Well maybe not trillions... but a whole heck of a lot!!!


As some of you guys know, the shop is getting filled up with parts. I have recently moved all the stuff out of our old location to the new one so we are overflowing with E36 Parts.

Looking to sell a lot of parts. In the interest of cleaning the shop up, let me know what your needs are! I will probably throw you some good numbers :)

I will probably not make a comprehensive list so just PM me some stuff you might need and I'll see what I can do.


Thanks!!!

hum my seats my rear panels :help:help Adam let me know when the headlights come in I called u that DAY

sorry Nilton, I got sick and I had to move all the stuff from the Bayside spot IMMEDIATELY. I'll PM you!

Any rack and pinions?

Just E36 parts?

Just E36 parts?

For the most part yes. This is from previous car part outs. If you were interested in new parts, we vendor for them aswell. PM me.

Any rack and pinions?

For which car?

any speakers? it'll be awesome if they are Harmon Kardons.

I may have some speakers available. I don't think any HK stuff though~

I have seen a thread about a e36 rack and pinion onto the e30s was a good modification ratio. Would you know anything about this? I might as well....

In need a whole mess of parts:

A pillar pass side front (is this called an a pillar)????

window motor pass side coupe

driver side sill strip

In need a whole mess of parts:

A pillar pass side front (is this called an a pillar)????

window motor pass side coupe

driver side sill strip



driver side sill strip... M3 or non M3?

A/C compressor and A/c compressor relay
aux fan

BMW M POWER VALVE COVER?
RADIATOR?
A/C COMPRESSOR?
FACTORY E36 "M" MUFFLER

Long shot, VADER SEATS?:buttrock

BMW M POWER VALVE COVER?
RADIATOR?
A/C COMPRESSOR?
FACTORY E36 "M" MUFFLER

Long shot, VADER SEATS?:buttrock

I have the valve cover, a/c compressor and M exhaust. I'll PM ya.

A/C compressor and A/c compressor relay
aux fan


Should have something, I will check and PM you.

any extra microfilters? too, lemme know in the pm.

cabin air filter you mean? I can them, let me know if you want 1

I have the valve cover, a/c compressor and M exhaust. I'll PM ya.




Should have something, I will check and PM you.

OK, thanks
What is the best route to your place from LI?

OK, thanks
What is the best route to your place from LI?

We are right off Exit 2 on the Jackie Rob

s50b32 and a 6 speed

1200 cash pick up tomorrow

kthxbai

hey adam!

have the angel eyes for my Depo HID/Angel Eyes package come in yet?

I need driver's side front amber corner, and passenger side rear amber tailight for E36 sedan. PM if you have any, thanks.

Do you have a passenger side fog light bracket for an e36 m3?

any ds2's, or 8.5 inch contours?

do you have an E36 front bumper? what colors do you have?

arctic silver m3 front possible rear bumper
passanger side window and door seal/trim peice -- dove gray, coupe
front/rear strut bars
m3 front sway bar endlinks

i think that it, at least all i can think of right now.

Jason

i need to pass by i need some interior parts..by any chance do you have the wire thing for my hood ?

-Alex

Window motor?

m3 power steering pump? Send me a PM please!

complete wiring harness for 96-97 m3 5 spd coupe ?

FAN BLADE AND CLUTCH ASSEMBLY 92 325

Hmm.. Staten Islander here. 94 318is coupe.

How about a shifter boot and brake boot in black leather?
Black cloth or leather front seats with working heaters?
Door panels for a coupe (laughs)?
Headliner for a coupe w/ sunroof, in black or grey?
Post-facelift coupe header panel & grills?
Driver side foglamp & bracketry?

Thanks!

i need to pass by i need some interior parts..by any chance do you have the wire thing for my hood ?

-Alex

Pass by... I will order it on Monday.

Window motor?

I believe I do have one. I will check tomorrow. It will come with the regulator I believe.

FAN BLADE AND CLUTCH ASSEMBLY 92 325


I might have a good fan clutch and fan. if not I can get them new for a decent price.

Hmm.. Staten Islander here. 94 318is coupe.

How about a shifter boot and brake boot in black leather?
Black cloth or leather front seats with working heaters?
Door panels for a coupe (laughs)?
Headliner for a coupe w/ sunroof, in black or grey?
Post-facelift coupe header panel & grills?
Driver side foglamp & bracketry?

Thanks!

I have new fogs with brackets for sale. $50 a set.
No seats
I have a shift boot/ebrake boot set. $35 bucks.
No door panels
I might have a headliner
no panels.




Anyone requesting a PM I will PM you.

complete wiring harness for 96-97 m3 5 spd coupe ?

i have a harness

m3 power steering pump? Send me a PM please!

I believe i do have a PS pump, $50 bucks.

I believe i do have a PS pump, $50 bucks.
Pic? Is it working?

no pics, of course its working lol

Do you still have that tit. hood? I keep forgetting to contact you about that. Also i need a window regulator, and if you have and struts/springs/control arms/bushing. I think thats it for now haha.

yep, PM me.

Any 8.5 inch contours around the shop your looking to get rid of?

Awesome. I'll take the boots and a set of fogs. If you have an armrest, my right arm would be so much happier.



I have new fogs with brackets for sale. $50 a set.
No seats
I have a shift boot/ebrake boot set. $35 bucks.
No door panels
I might have a headliner
no panels.

M3 muffler hangers?

Awesome. I'll take the boots and a set of fogs. If you have an armrest, my right arm would be so much happier.

cool, shoot me an e-mail grdstorm11@aol.com

e36 m3 front bumper? Let me know ! will pick up asap.

Any 8.5 inch contours around the shop your looking to get rid of?

Ignored ^^^:embarrasm...

e36 m3 front bumper? Let me know ! will pick up asap.

I will have a few in a couple days, shoot me a PM

Ignored ^^^:embarrasm...

Whats up Albanian friend :)

I don't have any 8.5 contours I can spare at the moment. How did the S/C come out?

I will have a few in a couple days, shoot me a PM



Whats up Albanian friend :)

I don't have any 8.5 contours I can spare at the moment. How did the S/C come out?

I should be done tomorrow. I had to do alot of running around getting missing bolts, and crap like that. Basically I need to hookup my intake to the thermo tube, and install my radiator. Then hope the belt doesnt come flying off when I start her up for the first time in 3 weeks:eek:.... Hows the red car coming along?

I should be done tomorrow. I had to do alot of running around getting missing bolts, and crap like that. Basically I need to hookup my intake to the thermo tube, and install my radiator. Then hope the belt doesnt come flying off when I start her up for the first time in 3 weeks:eek:.... Hows the red car coming along?

practically done. I think itll get a few more goodies, M bumpers/skirts/mouldings/repaint.

I think I'll throw a half cage/roll bar in the bitch... not too concerned with it right now though.

practically done. I think itll get a few more goodies, M bumpers/skirts/mouldings/repaint.

I think I'll throw a half cage/roll bar in the bitch... not too concerned with it right now though.

Nice. when your done you should drive that whore at a local auto-x. :D

Any 4 door trunks laying around?

Nice. when your done you should drive that whore at a local auto-x. :D

ill try to get out there, Weekends are usually full :(

ill try to get out there, Weekends are usually full :(

I gotta stop by once I'm done. Did Eddie find a replacement yet?

I gotta stop by once I'm done. Did Eddie find a replacement yet?

still trying to build one.

still trying to build one.

What exactly is he building?:devillook

i need an e36 sedan passenger side front door (preferably arctic silver if its available, to fit 1997 328i), a dove grey sedan arm rest, and a set of straight stock wheels (pretty much any style besides bottlecaps) for e36 328i sedan.

if you've got any of these please let me know :)

i need an e36 sedan passenger side front door (preferably arctic silver if its available, to fit 1997 328i), a dove grey sedan arm rest, and a set of straight stock wheels (pretty much any style besides bottlecaps) for e36 328i sedan.

if you've got any of these please let me know :)

actually... don't have anyhing on that list. :(

im looking for a used b&m race shifter--- have any?

im looking for a used b&m race shifter--- have any?

none

:alright:) my face all day ADAM CAR IS COMING ALONG THANKZ :evil2:evil2

tt

I still haven't been able to get to you yet. What days/times are you at the shop? I would have to stop by after work or on the weekend, when I am actually out west.

i need a pair of fog lights with bracket;for my e36 m3 its a 911 call.let me know i live around the area!

Have any 1.9 z3, or 95 M3 racks?

I will have fogs with brackets on monday.

:coolill be there after work,one more question,how much for the set

PM'ed

Still waiting for that "PM" that Adam promised....also have an E36 A/C Compressor?

Let me know on all the stuff I asked about...there cash in my pocket take it before I pay with coins:)

I need a black a pillar pass side two door, got any?

I need a black a pillar pass side two door, got any?

I might have one, I'll check. I know i have a set but id rather not break it up. I should have some singles.

I might have one, I'll check. I know i have a set but id rather not break it up. I should have some singles.

Let me know a price for the set if you don't have any singles laying around.

Do you have window switches and bezels by any chance?

got jesus? lol i need him

Any TI parts? I could use the rear crossmember that the trailing arms and the diff bolt to

Hey adam, you got any of those wheel well covers lying around for me? mines kind of um yea...

Hey adam, you got any of those wheel well covers lying around for me? mines kind of um yea...

I don't think I have any good ones. They are all chewed up. Let me know, I might be able to get some new ones for a decent price... maybe.

Any TI parts? I could use the rear crossmember that the trailing arms and the diff bolt to

no TI parts. Sorry.

got jesus? lol i need him

Yes you do. Desperately.:redspot

Do you have window switches and bezels by any chance?

yes I do. Which do you need and for what year and model?