XixangE34
04-02-2008, 11:26 PM
Well it is time to start thinking about a new track car.
Asking Half of what it would cost you to buy or build this
$12,500.
93 325is with 170,xxx on the body with S52 swap
Body has Turner reinforcement kit on rear sub frame mounts, rear sway bar mounts, and front sub frame.
No interior except door panels and dash board
4 point welded in roll bar with harneses
Sparco speed seats both driver and passenger
M3 sterring wheel
No A/C at all
Power windows and door lock still work
All lights still work
Wipers work
E36 M3 mirrors
E36 M3 front lip on stock 325 bumper
M3 cluster
Welded sunroof
Drive line
110,xxx on 3.2 engine and trans
Motul 300v 10w40 ester racing oil in engine
Engine has new headgasket and VAC oil pan baffel installed
Trans is stock with JB racing Flywheel, sprung hub clutch kit, and brand new stock M3 shifter
E36 M3 rear sub frame with 3.23 lsd diff and axels
Stock 3.2 headers, custom 3" exhaust with cat and muffler all painted black
Suspension
TC kline Externaly adjustable M3 Konis with TC kline shock mounts
H&R race springs (stock perches)
4.0% camber front
VAC adjustable lower camber arms
Stock 325is sway bar mounted with M3 links (higher rate than M3)
M3 stock rear sway bar
X-brace
M3 steering rack
New rear lower ball joints
Brakes
E36 M3 brake front and rear
Hawk DTC70 front DTC60 rear pads
Euro M3 floating front rotors
Stock rear rotors
E46 stainless lines
Motul RBF600 fluid
Fresh rebuild on front calipers with brass bushing kit
Extra rotors come with car
Wheels and tires
6 D-force 17x8.5 grey wheels with 225/45/17 Hoosier cup tires
4 BBS two piece wheels (old school)
2 235/45/17 Azines with 2/32nds
2 255/40/17 PS2 with 4/32nds
Flaws
Normal dings and dents
Crack in front wind sheild
ABS light on but ABS works (Late E36 cluster)
Small dent at right rear quarter and trunk
Old paint
More coments to come as I think of them
http://i249.photobucket.com/albums/gg224/xixange34/IMG_2727.jpg
http://i249.photobucket.com/albums/gg224/xixange34/IMG_2644.jpg
http://i249.photobucket.com/albums/gg224/xixange34/IMG_2728.jpg
Asking Half of what it would cost you to buy or build this
$12,500.
93 325is with 170,xxx on the body with S52 swap
Body has Turner reinforcement kit on rear sub frame mounts, rear sway bar mounts, and front sub frame.
No interior except door panels and dash board
4 point welded in roll bar with harneses
Sparco speed seats both driver and passenger
M3 sterring wheel
No A/C at all
Power windows and door lock still work
All lights still work
Wipers work
E36 M3 mirrors
E36 M3 front lip on stock 325 bumper
M3 cluster
Welded sunroof
Drive line
110,xxx on 3.2 engine and trans
Motul 300v 10w40 ester racing oil in engine
Engine has new headgasket and VAC oil pan baffel installed
Trans is stock with JB racing Flywheel, sprung hub clutch kit, and brand new stock M3 shifter
E36 M3 rear sub frame with 3.23 lsd diff and axels
Stock 3.2 headers, custom 3" exhaust with cat and muffler all painted black
Suspension
TC kline Externaly adjustable M3 Konis with TC kline shock mounts
H&R race springs (stock perches)
4.0% camber front
VAC adjustable lower camber arms
Stock 325is sway bar mounted with M3 links (higher rate than M3)
M3 stock rear sway bar
X-brace
M3 steering rack
New rear lower ball joints
Brakes
E36 M3 brake front and rear
Hawk DTC70 front DTC60 rear pads
Euro M3 floating front rotors
Stock rear rotors
E46 stainless lines
Motul RBF600 fluid
Fresh rebuild on front calipers with brass bushing kit
Extra rotors come with car
Wheels and tires
6 D-force 17x8.5 grey wheels with 225/45/17 Hoosier cup tires
4 BBS two piece wheels (old school)
2 235/45/17 Azines with 2/32nds
2 255/40/17 PS2 with 4/32nds
Flaws
Normal dings and dents
Crack in front wind sheild
ABS light on but ABS works (Late E36 cluster)
Small dent at right rear quarter and trunk
Old paint
More coments to come as I think of them
http://i249.photobucket.com/albums/gg224/xixange34/IMG_2727.jpg
http://i249.photobucket.com/albums/gg224/xixange34/IMG_2644.jpg
http://i249.photobucket.com/albums/gg224/xixange34/IMG_2728.jpg