Redoing my system tonight and I thought I had a manual on PDF, but of course I can't find it now.

Amps in question are A300 and Ax400. Need the crossover config and bridging info, but would really like to have the manual for future reference. I can't find the darn thing anywhere online.

Thanks!

the only manuals I am aware of are at
http://www.phy6.net/audio/index.htm

a300 is there... with bridging info :) Nice choice, I have that one too...

ax400 is not, and I don't recall offhand which xover model number was in that one
---456 maybe?
If you search for it perhaps you cna find out which xover was in it,and they MIGHT have the manual for the standalone xover.

You gonna watercool em?

the only manuals I am aware of are at
http://www.phy6.net/audio/index.htm

a300 is there... with bridging info :) Nice choice, I have that one too...

ax400 is not, and I don't recall offhand which xover model number was in that one
---456 maybe?
If you search for it perhaps you cna find out which xover was in it,and they MIGHT have the manual for the standalone xover.

You gonna watercool em?

Cool, thanks!

Yea, I'm not sure. I thought it was a built-in crossover with no relation to the other models, but I could be wrong. I haven't flipped it over in several years. From what I recall it's a bunch of dip switches and depending on the configuration you get different xover points.

.No water cooling. I did see your thread on it though in my search for the manuals.

I'm basically pulling some stuff from my 325ic since it's getting parted and putting some stuff in my 535i and storing the rest.

it has been more than a decade, but I remember one of the few ppi arts with an xover had in essence a normal xover and amp in the same chassis.
might not have been the ax400... edit: it was the ax606.2 i was thinking of.

hope this thread helps you!!!
http://www.caraudio.com/forum/showthread.php?p=2173238

it has been more than a decade, but I remember one of the few ppi arts with an xover had in essence a normal xover and amp in the same chassis.
might not have been the ax400... edit: it was the ax606.2 i was thinking of.

hope this thread helps you!!!
http://www.caraudio.com/forum/showthread.php?p=2173238

Yea, except the dork took a picture of the config with a camera so it's very hard to read...lol.

I have the Ax400 feeding the front separates now and the low pass output going to the A300 running in mono. I'm just not sure what the xover is set to. Sounds like too many lows are coming thru the fronts and/or they're set to full range. Doesn't sound like it should.

I gotta see if I can blow that pict up...

Thanks!

Found it!!!!!!!!!

http://www.directeddealers.com/manuals/og/precision_power/Precision_Power_Ax400_Owners_Manual.pdf

thanks! I downloaded it to my ppi art pdf collection.