View Full Version : FS: The Original Koni E36 M3 Coilover Kit + Goodies


sirius600
04-17-2008, 05:26 AM
SOLD!

My M3 had originally come with this kit when i had bought it in 2006. Shortly after then i installed a TC Kline setup with camber plates. Basically this is an older generation of the TCK S/A coilovers. The strut is exactly like the TCK S/A strut, in fact the part numbers are the same except for the last number is a 1 instead of a 3. The rear shocks are the standard Koni 'compress to adjust' units. I have the original receipt from 2004, showing that these have had about 30k miles on them. They served me well for the 6 months i had them on my car with absolutely no problems, the stiff setting is still stiff, the soft still soft. I wouldnt mind parting a few things out, but i would definitely need to sell the struts first if i am going to separate the shocks and struts. All together i have the following parts in the kit:

Koni shocks/struts - $600
Eibach 325lb 60mm springs - $100
Eibach 450lb 60mm springs - $100
TCK 400lb rear 'beehive' springs - $120
Ground Control rear height adjusters - $100
TCK rear height adjusters - $120
TMS 'repair shop' RSM's - $30
95 M3 strut mounts - $100

The GOLD Package

A full suspension package! The GOLD package consists of:

1.The Koni Coilover Kit
2.Two sets of Eibach 325/450 springs
3.Rear ride height adjusters
4.TMS rear shock mounts
5.M3 strut mounts

All for the low price of $900+shipping (you save $150). Thats about half the cost of the similar TC Kline S/A setup! You can run these with stock mounts, though i would recommend camber plates to get the proper camber and castor for this setup. Here are some pics of the parts that are cleaned up and assembled:

http://img216.imageshack.us/img216/2318/img1353br1.th.jpg (http://img216.imageshack.us/my.php?image=img1353br1.jpg)

http://img216.imageshack.us/img216/8135/img1352er5.th.jpg (http://img216.imageshack.us/my.php?image=img1352er5.jpg)

http://img216.imageshack.us/img216/3439/img1351gw2.th.jpg (http://img216.imageshack.us/my.php?image=img1351gw2.jpg)

http://img216.imageshack.us/img216/2329/img1354gb4.th.jpg (http://img216.imageshack.us/my.php?image=img1354gb4.jpg)

http://img257.imageshack.us/img257/7955/img1370kv8.th.jpg (http://img257.imageshack.us/my.php?image=img1370kv8.jpg)

http://img257.imageshack.us/img257/2014/img1373cb4.th.jpg (http://img257.imageshack.us/my.php?image=img1373cb4.jpg)

Items are located in Southern California. Local buyers are welcome, and i will offer FREE Bimmerfest delivery. Pics of other items not displayed are available by request. Thank you. ;)

sisomphonE
04-17-2008, 01:08 PM
what are the measurements of front and rear springs?

sirius600
04-17-2008, 03:41 PM
what are the measurements of front and rear springs?

The Eibach springs are 7"

raoke
04-17-2008, 04:49 PM
Ill take them with the 450/400 spring rates and the tck rear adjusters..

Just pm me your email address so I can paypal you 900$\

How far are you from the 626 area- Pasadena/Alhambra? I can have my bro pick them up asap.

Or if you prefer can you do 875 picked up and save 2$ instead of giving 27$ to paypal.. youre choice. I can ask my bro to get cash.

sirius600
04-17-2008, 07:03 PM
Ventura Co area. Also, any local pickups i would have to insist pay with cash/check.

Raoke, check your PM.

raoke
04-18-2008, 04:44 AM
PMs replied to.

sirius600
04-18-2008, 05:44 AM
sale pending

sirius600
04-19-2008, 04:23 AM
SOLD, thank you to all who inquired.