cmwerks
04-03-2008, 01:50 PM
hey guys, i have alot of e30 cars and parts i want to sell, i am running out of room at my shop and some stuff has to go asap. I have a pretty big list and i am selling this as 1 big package for cheap, not selling individual parts. first off i have been buying up e30 cars and parts for some time now to put together i cool e30. I have what i need and am selling the rest, to make room.
Package includes:
1 Grey 1987 325i sedan with the m25 6cyl and 5 spd tranny. Engine has 165,000 miles and runs very well. Body is in decent shape and has some rust. Interior is in ok shape dash has no cracks. I used the brakes off this car so it has none and has a seized front wheel bearing . I have title and can sart and run the car for you, but it will need to be trailered. Car also has cosmo coilover kit(ebay).
1 maroon 1989 325e coupe with 6cyl m27eta engine and auto trans. 160,000 miles, engine runs good trans shifts good. Body has very little rust 1 dent on rear quarter panel. Interior is pretty good, missing door panel and other small interior parts, i have the title and can start the car for you but the brakes are shot, and its scary to drive.
I have a rebuilt m10 engine from my 1984 318i. this engine came from a 1984 318i that i bought of an old lady, runs good, but i wont be using it so it must go. Engine had 120,000 miles before being reapaired and about 10,000 since repair, i have paper work on what was done to the engine, see pic. also includes 5 speed trans, clutch(Almost new), flywheel, engine harness, ecu.The block and head have been painted with high temp primer base and clear. valve cover, intake manifold, timing chain cover, upper and lower oil pan, and misc brackets have been powder coated in mirror red and silver vein. Looks great. I am using the 318 i shell for my project car because it was form california and has no rust, but i have many parts from it, i will list ans many as i can think off, full body harness, full tan and blue interior, powder coated front calipers and brake dust shields, powder coated rear drums, front and rear bumpers, 8 extra bottle cap wheels with tires. I have many misc parts, i will pull out the all the parts i have, buyer can take what he wants and rest will go in dumpster.
All these parts can be pieced together to make 1 good car or everything can be parted out to make more money. I can trailer the cars and parts locally for small extra fee. My shop is in burr Ridge ill. i-55 and county line rd. Serious buys can call me at 1-708-369-9656 first $1500 takes it all.
325i
http://photos.e46fanatics.com/data/500/medium/325i.JPG
http://photos.e46fanatics.com/data/500/medium/3251_int_.JPG
325e
http://photos.e46fanatics.com/data/500/medium/325e.JPG
http://photos.e46fanatics.com/data/500/medium/325e_int_.JPG
m10 engine
http://photos.e46fanatics.com/showphoto.php?photo=79378&cat=500&ppuser=291
http://photos.e46fanatics.com/data/500/medium/m10_2.JPG
http://photos.e46fanatics.com/data/500/medium/m10.JPG
http://photos.e46fanatics.com/data/500/medium/m10_3.JPG
http://photos.e46fanatics.com/data/500/medium/m10_4.JPG
http://photos.e46fanatics.com/data/500/P1010587.JPG
http://photos.e46fanatics.com/data/500/medium/318brakes.JPG
Package includes:
1 Grey 1987 325i sedan with the m25 6cyl and 5 spd tranny. Engine has 165,000 miles and runs very well. Body is in decent shape and has some rust. Interior is in ok shape dash has no cracks. I used the brakes off this car so it has none and has a seized front wheel bearing . I have title and can sart and run the car for you, but it will need to be trailered. Car also has cosmo coilover kit(ebay).
1 maroon 1989 325e coupe with 6cyl m27eta engine and auto trans. 160,000 miles, engine runs good trans shifts good. Body has very little rust 1 dent on rear quarter panel. Interior is pretty good, missing door panel and other small interior parts, i have the title and can start the car for you but the brakes are shot, and its scary to drive.
I have a rebuilt m10 engine from my 1984 318i. this engine came from a 1984 318i that i bought of an old lady, runs good, but i wont be using it so it must go. Engine had 120,000 miles before being reapaired and about 10,000 since repair, i have paper work on what was done to the engine, see pic. also includes 5 speed trans, clutch(Almost new), flywheel, engine harness, ecu.The block and head have been painted with high temp primer base and clear. valve cover, intake manifold, timing chain cover, upper and lower oil pan, and misc brackets have been powder coated in mirror red and silver vein. Looks great. I am using the 318 i shell for my project car because it was form california and has no rust, but i have many parts from it, i will list ans many as i can think off, full body harness, full tan and blue interior, powder coated front calipers and brake dust shields, powder coated rear drums, front and rear bumpers, 8 extra bottle cap wheels with tires. I have many misc parts, i will pull out the all the parts i have, buyer can take what he wants and rest will go in dumpster.
All these parts can be pieced together to make 1 good car or everything can be parted out to make more money. I can trailer the cars and parts locally for small extra fee. My shop is in burr Ridge ill. i-55 and county line rd. Serious buys can call me at 1-708-369-9656 first $1500 takes it all.
325i
http://photos.e46fanatics.com/data/500/medium/325i.JPG
http://photos.e46fanatics.com/data/500/medium/3251_int_.JPG
325e
http://photos.e46fanatics.com/data/500/medium/325e.JPG
http://photos.e46fanatics.com/data/500/medium/325e_int_.JPG
m10 engine
http://photos.e46fanatics.com/showphoto.php?photo=79378&cat=500&ppuser=291
http://photos.e46fanatics.com/data/500/medium/m10_2.JPG
http://photos.e46fanatics.com/data/500/medium/m10.JPG
http://photos.e46fanatics.com/data/500/medium/m10_3.JPG
http://photos.e46fanatics.com/data/500/medium/m10_4.JPG
http://photos.e46fanatics.com/data/500/P1010587.JPG
http://photos.e46fanatics.com/data/500/medium/318brakes.JPG