Since I’ve been on this board, I always remember seeing a lot of interest in doing the M50/S50 manifold upgrade for our S52 / M52 motors. I want one too and after doing the research I want to get one from Eric who is better known here as E36M3E. I want to get a list of 10 people together that would be interested in getting his kit. I think that if we can get a list together, Eric should give us a discount. Please add your name to the list and post what you are looking to get.

1. wojtek79 – full install kit, no manifold

I'm interested but would like to know prices before commiting. Is it better to source the manifold separately?

I would like to know the discount, but I think we need more people before the numbers can be talked about.
1. wojtek79 – full install kit, no manifold
2. Kivey - Full install kit, no manifold

I'd be interested as well. I would like to know what the pricing would be for the kit alone, and the kit + manifold.
Found details of his kit here (http://forums.bimmerforums.com/forum/showthread.php?t=544605)

Thanks for setting this up. I hope it works out.

1. wojtek79 – full install kit, no manifold
2. Kivey - Full install kit, no manifold
3. Z3Couper – Full install kit, + manifold

:lol

You guys want it even cheaper than he's offering!? LOL! His kit is even better than the first gen that he created and it was more expensive then. I know. I paid up. The demand is still high and he's been able to keep up with the high demand as is, which I consider to be pretty damn impressive.

You guys would be lucky if he dropped it 5 bucks.

Not calling you guys fools or anything, but you would be hardpressed to get him to get motivated enough to do anything below his already minimal profit margin.

GOOD LUCK however!

:lol

You guys want it even cheaper than he's offering!? LOL! His kit is even better than the first gen that he created and it was more expensive then. I know. I paid up. The demand is still high and he's been able to keep up with the high demand as is, which I consider to be pretty damn impressive.

You guys would be lucky if he dropped it 5 bucks.

Not calling you guys fools or anything, but you would be hardpressed to get him to get motivated enough to do anything below his already minimal profit margin.

GOOD LUCK however!

He makes a point. His kit is amazing. Best on the market.

It's a hell of a price for the intake manifold kit, I bought one from him and service was great, he helped out a lot over the phone too. His prices are low as-is, if you want a kit for cheaper, go source each piece yourself.

^word

i bought 1w/o manifold and i have to admit his kit beats all elses and very very affordable. If u want it cheaper than just make the kit urself. :)

Guys. while I appreciate everyone's responses, keep in mind that this is a potential GB in the works. I am looking for people who are interested and not those who post here to tell me that I don't have a shot organizing this GB. I believe that if get a good list of people together we can get some kind of a discount. I am not looking for a 30% or a 40% discount because I know that is impossible to pull off. I'll be happy if we get 10%. Mass production always lowers the cost from my experience. So let's continue the list:

1. wojtek79 – full install kit, no manifold
2. Kivey - Full install kit, no manifold
3. Z3Couper – Full install kit, + manifold

This is a group buy in the works? Have you even talked to Eric yet? Realize that he's not a large company like TMS or UUC, he's putting these together himself. You already have a link to the group buy in your sig too, nice.

Where can I find more information on "Eric's" kit?

Where can I find more information on "Eric's" kit?
http://www.m50manifold.com/

i put an order in with eric direct... my review soon.

If Eric is interested in giving some kind of discount, I might like to join. Depends on price as he will get my money sooner or later anyway.

1. wojtek79 – full install kit, no manifold
2. Kivey - Full install kit, no manifold
3. Z3Couper – Full install kit, + manifold
4 erbillingsley - M50 Manifold Conversion Kit #3 w/ M50 Fuel Rail Cover

1. wojtek79 – full install kit, no manifold
2. Kivey - Full install kit, no manifold
3. Z3Couper – Full install kit, + manifold
4. erbillingsley - M50 Manifold Conversion Kit #3 w/ M50 Cover
5. Rated///m - full install, no manifold

full install kit plus manifold put me down in 2 weeks lol......i get my paycheck

Full install kit + manifold as well.

i am in for a kit w/o manifold..i asked him about a discount as well and got no responce. i was asking for him to come down to the the ko price of 170. and got no responce. but either way i will prob order one from him. i figured it couldnt hurt to ask.

Here is what we potentially have so far:

1. wojtek79 – full install kit, no manifold
2. Kivey - Full install kit, no manifold
3. Z3Couper – Full install kit, + manifold
4. erbillingsley - M50 Manifold Conversion Kit #3 w/ M50 Cover
5. Rated///m - full install, no manifold
6. foundingfathers - full install kit plus manifold put me down in 2 weeks lol......i get my paycheck
7. thbmwm3 - Full install kit + manifold as well.
8. whitecord - I am in for a kit w/o manifold..

I am going to contact Eric with this list and let's go from there.

1. wojtek79 – full install kit, no manifold
2. Kivey - Full install kit, no manifold
3. Z3Couper – Full install kit, + manifold
4. erbillingsley - M50 Manifold Conversion Kit #3 w/ M50 Cover
5. Rated///m - full install, no manifold
6. foundingfathers - full install kit plus manifold put me down in 2 weeks lol......i get my paycheck
7. thbmwm3 - Full install kit + manifold as well.
8. whitecord - I am in for a kit w/o manifold..9. sunzout - full install Kit, no Manifold
9. sunzout – full install kit, no manifold

1. wojtek79 – full install kit, no manifold
2. Kivey - Full install kit, no manifold
3. Z3Couper – Full install kit, + manifold
4. erbillingsley - M50 Manifold Conversion Kit #3 w/ M50 Cover
5. Rated///m - full install, no manifold
6. foundingfathers - full install kit plus manifold put me down in 2 weeks lol......i get my paycheck
7. thbmwm3 - Full install kit + manifold as well.
8. whitecord - I am in for a kit w/o manifold..
9. sunzout – full install kit, no manifold
10.contranication- full install, no manifold, w/ fuel cover

1. wojtek79 – full install kit, no manifold
2. Kivey - Full install kit, no manifold
3. Z3Couper – Full install kit, + manifold
4. erbillingsley - M50 Manifold Conversion Kit #3 w/ M50 Cover
5. Rated///m - full install, no manifold
6. foundingfathers - full install kit plus manifold put me down in 2 weeks lol......i get my paycheck
7. thbmwm3 - Full install kit + manifold as well.
8. whitecord - I am in for a kit w/o manifold..
9. sunzout – full install kit, no manifold
10.contranication- full install, no manifold, w/ fuel cover
11.notherm3- full install kit, w/ & w/o manifold

1. wojtek79 – full install kit, no manifold
2. Kivey - Full install kit, no manifold
3. Z3Couper – Full install kit, + manifold
4. erbillingsley - M50 Manifold Conversion Kit #3 w/ M50 Cover
5. Rated///m - full install, no manifold
6. foundingfathers - full install kit plus manifold put me down in 2 weeks lol......i get my paycheck
7. thbmwm3 - Full install kit + manifold as well.
8. whitecord - I am in for a kit w/o manifold..
9. sunzout – full install kit, no manifold
10.contranication- full install, no manifold, w/ fuel cover
11.notherm3- full install kit, w/ & w/o manifold
12.BoltonM3- Full kit, +manifold, +Fuel Rail cover

Discounted price would be nice to know as well.

1. wojtek79 – full install kit, no manifold
2. Kivey - Full install kit, no manifold
3. Z3Couper – Full install kit, + manifold
4. erbillingsley - M50 Manifold Conversion Kit #3 w/ M50 Cover
5. Rated///m - full install, no manifold
6. foundingfathers - full install kit plus manifold put me down in 2 weeks lol......i get my paycheck
7. thbmwm3 - Full install kit + manifold as well.
8. whitecord - I am in for a kit w/o manifold..
9. sunzout – full install kit, no manifold
10.contranication- full install, no manifold, w/ fuel cover
11.notherm3- full install kit, w/ & w/o manifold
12.BoltonM3- Full kit, +manifold, +Fuel Rail cover
13.pro325- Full kit, +manifold, +Fuel Rail cover

Sure would be nice to know the discount of the GB...

1. wojtek79 – full install kit, no manifold
2. Kivey - Full install kit, no manifold
3. Z3Couper – Full install kit, + manifold
4. erbillingsley - M50 Manifold Conversion Kit #3 w/ M50 Cover
5. Rated///m - full install, no manifold
6. foundingfathers - full install kit plus manifold put me down in 2 weeks lol......i get my paycheck
7. thbmwm3 - Full install kit + manifold as well.
8. whitecord - I am in for a kit w/o manifold..
9. sunzout – full install kit, no manifold
10.contranication- full install, no manifold, w/ fuel cover
11.notherm3- full install kit, w/ & w/o manifold
12.BoltonM3- Full kit, +manifold, +Fuel Rail cover
13.pro325- Full kit, +manifold, +Fuel Rail cover
14.vietxfire1 full install kit w/o manifold

This is a group buy in the works? Have you even talked to Eric yet? Realize that he's not a large company like TMS or UUC, he's putting these together himself. You already have a link to the group buy in your sig too, nice.

+1 -- :nono

It's not like Eric is banking on these -- it's a nicer kit than KO's and it's frickin' cheap for what it is... c'mon guys, just suck it up and deal with Eric directly...

+1 -- :nono

It's not like Eric is banking on these -- it's a nicer kit than KO's and it's frickin' cheap for what it is... c'mon guys, just suck it up and deal with Eric directly...I think the OP is looking for people to join the possible g.b., not criticism. I see your point, but as for margins, only the seller knows those. So let's just leave it up to Eric to decide whether or not he will provide a discount.

i got my kit in the mail. I will post some pics of the unboxing.

I know you guys know what whats inside but hey why not.

Ok guys.... the list is complete... I am waiting for a response from Eric now..

1. wojtek79 – full install kit, no manifold
2. Kivey - Full install kit, no manifold
3. Z3Couper – Full install kit, + manifold
4. erbillingsley - M50 Manifold Conversion Kit #3 w/ M50 Cover
5. Rated///m - full install, no manifold
6. foundingfathers - full install kit plus manifold put me down in 2 weeks lol......i get my paycheck
7. thbmwm3 - Full install kit + manifold as well.
8. whitecord - I am in for a kit w/o manifold..
9. sunzout – full install kit, no manifold
10.contranication- full install, no manifold, w/ fuel cover
11.notherm3- full install kit, w/ & w/o manifold
12.BoltonM3- Full kit, +manifold, +Fuel Rail cover
13.pro325- Full kit, +manifold, +Fuel Rail cover
14.vietxfire1 full install kit w/o manifold
15.OO7Zummie - full install kit, manifold and fuel rail cover

Hi guys,


just got to my PMs about this. I get PMs and emails about sales prices and lowered GB deals all the time and have always declined them because there isn't much built into the price as it is. I've actually been thinking of raising the price a tiny bit too lately. and, it doesn't save me much time (mass production) because that's the way I sell them anyway...take orders for a week or so and then build and ship all of them on 1 day of the following week.

I'm in a bit of tough place on this one though because you guys have your list all complete and tidy already. so not to be an a-hole, but how does free shipping on 10 kits sound? that's a $25/$20 savings on kit #3/#2...or almost 10% off.

keep in mind that this is my busy season and I sell a ton of these things. there's no real reason to have a sale except that you guys have all asked so nicely and I hate being a dick.

I hope this is acceptable...first 10 kits only.

Eric

Hi guys,


just got to my PMs about this. I get PMs and emails about sales prices and lowered GB deals all the time and have always declined them because there isn't much built into the price as it is. I've actually been thinking of raising the price a tiny bit too lately. and, it doesn't save me much time (mass production) because that's the way I sell them anyway...take orders for a week or so and then build and ship all of them on 1 day of the following week.

I'm in a bit of tough place on this one though because you guys have your list all complete and tidy already. so not to be an a-hole, but how does free shipping on 10 kits sound? that's a $25/$20 savings on kit #3/#2...or almost 10% off.

keep in mind that this is my busy season and I sell a ton of these things. there's no real reason to have a sale except that you guys have all asked so nicely and I hate being a dick.

I hope this is acceptable...first 10 kits only.

Eric

You are wayyyy nice :)

How do you want us to place an order? Is there a special code you want us to use in the mesage box when we place an order? Or should we just mention this GB.

How do you want us to place an order? Is there a special code you want us to use in the mesage box when we place an order? Or should we just mention this GB.

Put a note in the paypal and I'll check the names on the thread too so put your BF name in the note as well.

If you're undecided on whether to get the full kit or kit w/o manifold...no worries as long as your 1 of the first ten on the list order whatever you want.

Full kit is $375 shipped and without manifold is $195. New fuel rail covers are $40 additional to either price.

It may take me a couple weeks to get all these out and I will ship based on payment dates.

Paypal is sales@m50manifold.com.

Thanks,

Eric

i would jump on this...but im local so i can drop by and pick it up lol


other guys should jump on this eric does all the work so you should be happy that hes giving free shipping on the kits

hey, can i get free shipping on just a fuel rail cover? ;)
as you know i just got my m50 manifold kit a few weeks ago

Hi guys,


just got to my PMs about this. I get PMs and emails about sales prices and lowered GB deals all the time and have always declined them because there isn't much built into the price as it is. I've actually been thinking of raising the price a tiny bit too lately. and, it doesn't save me much time (mass production) because that's the way I sell them anyway...take orders for a week or so and then build and ship all of them on 1 day of the following week.

I'm in a bit of tough place on this one though because you guys have your list all complete and tidy already. so not to be an a-hole, but how does free shipping on 10 kits sound? that's a $25/$20 savings on kit #3/#2...or almost 10% off.

keep in mind that this is my busy season and I sell a ton of these things. there's no real reason to have a sale except that you guys have all asked so nicely and I hate being a dick.

I hope this is acceptable...first 10 kits only.

EricThat's cool man. Thanks for such a generous offer! I think I'll pass though, for now. I saw a dyno comparison from stock to m50, and it looked like there is an equal drop in hp and torque in the low range as there is a gain in the upper range. Since I have no plans to track or race my car, I think it would be less than optimal to do. I guess I am just undecided for now....so those who know that they want this would better benefit from the discount, since there are only 10 spots.

Thanks again, especially for the direct response to all of us. Thanks to wojtek for putting this together too!

Paypal sent! :)

payment sent....thanks a ton

payment sent. Thanks Eric for the deal.

That's cool man. Thanks for such a generous offer! I think I'll pass though, for now. I saw a dyno comparison from stock to m50, and it looked like there is an equal drop in hp and torque in the low range as there is a gain in the upper range. Since I have no plans to track or race my car, I think it would be less than optimal to do. I guess I am just undecided for now....so those who know that they want this would better benefit from the discount, since there are only 10 spots.

Thanks again, especially for the direct response to all of us. Thanks to wojtek for putting this together too!

you can always get the shark injector and you will gain some of that lost low end HP and torque...thats what im planning on doing

That's cool man. Thanks for such a generous offer! I think I'll pass though, for now. I saw a dyno comparison from stock to m50, and it looked like there is an equal drop in hp and torque in the low range as there is a gain in the upper range. Since I have no plans to track or race my car, I think it would be less than optimal to do. I guess I am just undecided for now....so those who know that they want this would better benefit from the discount, since there are only 10 spots.

Thanks again, especially for the direct response to all of us. Thanks to wojtek for putting this together too!

peak torque is nealry equal...it's just that the curve is shifted about 500RPM higher in the band. I have taken the low end torque pepsi challenge. I've raced guys with stock manifolds from a rolling start and yes they do get a slight jump but by redline I'm a fender ahead and puling away fast. other guys have done this same test with the same results.

dorks love this mod...can't believe you're passing. but, to each his own.

Eric

peak torque is nealry equal...it's just that the curve is shifted about 500RPM higher in the band. I have taken the low end torque pepsi challenge. I've raced guys with stock manifolds from a rolling start and yes they do get a slight jump but by redline I'm a fender ahead and puling away fast. other guys have done this same test with the same results.

dorks love this mod...can't believe you're passing. but, to each his own.

EricYou make a good point, and pitch. Now I have to think about it again.:rolleyes

You make a good point, and pitch. Now I have to think about it again.:rolleyes

Quite a few people have stated that they a 1-3 MPG better cruising on the freeway.

payment sent for kit #2

Hey Eric, I am planning on buying your kit once my tax return gets here :redspot I was going through your FAQ and saw one about F/I. With an AA supercharger, do you know if I will have fitment problems? And what type of fitment modification I will have to make? Thanks –Rich

Hey Eric, I am planning on buying your kit once my tax return gets here :redspot I was going through your FAQ and saw one about F/I. With an AA supercharger, do you know if I will have fitment problems? And what type of fitment modification I will have to make? Thanks –Rich

you won't have any fitment issues as long as we build it for a FI install. most FI installs do away with the cyclone separator crank vent so you wouldn't need that leg of the adapter. and sometimes AA uses vacuum taps that I like to use so we have to supply extra T's for those junctions.

so knowing a little about your install can make it less expensive as you don't have to order all the other NA stuff.

basically we have to talk before you order so I can find out what and what not to build and include in your kit.

Eric

you won't have any fitment issues as long as we build it for a FI install. most FI installs do away with the cyclone separator crank vent so you wouldn't need that leg of the adapter. and sometimes AA uses vacuum taps that I like to use so we have to supply extra T's for those junctions.

so knowing a little about your install can make it less expensive as you don't have to order all the other NA stuff.

basically we have to talk before you order so I can find out what and what not to build and include in your kit.

Eric

Awesome! sounds great, i will be in touch! :buttrock

Well I don't have the money atm, dam tax day. If there arn't 10 people by next week I going to get it for sure.

1. wojtek79 – full install kit, no manifold - PAID
2. notherm3- full install kit, w/ & w/o manifold
3. Z3Couper – Full install kit, + manifold
4. erbillingsley - M50 Manifold Conversion Kit #3 w/ M50 Cover
5. Rated///m - full install, no manifold
6. foundingfathers - full install kit plus manifold put me down in 2 weeks lol......i get my pay check
7. thbmwm3 - Full install kit + manifold as well.
8. whitecord - I am in for a kit w/o manifold.. - PAID
9. sunzout – full install kit, no manifold
10.contranication- full install, no manifold, w/ fuel cover
11.
12.BoltonM3- Full kit, +manifold, +Fuel Rail cover
13.pro325- Full kit, +manifold, +Fuel Rail cover
14.vietxfire1 full install kit w/o manifold
15.OO7Zummie - full install kit, manifold and fuel rail cover

Kivey - Full install kit, no manifold

OK you guys did a great job until I started receiving the payments. I'm sorry but I can only do 10 kits with free shipping and I stated that it would be offered to the first 10 guys on the list.

I have received 2 payments from guys higher than #10. If other guys drop out and the list scrolls up so you are within the first 10...no problem.

Kivey is out so I put notherm3 in his spot. Z3couper, you need to make up your mind. I will manage the list based on the payments I receive.

Eric

...
Kivey is out so I put notherm3 in his spot. Z3couper, you need to make up your mind. I will manage the list based on the payments I receive.

EricI'm out. Thanks anyway.

1. wojtek79 – full install kit, no manifold - PAID
2. notherm3- full install kit, w/ & w/o manifold
3. BoltonM3- Full kit, +manifold, +Fuel Rail cover
4. erbillingsley - M50 Manifold Conversion Kit #3 w/ M50 Cover
5. Rated///m - full install, no manifold
6. foundingfathers - full install kit plus manifold put me down in 2 weeks lol......i get my pay check
7. thbmwm3 - Full install kit + manifold as well.
8. whitecord - I am in for a kit w/o manifold.. - PAID
9. sunzout – full install kit, no manifold
10.contranication- full install, no manifold, w/ fuel cover
11.
12.
13.pro325- Full kit, +manifold, +Fuel Rail cover
14.vietxfire1 full install kit w/o manifold
15.OO7Zummie - full install kit, manifold and fuel rail cover

Kivey - Full install kit, no manifold
Z3Couper – Full install kit, + manifold

boltonm3 just took z3cooper's spot.

foundingfathers, are you still good for your order when you get your paycheck?

Eric

Top of the list.. and second to pay. Does that mean my kit will go out soon?

Top of the list.. and second to pay. Does that mean my kit will go out soon?

you will be one of the first of this list. I'm going to work in a few every week with my other regular orders....but as I said it's going to take me a couple weeks to get all these out.

Eric

One more spot in the top 10- Take me off as well.. spent to much this month already.

1. wojtek79 – full install kit, no manifold - PAID
2. notherm3- full install kit, w/ & w/o manifold
3. BoltonM3- Full kit, +manifold, +Fuel Rail cover
4. erbillingsley - M50 Manifold Conversion Kit #3 w/ M50 Cover
5. Rated///m - full install, no manifold
6. foundingfathers - full install kit plus manifold put me down in 2 weeks lol......i get my pay check
7. thbmwm3 - Full install kit + manifold as well.
8. whitecord - I am in for a kit w/o manifold.. - PAID
9.
10.contranication- full install, no manifold, w/ fuel cover
11.
12.
13.pro325- Full kit, +manifold, +Fuel Rail cover
14.vietxfire1 full install kit w/o manifold
15.OO7Zummie - full install kit, manifold and fuel rail cover

I will be out of town until monday afternoon so won't be answering emails or posting (prob).

BTW no need to cut and paste the list...I'll take care of it.

1. wojtek79 – full install kit, no manifold - PAID
2. notherm3- full install kit, w/ & w/o manifold
3. BoltonM3- Full kit, +manifold, +Fuel Rail cover
4. erbillingsley - M50 Manifold Conversion Kit #3 w/ M50 Cover
5. Rated///m - full install, no manifold
6. foundingfathers - full install kit plus manifold put me down in 2 weeks lol......i get my pay check
7. thbmwm3 - Full install kit + manifold as well.
8. whitecord - I am in for a kit w/o manifold.. - PAID
9. pro325- Full kit, +manifold, +Fuel Rail cover
10.contranication- full install, no manifold, w/ fuel cover
11.
12.
13.
14.vietxfire1 full install kit w/o manifold
15.OO7Zummie - full install kit, manifold and fuel rail cover

Kivey - Full install kit, no manifold
Z3Couper – Full install kit, + manifold
sunzout – full install kit, no manifold

pro325 just took sunzout's place

I want in too. Full kit + fuel rail cover no manifold needed. Let me know if I am in so I can PayPal. Thanks.

Am I in? I have been wanting your kit since last year... I just got my tax return from Uncle Sam. Can you include me in the group buy Eric? Please.

Please count me in also! I would like the full kit with cover. Thanks. Let me know if I am in and I will paypal you or V/MC which ever is best.

OK I'm back from my weekend with the family. I've only gotten 3 payments from people in the top ten. I've gotten 2 payments from guys #14 & 15.

I'm going to start booting people off the list to get the guys in who really want the free shipping. So pay up or you're off.

Eric

Let me know when I am in. Thanks.

Eric, I still want a second one if there is room. Thanks!

i was wondering when will the first few be shiped? i would like to install mine next week! as i am puting a new clutch in this weekend

1. wojtek79 – full install kit, no manifold - PAID
2. notherm3- full install kit, w/ & w/o manifold
3. BoltonM3- Full kit, +manifold, +Fuel Rail cover
4. erbillingsley - M50 Manifold Conversion Kit #3 w/ M50 Cover
5. Rated///m - full install, no manifold
6. foundingfathers - full install kit plus manifold put me down in 2 weeks lol......i get my pay check
7. thbmwm3 - Full install kit + manifold as well.
8. whitecord - I am in for a kit w/o manifold.. - PAID
9. pro325- Full kit, +manifold, +Fuel Rail cover
10.contranication- full install, no manifold, w/ fuel cover
11.
12.
13.
14.vietxfire1 full install kit w/o manifold - PAID
15.OO7Zummie - full install kit, manifold and fuel rail cover - PAID
16.OO7Zummie - full install kit, manifold and fuel rail cover
17.briandg510 - Full kit + fuel rail cover
18.BoBoUDM//34 - full kit with cover (?manifold?)

Kivey - Full install kit, no manifold
Z3Couper – Full install kit, + manifold
sunzout – full install kit, no manifold




Here is the list as I see it now. Eric it has been two weeks since you stated you would do this GB (4/12/08). It seems most people would have gotten their pay checks by now. Others might be waiting some months for their tax rebates. Just wanting an update for those of us on the wait list. Thanks! :)

I paid for mine yesterday.

that's it. this is the list. this takes way toooooo much of my time to give a discount on top. companies should charge more for group buys. some of you guys are almost as bad as my wife at nagging me.

if you're on the list and you're marked paid your kit will ship tomorrow UPS ground and you should get a tracking number at the address you paypaled me from (except for hawaii, your kit goes USPS rowboat). if you're on the list and not marked paid you may pay me (or not) and your kit will prob ship next week if you do pay (if you pay today it'll prob go out tomorrow with the others).

also, this is a one kit per member deal (sorry I reserve the right to change my mind, Jonathan)


1. wojtek79 – full install kit, no manifold - PAID
2. boboudm//34
4. erbillingsley - M50 Manifold Conversion Kit #3 w/ M50 Cover - PAID
5. vietxfire1 full install kit w/o manifold - PAID
6. OO7Zummie - full install kit, manifold and fuel rail cover - PAID
7. Briang510
8. whitecord - I am in for a kit w/o manifold.. - PAID
9. pro325- Full kit, +manifold, +Fuel Rail cover
10.contranication- full install, no manifold, w/ fuel cover - PAID
11.
12.
13.
14.
15.

Kivey - Full install kit, no manifold
Z3Couper – Full install kit, + manifold
sunzout – full install kit, no manifold
thbmwm3 - Full install kit + manifold as well
Rated///m - full install, no manifold
foundingfathers - full install kit plus manifold put me down in 2 weeks lol......i get my pay check
notherm3- full install kit, w/ & w/o manifold
BoltonM3- Full kit, +manifold, +Fuel Rail cover

pro325 just took sunzout's place
vietxfire1 just took rated///m's place
007zummie took foundingfathers place
Briang510 took thbmwm3's place
boboudm//34 took notherm3's place

GB IS CLOSED!!!!! DON'T ADD YOUR NAME TO THE LIST!!!!! #3 IS DEAD AND GONE AND WILL REMAIN THAT WAY!!!

Eric,

This may sound stupid, but how and where do i go about paying for this and how do I get the GB discount?? I am ready to paypal, just let me know what to do. Thanks,

Eric,

This may sound stupid, but how and where do i go about paying for this and how do I get the GB discount?? I am ready to paypal, just let me know what to do. Thanks,

post #34 http://forums.bimmerforums.com/forum/showpost.php?p=12725137&postcount=34

E

Eric,

Payment is on your way. Thank you very much for giving us this deal! BTW, I marked my name as paid.

Brian

1. wojtek79 – full install kit, no manifold - PAID
2. boboudm//34
4. erbillingsley - M50 Manifold Conversion Kit #3 w/ M50 Cover - PAID
5. vietxfire1 full install kit w/o manifold - PAID
6. OO7Zummie - full install kit, manifold and fuel rail cover - PAID
7. Briang510 full install kit, no manifold, with cover PAID
8. whitecord - I am in for a kit w/o manifold.. - PAID
9. pro325- Full kit, +manifold, +Fuel Rail cover
10.contranication- full install, no manifold, w/ fuel cover - PAID

Paid in full!! Thanks for the GB:alright Oh....Full manifold kit with cover...

ok guys. I was supposed to ship the remainder of the kits last thursday and friday...I had those days set aside for it. then I got called out on a trip and was supposed to be back friday evening. well that didn't happen, I'm still in New York, and tonight I'm heading to France for possibly 2 weeks.

I know I know...this sucks. Sorry I have no control.

I'll get the kits out ASAP when I get back.

E

Got my kit a few days ago. Thanks man

are these kits still available? I would like one, no manifold needed tho. PM me!!

are these kits still available? I would like one, no manifold needed tho. PM me!!

link to my website in my sig...or my other thread too.

email me.

Eric