View Full Version : FS Locally: Corbeau FX1 Pro Fixed Back Racing Seat $200 Firm


93Coupe325is
04-16-2008, 01:19 PM
SOLD !





This is my former passenger side seat, it is black on black, barely used condition with very minor scratchs on the back. Comes with side mounts that will direct bolt in to the passenger side of an E36. Drivers side and all other vehicles your on your own. Buy mine save yourself about $100 over new.
I am 6-5, 215 (36 waist) fits me fine.

Buy my seat and my 2007 Autopower Cam lock 5 point harness both for $300 firm.

The Corbeau FX1 Pro is the little brother to the FX1 seat. What makes this seat special is its extreme comfort and ability to fit in almost any vehicle. Based on feedback from customers, Corbeau adjusted the width of the seat to make it narrower, added some additional padding, and made this seat one of the most comfortable fixed back fiberglass seats on the market today. The FX1 Pro will fit drivers up to a 36" waist. It comes with both side and bottom mounting points and is all Black cloth w/Black cushion inserts.

Standard features:
• Fiberglass shell with black gel coat
• Removable cushion inserts
• Full body support
• 5-point harness capability
• Leatherette high wear patches
• Side and bottom mount
• 16 lbs.

E36M34life
04-16-2008, 09:00 PM
If only it would be for the driver side. :( Thats a damn good price too

93Coupe325is
04-17-2008, 11:46 AM
If only it would be for the driver side. :( Thats a damn good price too

dude its not that hard, I made my own.
Or just buy side mounts and VAC floor mount plates total bolt in.:rolleyes

E36M34life
04-17-2008, 11:59 AM
dude its not that hard, I made my own.
Or just buy side mounts and VAC floor mount plates total bolt in.:rolleyes

Its just not worth the trouble for me when I have to start fabricating stuff, otherwise I'd be all over it.

Do you want to trade for the rims I have for sale, the thread is just a couple down from this one.

93Coupe325is
04-17-2008, 12:16 PM
Its just not worth the trouble for me when I have to start fabricating stuff, otherwise I'd be all over it.

Do you want to trade for the rims I have for sale, the thread is just a couple down from this one.

:rolleyes
Come on, dont be a girl....:stickoutt



I kidd sorta:shifty
You save money by learning to do it yourself.:buttrock

Thanks for the offer for rims, but 18" race tires are too expensive.
And all my race tires are 17", and with 18's cant go wide enough and maintain the proper ride heights for my GC set up.
Good luck with your sale :)

E36M34life
04-17-2008, 12:34 PM
I understand man, no worries.

Let me think about ok, maybe I will buy them but I need to think about it first.

93Coupe325is
04-17-2008, 12:54 PM
I understand man, no worries.

Let me think about ok, maybe I will buy them but I need to think about it first.

hey mang, just to clairify:

I have only one seat, it was the passenger side seat, but only the brackets make it so.
It comes with FREE passenger side brackets, on your own for the rest.
It is a FIXED back seat, so be sure what your getting into.
Not that comfortable for long drives, thinner padding and no recline.
That said, I drove my car to race in Reno, and to Laguna Seca with my brother and we had no issues. My brother still thinks it is the most comfortable seat he has sat in.

So, if you just want to look cool its not the right seat. Just sayin:D

Oh, and Flood has first dibs as he checked it yesterday and will test fit tonight :devillook

I would not even sell this but racing budget is not were it should be.:(

I HAVE to make my first rookie fender to fender race because racing is life, everything else is just waiting around.:redspot

E36M34life
04-17-2008, 01:05 PM
Thanks for clarifying that, I already knew almost all of that, but thanks anyways, Lol.

93Coupe325is
04-17-2008, 02:13 PM
Thanks for clarifying that, I already knew almost all of that, but thanks anyways, Lol.

No worries, sometimes hard to tell via postings were a person is at.
Peace