sways w/ bushings and rear end links.

$70 plus shipping

http://home.cfl.rr.com/broadus/swaysweb.jpg

what year M3?

98

Fit a 97 328?

Fit a 97 328?

i think they do but w/out m3 struts you would still need to mount them to the control arm(?). maybe someone more familiar w/ the non m's can chime in.

tempted.... Best price shipped to 06786?

$70 shipped is the best price i can offer.

tempted.... Best price shipped to 06786?

I only need the rear bar with bushings, brackets, and links. Split the set? I'm in Raleigh, NC.

i'll send the rear for $40 shipped. pm me if you want it.



I only need the rear bar with bushings, brackets, and links. Split the set? I'm in Raleigh, NC.

if you use me sways on a 328 you need new struts for the m3...otherwise you wont be able to use them. not sure about the rear though. probably the same.

no, you're completely wrong. you can use any bar on any car. The m3 bar however is smaller in the front than the 328 or even 318 since it mounts differently. It mounts to the shocks. You could use it and mount it to the control arms but you wouldnt want to do that.

the rear is the same, you can bolt it right in place. its just larger.

no, you're completely wrong. you can use any bar on any car. The m3 bar however is smaller in the front than the 328 or even 318 since it mounts differently. It mounts to the shocks. You could use it and mount it to the control arms but you wouldnt want to do that.

the rear is the same, you can bolt it right in place. its just larger.

so you need new shocks if your going to run it on a 328...since 328 shocks dont have a mounting point for the m3 sway.

so you need new shocks if your going to run it on a 328...since 328 shocks dont have a mounting point for the m3 sway.
no you dont NEED new shocks, you just would have to mount it to the control arms instead of the shocks. And if you're going to do that you can just mount your stock bar to the shocks if you get some shocks that have the mounting tabs.