. #12
    Join Date
    Oct 2008
    Location
    Portland, OR
    Posts
    3,817
    My Cars
    '95 BMW 740IL
    Yes, Meg's 105/205 is a great polish & combo on BMW paint. Great job, happy to see the car has it's dignity back!! Let's hope the owner keep up on your great work! : )
    http://s434.photobucket.com/albums/qq67/mcallister95/
    production date: 01/95, DUDMD engine chip, Dinan transmission chip, Dinan CAI, Beyern Multis, Magnaflow cats, mufflers, 3" down turn tips. Bilstein shocks, struts, H & R stage II springs, strong strut brace, pornlights, wood ashtrays, leather/wood seatbacks, euro lighted headrests, 750 kidney grills, wood handles, wood maplight, b-pillars out of a 750, Ford Mustang injectors, "E's" AE and LED 3rd brake light special, cats delete, Magnaflow X-pipe, 199K miles


  13. #13
    Join Date
    Dec 2003
    Location
    Tulsa, OK
    Posts
    253
    My Cars
    '00 740i Sport
    What'd you use on the tail lights?

  14. #14
    Join Date
    Mar 2012
    Location
    Westchester, NY
    Posts
    4
    My Cars
    1997 BMW M3 Sedan
    The paint looks outstanding! Did you apply with a rotary machine, or a random orbit?

  15. #15
    Join Date
    Mar 2012
    Location
    Kenosha, WI
    Posts
    9
    My Cars
    2008 Evo X
    Quote Originally Posted by M for life View Post
    The paint looks outstanding! Did you apply with a rotary machine, or a random orbit?
    Thanks. I used a porter cable random

    Quote Originally Posted by slevy951 View Post
    What'd you use on the tail lights?
    I wet sanded them and then hit them with meguiars finishing polish
    Last edited by Will3ptman; 03-31-2012 at 12:16 PM. Reason: Automerged Doublepost

  16. #16
    Join Date
    Dec 2010
    Location
    Poway, CA
    Posts
    130
    My Cars
    05 ES330,04 GMC Yukon
    That poor car looked liked it was ready for the crusher. Great job on fixing that mess.

  17. #17
    Join Date
    Nov 2002
    Location
    So.California
    Posts
    19,642
    My Cars
    1995 M3
    Yep, very good job.
    I've had a few worse than that. One that sat for over 3 years and no cover.
    I had a driveway full of mud and leaves after washing. No joke.
    Walk a mile in my shoes and you are a mile away in someone else's shoes.
    Goodridge*UUC sways* Black TME's and mounts( switched from Red)* x-brace*brembo rotors*Zimmerman rear*Pagid*Riken Raptors* Roja Formula 7's (Bronze)* Stromung*Powdercoated AA DSB* OMP strut bar*GC RSM's* M3 alum/leather knob*JTD underpanel *Traffic PRO (sold) *Black hella Ellipsoids w/celis rings * ACS Pedals*ACS handbrake*RE Octane SSK*Wheelskins Eurotones S/ Wheel Cover( tossed-replaced with new one)* Totally Covers Front seat velour covers with custom styling *Rieger roof spoiler-lost it on fwy Stock A/B*URI CP (ditched years ago)*540 HFM (sold) Stock HFM (BeckArnley)*FMS 24 lb inj*Alum rad and some other stuff*Konis w/adj rr's*Vogtland springs ** Passport 8500(sold)*Passpprt 7500 (sold V1-1.8 with POP) No detectors at all.
    Coming...nada

    BMWCCA-303681

  18. #18
    Join Date
    Dec 2006
    Location
    OC, CA
    Posts
    9,205
    My Cars
    ML320-GTI-996TT-Bikes
    Wow, it's painful to see the neglect!! It has to be a nightmare trying to clean that up! Awesome job!!

    SOLD MAY '14
    Mods
    : 6psi Supercharger kit; Rogue RSM's; DINAN strut brace; Magnaflow exhaust; Stewart waterpump; Stoneguards, Glove box fix, M Shift knob; Aux input adapter;
    Mesh bumper grill; Projector Z II headlights (35W Xenon), IE alu radiator, ARD wheel studs, H&R coilovers, Work VS-XX wheels/Hankook V12 tires, VANOS fix

  19. #19
    Join Date
    Feb 2009
    Location
    USA
    Posts
    2,973
    My Cars
    2001 530i (E39) 128k

  20. #20
    Join Date
    Mar 2012
    Location
    Westchester, NY
    Posts
    4
    My Cars
    1997 BMW M3 Sedan
    [QUOTE=Will3ptman;24043036]Thanks. I used a porter cable random



    Thanks. I was looking into polishing my car, which has similar fine scratches. Will check out that Meguiars 105/205 for sure.

  21. #21
    Join Date
    Jan 2006
    Location
    Dayton, Ohio
    Posts
    988
    My Cars
    540/6 - S50E30
    What kind of clay did you use? I had no luck with a mothers clay bar at getting rust off my e30 wheels?

  22. #22
    Join Date
    Mar 2012
    Location
    Kenosha, WI
    Posts
    9
    My Cars
    2008 Evo X
    Quote Originally Posted by sachmo12345 View Post
    What kind of clay did you use? I had no luck with a mothers clay bar at getting rust off my e30 wheels?
    The rust on the drivers side front wheel (Worst) was probably a couple of millimeters thick. The previous owner drove the car down to where there was actually no brake pad left resulting in metal on metal every time he used the brakes. This is what resulted in the wheel becoming so heavily covered as well as the entire drivers side of the vehicle. This actually took a few different products and a whole lot of scrubbing. I started with the least aggressive approach which was sonax wheel cleaner. I had a feeling it would have little to no effect so I only tried it on a test spot. The sonax didn't remove any of the rust at all. So I tried out Meguairs all purpose cleaner and a microfiber towel. This had greater effect but still was taking forever and only worked on the lighter areas. So on the inside of the rim I actually tried a little CLR. And this was able to get a majority of the rust off. I then followed it up with some more all purpose cleaner. The rim was already damaged from one of the studs being broken off. It appeared that a wheel lock was on the tire, and because there was no key to remove it, someone decided it would be better to use a torch to heat the lock/stud and snap it off. This wasn't even noticed until I went to clean that wheel. Honestly, how many people buy a car and check to make sure every lug nut/stud is there. The buyer was a little shocked when I gave him the news. I wouldn't recommend using CLR as a go to cleaner as the stuff is a pretty aggressive product and could result in damaging your wheel, but in this case since the wheel was already damaged, there was little to lose and ended up working out with damaging the finish.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •