E36M34life
04-16-2008, 11:51 PM
Well today, the dreaded happened, my tranny slipped so I need to know of any good tranny shops that can change the fluid in my AUTO tranny. I am planning for a 5 speed swap, but thats not for another half year so I need this tranny to last as it is my only car.
Anyone?
abbot555
04-17-2008, 12:17 AM
Well today, the dreaded happened, my tranny slipped so I need to know of any good tranny shops that can change the fluid in my AUTO tranny. I am planning for a 5 speed swap, but thats not for another half year so I need this tranny to last as it is my only car.
Anyone?
Call Peters Imports they should be able to do it. 2130 E Evergreen Blvd Vancouver WA
(360) 695-9008
m.olennick
04-17-2008, 12:40 AM
Call Peters Imports they should be able to do it. 2130 E Evergreen Blvd Vancouver WA
(360) 695-9008
Peter's is a good place. Additionally, Bartosh is an excellent parts store.
E36M34life
04-17-2008, 12:50 AM
Ok, thank you very much!!! I will call Peters first since they are closest.
Thank you!!
abbot555
04-17-2008, 12:56 AM
Peter's is a good place. Additionally, Bartosh is an excellent parts store.
Yeah good to know a parts store so you dont have to drive all the way to the stealer or if you need something quick. :D
keaudio
04-17-2008, 01:34 AM
tri county off 82nd and sunnyside and halsey imports on 77th and halsey northside mainly vw but should ask if bmw is an option?
rad750
04-17-2008, 09:35 AM
Bartosh has a shop associated with them. I have never had them do any work on my car, but they are very knowledgeable about Audi's and BMW's.
A&P Specialties is supposed to be good.
s_ribs
04-17-2008, 12:14 PM
We use Larry Morton's Transmission Service all the time and he's great.
503.657.5335
In Oregon City so possible too far away.
E36M34life
04-17-2008, 12:36 PM
We use Larry Morton's Transmission Service all the time and he's great.
503.657.5335
In Oregon City so possible too far away.
Thank you for the info, but unfortunately it is a little bit too far away, but I will still write the number down, who knows. Thanks!
E36M34life
04-17-2008, 12:44 PM
Damnit, I just called Peters and he quoted me $180 plus tax and fluid, thats just to change the damn fluid no flush or anything.
I looked on the DIY and im more then capable to do it, but I wont be able to get a flat surface and thats absolutely necessary to do it right, thats why I wanted to get a shop to do it, but it shouldn't cost that much.
Does anyone in the Vancouver/Portland area have a lift I can use, I'd pay for it. :)