View Full Version : a chip for the new guy!
OUTLAW840ci 03-07-2008, 06:23 AM hey guys whats up....so i just got my 1995 840ci tonight.......im lookin o buying a chip for the motor and tranny.....what are the best ones? is this a good one?>>>>> cgi.ebay.com/ebaymotors/Performance-chip-BMW-E31-E32-E34-V8-326HP-480Nm_W0QQcmdZViewItemQQcategoryZ33597QQihZ011QQit emZ320225538506QQrdZ1QQsspagenameZWDVW
Toy72 03-07-2008, 09:00 AM Check the thread "performance chips".
moonslook 03-07-2008, 06:11 PM I would say on a 95 you have to go with dinan software for the engine and the tran
Koizumi 03-07-2008, 06:33 PM For OBC-I and "404" Motronic, go for Wokke2000 engine chip. Best bang for your $. For the tranny, Dinan chip.
330newbie 03-07-2008, 06:44 PM Second Koizumi's thoughts here -- these two in combination will really wake up your 840. Sure worked on mine !
Cheers Keith
OUTLAW840ci 03-08-2008, 05:41 AM thanks guys....big help...so far i love the car...if any of u guys are from Los Angeles i took it on the sepulveda pass tonight....impressed i have to say.
Koizumi 03-09-2008, 02:31 PM Nice road when there's no traffic! Enjoy ridin' that fine fine machine :buttrock Cheers
OUTLAW840ci 03-11-2008, 12:30 AM so do any of u guys have the wokke chip in a 840ci? if u do, do u feel a gain on the low end?
TerryY 03-11-2008, 09:12 AM Yes that is where most of the V8 gain appears-down low instead of up high for top speed.
Check the build date on the end of the door. A lot of '95 models were built in '94 and are very chippable.
Koizumi 03-12-2008, 01:08 PM My V8 is a different beast with the Wokke chip installed. Night & day. Worth every penny.
OUTLAW840ci 03-12-2008, 04:05 PM so i checked the build date on my car....its a 95 model but the build date reads 11/95.....does wokke make one for that build date? i checked his ebay listing and it said it wont work on '95 onwards with EWS II....so his chip wont work on my 840?...damn, that would be a shame.
Koizumi 03-12-2008, 04:46 PM Looks like you might be out of luck. From my research, cars built until the end of December 1994 used the correct Motronic. My '95 was built 11/94
To be sure, you need to check the Motronic and see if the Motronic # ends in "404". If it ends in "484", you're outta luck.
Contact Wolf via this forum or thru the eBay listing as to how to check for the Motronic #.
HappyLABimmer 03-12-2008, 05:38 PM Any chips for the M73 engine? Just wondering if any guys here know if DINAN is every going to offer the turbos again?
Koizumi 03-12-2008, 06:03 PM Not sure about OBC-II cars. You're looking at reprogramming. I think that the Dinan transmission chip will work though on OBC-II cars.
I am sure that Dinan will not offer Turbos for E31 applications. Sadly those days are over.
840rod 03-12-2008, 06:33 PM Check here
http://www.turnermotorsport.com/html/show_category.asp?txtsearchParamCat=Engine%20Chips #PerformanceChips:1985-1995Cars
Be sure to check here for applicability
http://www.turnermotorsport.com/pages/chip_id_new05.htm
Good luck and if it doesn't fit post back.
Yo,
Rod
HappyLABimmer 03-12-2008, 06:45 PM Thanks...hmmm...stops 1995. Will give them a buzz. Yup...wished DINAN still offered. We will all have bigger smiles.
OUTLAW840ci 03-12-2008, 08:05 PM damn...im gonna check my ecu tonight....im sure its not the 404....its the turner motorsports one any good?
e31bubba 03-12-2008, 08:13 PM damn...im gonna check my ecu tonight....im sure its not the 404....its the turner motorsports one any good?
I have the turner and was able to tell a big difference
840rod 03-12-2008, 08:43 PM Aren't they Conforti ... ?? They mention his name, kinda assumed they used his program.
Yo,
Rod
Toy72 03-13-2008, 08:52 AM When it's time, I will get the Wokke chip. I have heard nothing bad from any of the posts here about them.
|