View Full Version : Differences between OptiSeal, Zaino ZCS and Ultima PPP?


Jed
03-22-2008, 07:33 PM
Looking at these 3 products, do these all have the same function-a long term sealant?

From what I gather, sounds like all 3 can be applied at the end of detail, including over a cured layer of carnuaba.

Has anyone had experience in durability between the 3?

I plan on doing my friend's RSX-S and he's the type to not really wax his car-just runs it through the wash. So I am looking to do a thorough claying, swirl removal, glaze and sealant, then top it with a carnuaba.

Do these products dull the LSP or does it make it pointless with the LSP by taking away any depth and warmth and just make it shiny?

Thanks

Woob
03-22-2008, 09:38 PM
They are all LSPs in form. ZCS I always recommend to keep with the Z2/Z5 Pro sealants as they are designed to be compatible with each other. OS can be used as a standalone or either on top/below a carnauba (Top is my suggestion). Ultima Paint GUARD Plus is similar to OS as a stand alone. Ultima/Zaino are probably very good on durability (6 months if done right), but it's purely dependent on preparation. OS might lack, I've found it quite adequate and a step above previous sealants I've used. I don't see the issue of durability when you consider just how mind blowing easy it is to apply the WOWA application.

ZCS can be applied over Z Layers activated with ZFX (I believe). OS is better to wait 12 - 24 hours, but you can do it over a coat 1 hr apart. Ultima I'd wait the 12 hour time period. ZCS is the clear layer, it just seals in even more what it is beneath. OS/Ultima are independent and have their own looks.

Can't emphasize enough proper curing & preparation.

MrNorwall
03-22-2008, 09:45 PM
Put under carnuabas, the wax is slippery and sealants will have a tough time to bond, the Ultima and OS are spray sealants, i havent tried either, but i just ordered Opti seal like 5 min ago