|
View Full Version : Replacing rear strut mounts on '96 E38? clean36 04-28-2008, 07:35 PM Friend's '96 740iL(no EDC, no self-leveling) RSM's need to be replaced. Anyone do this before? Any documented procedures online? I couldn't find any.. even on e38.org Any info would be awesome :buttrock pinned 04-29-2008, 02:29 AM I used an ETK/TIS program from ebay (about 14 bucks). If I remember right you have to pull rear seat, speaker grill/rear deck, tires and inner fender. Not too bad of a job all in all. bugs1357 04-29-2008, 06:22 AM These might help: http://www.bimmerboard.com/forums/posts/283611 http://www.bimmerboard.com/forums/posts/37740/ clean36 04-29-2008, 05:36 PM I used an ETK/TIS program from ebay (about 14 bucks). If I remember right you have to pull rear seat, speaker grill/rear deck, tires and inner fender. Not too bad of a job all in all. These might help: http://www.bimmerboard.com/forums/posts/283611 http://www.bimmerboard.com/forums/posts/37740/ Doesn't sound too bad! Thanks for the info guys! :) |