Can I order a second set or is it too late? This would be mpire's influence on me talking...the just in case one set gets destroyed syndrome.
BMW
1988 E30 M3: (STOLEN) Zinnabarot/Tan
1991 850Ci (SOLD): Euro spec, Black/Black, Wokke Chips, Remus Exhaust, ACS Body Kit, 3.91 LSD
1999 M Coupe (SOLD): (Euro S50B32), Estoril/Estoril/black, RE SSK, RK6A, RAID Steering wheel, R.Forbes sub-frame kit, ACS splitters/roof wing, Hi-perf. chip, Vibrant exhaust rear diffuser, ACS Type II Race wheels
2002 M Coupe: (US Spec, S54) JET Black/Black, UUC SSK, RK6A, RAID Steering wheel, SS Powerflo headers/Custom Exhaust, 3.73 LSD, R.Forbes sub-frame kit, ACS splitters/roof wing, rear diffuser, SSR GT3 18" wheels
2006 Mini Cooper S: Hyper Blue/white Top/blue-charcoal interior, Alta Supercharger pulley/cold air intake/light Crank pulley, Headers, OBX exhaust (Daily Driver)
If you do end up ordering 2, send 2 separate deposits, if it's not too much trouble; should help me keep track a little better
Wow, that's very strange...What did they look like after they exploded? I would think these pieces would deform or tear the bumper cover before breaking (But then again, if it gets very cold, i'm sure they'll be more brittle)
these are very close to the same weight as the ACS pieces (3 lb vs 2 lb)
There was another material we looked into, it was certainly "harder" but it looked like it would be more brittle, so we chose something that should have a bit of give to it; but with a 3000 lb car pushing them into a wall, i'm gonna say the wall will win that battle lol
Probably end of this week? I'll keep everybody updated, just wanna make sure i've got all my ducks in a row before i accept payment. Everyone's deposits are still being held in the PP account.
Yeah, second set no problem; just send another deposit, and make a note in the PP that this is your 2nd set
lol
Ok sounds good;
but I can not guarantee fitment of these on your snowmobile.
Both molds should be finished/adjustments made this week, and we'll start getting a few sets out next week.
It's possible quantities for this initial run might be limited, but I'll know more later
Last edited by 2000mkoop; 03-13-2012 at 06:17 PM.
Deposit sent!
1999 M Coupe Boston Green, Beige, H&R/Bilsteins, Underdrive Pulleys, Euro 6 speed, UUC SSK and Randy Forbes in the back
2002 2.5 Z3 roadster Oxford Green, auto, all stock
2013 Ram 3500 Crew Cab Dually 385 HP, 850 ft lbs torque at 1600 rpm, all stock and staying that way
2004 Mini Cooper Chili Red, daily driver, modified almost daily
You think these will look good if I paint them black? My car is already in for paint... Hmmmm... decisions...decisions
My Roady is lowered by 1.5in and it already got scraped a couple times in the splitter section.
Interested to know by how much will these "lower" the splitter portion of the bumper.
After seeing the picture I am interested. Just a few questions.
When is the last chance for deposits? You mentioned availability will come into question, I assume those first to pay will get first dibs, what is the estimate of the maximum time frame?
Sold: 1998 Cosmos Black 328i Sedan
Current: 2001 Laguna Seca Blue M Coupe, 2003 LeMans Blue M5
Daily: 2018 Shadow Black Raptor
Wife: 2013 Alpine White X5 35i
Contact Me: MDICTED@gmail.com
Instagram: MDICTED
Yep, everybody will get their parts in the order they put down a deposit (I think we're at 23 now)
I guess at this point there's not really much point in setting a deposit cutoff, but there's no point in waiting, as we're already at the $200 break. There is however risk of quantity limitations.
It's possible next week after we start making a few sets, we might be limited on how many we're making. Also, the mold has a "life", so at some point it will become unusable and a new mold made, so that will definitely slow things down, if he even has time to do this all over again.
If quantities become limited to less than the # of people committed, anyone who put down a deposit will just get a full refund obviously
Everything should be ironed out by next week though
Yup, got it! First few sets may ship next week; and at that point I'll have a better idea of the schedule for the restOriginally Posted by CMM3
I vant mein schplitters und I vant zem NOW!
Last edited by paul4223; 03-16-2012 at 06:39 PM. Reason: humor me, please
BMW
1988 E30 M3: (STOLEN) Zinnabarot/Tan
1991 850Ci (SOLD): Euro spec, Black/Black, Wokke Chips, Remus Exhaust, ACS Body Kit, 3.91 LSD
1999 M Coupe (SOLD): (Euro S50B32), Estoril/Estoril/black, RE SSK, RK6A, RAID Steering wheel, R.Forbes sub-frame kit, ACS splitters/roof wing, Hi-perf. chip, Vibrant exhaust rear diffuser, ACS Type II Race wheels
2002 M Coupe: (US Spec, S54) JET Black/Black, UUC SSK, RK6A, RAID Steering wheel, SS Powerflo headers/Custom Exhaust, 3.73 LSD, R.Forbes sub-frame kit, ACS splitters/roof wing, rear diffuser, SSR GT3 18" wheels
2006 Mini Cooper S: Hyper Blue/white Top/blue-charcoal interior, Alta Supercharger pulley/cold air intake/light Crank pulley, Headers, OBX exhaust (Daily Driver)
Thanks , got it: there will be additional cost for shipping, I'll send you a pp request once I have it calculated and the parts are ready to shipOriginally Posted by Racer MXM
Once I've got some ready to ship, I'll send pp requests to people for the remaining $$ (in order of deposits received, of course).
If the request isn't responded to within a few days, that person will just get bumped a spot down for shipping order
Wow those came out incredible. I'm regretting not purchasing a set.
996TTE39M5R55
Well hop on board! 200 dolla !Originally Posted by TPowerdinNY
BMW
1988 E30 M3: (STOLEN) Zinnabarot/Tan
1991 850Ci (SOLD): Euro spec, Black/Black, Wokke Chips, Remus Exhaust, ACS Body Kit, 3.91 LSD
1999 M Coupe (SOLD): (Euro S50B32), Estoril/Estoril/black, RE SSK, RK6A, RAID Steering wheel, R.Forbes sub-frame kit, ACS splitters/roof wing, Hi-perf. chip, Vibrant exhaust rear diffuser, ACS Type II Race wheels
2002 M Coupe: (US Spec, S54) JET Black/Black, UUC SSK, RK6A, RAID Steering wheel, SS Powerflo headers/Custom Exhaust, 3.73 LSD, R.Forbes sub-frame kit, ACS splitters/roof wing, rear diffuser, SSR GT3 18" wheels
2006 Mini Cooper S: Hyper Blue/white Top/blue-charcoal interior, Alta Supercharger pulley/cold air intake/light Crank pulley, Headers, OBX exhaust (Daily Driver)
please could you give me a price shipped to 34238?
i am in South Africa at the moment and need a price on the shipping so that i can make 1 payment. thanks
yes Fl :-) if i paid in full now, how soon could you post a set out of interest?
The people who have already paid a deposit will get their splitters in the order they paid , so you would be after them.Originally Posted by thebrittishguy
I'll have a better idea of how quickly I can make these next week, when the first sets will likely be shipping out
Just sent deposit paypal.
Barearrow
"Good words don't last long until they amount to something"
Haury's Sf reinforcement, H&R RSS, H&R bars, corner balance, IE Rear weld-on's, IE shock mts, IE rear bush, IE trans mnts, UUC DSSR, RE engine mnts, Strong struts, KMACII Plates, UUC FCAB, Dr Vanos II, AFE CAI, HO coils, BB TriFlows, Turner Shorty headers, M50 manifold, Soon to be AA Supercharged, Power Slots, ULT pads, PIAA, Conti DWS
Bookmarks