I'm thinking about changing the right front turn signal lamp myself. I looked under the hood and saw a couple of obvious fasteners but that only made the lense assembly loose. Does anyone know how I can get at the turn signal lamp? I need the help, thanks.

Yes, the whole thing needs to come off. Pry off the trim under the headlight from the center out, then you have 4 8mm screw fasteners to remove. The bottom ones match the top obvious ones, so you know what to look for. You will need an extension, and put something sticky on your socket so you don't drop it down intot he bumper.

Island52
Shouldn't you own a Ferrari? Hey thanks for the quick reply to my post. Just to make sure before I break something, the trim below the lens comes straight out starting at the middle of the trim. Will they match the tension of the hood gasket fastners so I can know how hard to pull?

Pull starting from the side closest to the kidney grills. It will need a good sharp tug, but don't go crazy.

Higgins took back the Ferrari :(

Doesn't the whole headlight have to come out? IME, there are just 4 torx screws that need to be taken out that can be gotten to by just lifting the hood, then the lamp slides forward and you can get to the t/s bulb. (maybe I wan't working on an '03? Did something get changed with the headlights midproduction?)