What did you do to your e36 today?

**Kraut.Burner** · 06-25-2009, 02:41 AM

took off my three bladed fan

..... tomorrow gonna swap in new v-belts

**numbah9** · 06-25-2009, 08:56 AM

Installed new front suspension last night, but heard a grinding/scratching noise from the LF wheel. It sounded like the brake rotor dust shield was rubbing on the rotor. Got up at 6am this morning, pulled the wheel off, bent the dust shield back a little and put it all back together. Success!

**carguy13** · 06-25-2009, 11:42 AM

lol...i glued my door handle back on

**Go3Go** · 06-25-2009, 01:01 PM

installed h&r race springs all around, along with new rear bilstien sports, and polyurethane shock mounts. I didn't have enough money for new struts so I'm just gonna get the bilstien sports next month and put em in then

**malubawla** · 06-25-2009, 01:06 PM

new belts, changed crank seal, valve cover gasket, water pump, coolant, power steering fluid, oil and spark plugs

**Dmyerzzz** · 06-25-2009, 02:35 PM

Changed the oil, spark plugs, and ignition coils.

**turdlecharge** · 06-25-2009, 02:42 PM

rewired front of car (kid who had it butchered the headlight wire loom)

fixed pass door handle
fixed drivers door handle
installed pass door panel
installed aluminum racing radiator
installed electric fan
wired electric fan
installed new hood lock mechinism
installed new wheel center cap roundels
installed rear roundel
ordered more parts

**LuvMy328is** · 06-25-2009, 02:55 PM

Fixed both doors. The interior panels were loose because the glue holding the mounting rails had dried up. I also lined the top of the pockets with felt to prevent them from rattling. I have also installed the ///M door moldings that have been in my basement since December

~Phil

**AshamedGorilla** · 06-25-2009, 06:13 PM

Yesterday I washed and waxed it and cleaned the interior. Took me 5 hours. It was the first wax since I've had the car (about a month.) Now I can see all the imperfections!

Today I bought new roundels because the old ones were all scratched and faded.

**jmo69** · 06-25-2009, 06:45 PM

Washed off the baked on bug guts from Sat night. Testerday I ordered a new projector lens and bid on a remote fob.

**curry** · 06-25-2009, 07:25 PM

Put in a new slipring for the SRS system. Actually it was an easy job, but Pelican Parts' profits went up. For the first time in two years my SRS light is off. Now I just hope it stays that way. It would be worth it.

**Mr Clean** · 06-25-2009, 07:45 PM

Replaced my damn window motor!!! A big thanks to the DIY forum!

oh and washed it hehehe

**swtyphoon** · 06-26-2009, 12:51 PM

Threw on a used AA exhaust, and tried to figure out why my lighter plug isn't working. Also received a Thera Band kit to use to fix my convertible roof.

**visible** · 06-26-2009, 11:32 PM

Replaced the forking headliner! Thank you Jay!

**TheWeener** · 06-27-2009, 12:56 AM

Put on new tires 225/45

**Meatball546** · 06-27-2009, 02:53 AM

^ Looks awesome, man!

**flyfishvt** · 06-27-2009, 06:34 AM

Replaced the carpet
repaced the seats with new leather
fixed non working windows and door locks
replaced rear lower control arm and bushing
recovered the headliner, A pillar and C pillar
Front brakes
Rear shocks

Ok not Yesterday Just in the last week.
Gotta love Bentley Manuals

**thedude60126** · 06-27-2009, 10:44 AM

Just hard wired my v1 and put in my m3 front sway bar I got

**EThirtySicks** · 06-27-2009, 10:55 AM

Originally Posted by swtyphoon

Threw on a used AA exhaust, and tried to figure out why my lighter plug isn't working. Also received a Thera Band kit to use to fix my convertible roof.

Did you check the fuse that controls it?

**jmo69** · 06-27-2009, 03:24 PM

Did a quick once over on my interior and lubed the sunroof tracks.

**WTFGERMAN** · 06-27-2009, 03:33 PM

Originally Posted by thedude60126

Just hard wired my v1 and put in my m3 front sway bar I got

why are you running a m3 front sway bar? Its much smaller than your stock one.

**thedude60126** · 06-27-2009, 04:14 PM

The stock one was rusted terribly to the point it looked like at one spot it was gonna crack (really weird cause the car itself does not have much rust at all) and I got the m3 sway for free with all new bushing. Hoping to get the uuc kit by next year.

**xinfinity** · 06-27-2009, 05:57 PM

i made sweet love to her with the road

**e36138vadered** · 06-27-2009, 06:05 PM

anyone wanna help me out lookin for blacked out e 36s

**WTFGERMAN** · 06-27-2009, 07:36 PM

Originally Posted by thedude60126

The stock one was rusted terribly to the point it looked like at one spot it was gonna crack (really weird cause the car itself does not have much rust at all) and I got the m3 sway for free with all new bushing. Hoping to get the uuc kit by next year.

do you have M shocks on your car?

Thread: What did you do to your e36 today?

Thread Tools

Bookmarks

Bookmarks

Posting Permissions