I have a spal fan wired up to a spal relay, and it was running fine for about a year up until recently. It has been blowing the 30 amp in line fuse I would replace it and after a few minutes of the fan cycling, it would blow again. I eventually tried replacing it with a 40 amp fuse and now the fan wont turn on at all when the black/green wire and brown are jumped at the temp switch while the fuse is still good and I hear the relay clicking. Any Ideas?
And putting bigger fuses is a good way to burn the car to the ground.
Attn. NEWBIES: Use the search feature, 98% has already been discussed.
Click the search button, select "search single content type", select the "e36 sub forum" specifically, try the "search titles" then try the "search entire posts".
Last edited by str8killer2k8; 07-30-2023 at 11:34 PM.
Bookmarks