WTS: 1999 M3 Race Car (IP-ish/GTS3)

[vinnymac]

***SOLD***

I'm putting my race car up for sale. It was originally built for BMWCCA Club Racing IP but it has been running in NASA GTS3 for the past couple seasons. It is fully NASA GTS3 compliant, but would need a few minor changes to be BMWCCA IP compliant. I put a new motor in the car last season with a fresh rebuilt low mileage S52 (58k miles). The car was built with quality components and has been a joy to drive. The car has never been wrecked and it fast and competitive.

I am putting the car up for sale because my wife and I are expecting our first child this year and I have a new business opportunity on the horizon. These two things will not leave much time for racing and I don’t want the car to sit in my garage for years without being driven.

I also have an open deck 18’ Texas Rollback trailer with winch and wheel rack available as a package if someone is interested. I will not sell the trailer until after the car is sold.

Price is $35,500 for the car as it is configured today. This includes everything listed below. I will also consider street car trades (335i coupe or E46 M3). I'm also willing to work a little on price and configuration as I could remove some of the installed components and/or spares (data acquisition, spare wheels/tires, etc.)

Please contact me via email or PM if you have any questions. Thanks.

Vehicle Overview
1999 BMW E36 M3

Power plant (new engine July 2010)
OBD1 S52 3.2L inline-six cylinder
• Custom Active Autowerke OBD1 ECU tuning
• Sunbelt 280/272 Race Camshafts
• Sunbelt Race Valve Springs
• 24lb Bosch Fuel Injectors
• S50 Intake Manifold
• Bimmerworld Silicone 3.5” Intake Boot
• OEM Euro M3 3.5” HFM
• Bimmerworld World Challenge 3.5” Race Intake
• S54/Euro Oil Filter Housing
• S54/Euro Dual Sump Oil Pan + Oil Pump
• Mocal 235 Matrix 19-Row Oil Cooler
• Zionsville Autosport E36 Competition Radiator w/ SPAL Electric Fan
• VAC Motorsports MLS Headgasket (stock thickness)
• ARP Head Studs
• Bimmerworld Dual Fuel Pumps
• Kromer Kraft Custom 3.2L Race Headers
• Kromer Kraft Race Exhaust

Drive train
• 5-Speed ZF Transmission
• Vorshlag Transmission Mounts
• Metrix Motorsports Custom 3.64, 4-Clutch, 30/60 Variable Lock Limited Slip Differential
• Mocal Differential Pump and Cooler (custom setup with forced air cooling)
• AKG Motorsports Polyurethane Differential Bushings
• E36 Euro Floating Front Brake Rotors
• Custom Brake Cooling Ducts
• Hawk HT-10 Race pads
• Kosei K1 17” x 8.5” Wheels (12)
• 245/40/17 Hoosier R6 (Dry)
• 245/40/17 Hoosier Rains (Wet)

Suspension
• JRZ RS Double Adjustable Coilovers
o 700lb 6” x 2.25” Front Eibach Springs
o 800lb 5” x 2.25” Rear Eibach Springs
• Ground Control Race Camber/Caster Plates
• Ground Control Articulating Rear Weight Jacks
• Ground Control Race Rear Shock Mounts
• Ground Control Tubular-Adjustable Race Front Sway Bar
• Ground Control Adjustable Race Rear Sway Bar
• Ground Control Adjustable Lower Rear Control Arms
• Ground Control Front Control Arm Bearings
• Ground Control Rear Trailing Arm Bearings
• Mason Engineering Front Strut Tower Brace

Chassis & Body
• Turner Motorsports Front Subframe Mount reinforcements
• Turner Motorsports Rear Sway bar Bracket reinforcements
• Powerflex Race Rear Subframe Bushings
• BMW OEM X-Brace
• Brooks Motorsports Adjustable Carbon Race Wing
• Turner Motorsports Headlight Intake Duct
• Carbon Fiber Front Dive Planes
• TC Design Folding Tow Hooks

Interior & Instrumentation
• Custom 8-pt Roll Cage (www.izzycustomcages.com)
• Recaro SPG Pro Racer Driver Seat
• VAC Motorsports Seat Mount
• Schroth Profi II HANS Harness
• Momo Mod 80 Steering Wheel
• TC Racing Quick Release Steering Wheel Hub
• SPA Firefighter AFFF 4L Fire Suppression System
• Dual Master Cut-Off Switches
• Pyrotect Driver Window Net
• BSR Safety Solutions Interior Net
• Cool Shirt Driver Cooling System
• RacePak IQ3 GPS Data Acquisition Dash
• RacePak VNet IntelliGauges (Water Temp, Oil Temp, Oil PSI)
• IO Port Racing Camera Mount
• AMB TranX260 Transponder











These two pics are of the trailer (old rear wing configuration on the car)

[winefool]

Booo! Sorry to see this listing Vince. Great car, hope it finds a good (midwest) home...

[vinnymac]

Pics added.

[NASA144]

Drool bump

[RingoZabel]

Nice car GLWS.

[m3j0n]

good luck with sale. Bump for a great forum member.

[thehounder]

if I could sell my E46 m3, i'd pick this up. GLWS

[LukeP]

Great car! Will be sad to see it go.

[vinnymac]

Thanks for all the nice comments guys.

[elliott95]

Wow thats one hell of a well built car. GLWS.

[Former JStocker]

Vinnie- would you please PM me to discuss details? Love the car and it's exactly what I've been looking for (except the price maybe). TIA

[vinnymac]

Vinnie- would you please PM me to discuss details? Love the car and it's exactly what I've been looking for (except the price maybe). TIA

Doesn't look like you have PM's enabled. Just sent you an email. Thanks.

[alexd]

Damn Vinny, looks so nice. Bump for a good seller.

[bmw4035]

i am interested where can I call you?

[bmw4035]

i am interested how can I contact you?

[Steve J.]

Don't forget to add in it includes a Jaffster Shift Knob GLWS - uber clean and fast car.

[vinnymac]

i am interested how can I contact you?

You can PM directly on this site or email me at vinceko75 at gmail dot com

Thanks.