I have a set of Prospeed bbk brackets, hats with decent 993tt rotors and ferrodo ds2500 pads for sale... Brackets and hardware are in decent shape and threads are all clean on brackets... The rotor hats are alittle beat up around the hub but the rotors are trued and strait... The ferrodo pads have lots of life left... the only thing you would need to source is some 993tt calipers and some brake lines... will let all of this go for $250 shipped...

Hmmm how much would the 993 calipers run? could they be found used?? Can this run with the stock rears and master cyl?

Thanks

You will have to do your homework but you can source some 993 calipers for about 650... The calipers will need to be slightly modified (have about 10mm shaved off of the bottom of the caliper where the bracket mounts to it) but any competient machine shop could do that for next to nothing... I ran these brackets and hats on my 98 m3 with very little modification (very minor shaving of the fork where the bracket mounts) and everything was fine... check ebay for 993tt calipers... Here is a link... As for lines, any 11 or 12 inch lines should work fine...

http://cgi.ebay.com/ebaymotors/Porsche-911-993-Big-Red-Calipers-NEW-Black_W0QQcmdZViewItemQQcategoryZ33563QQihZ018QQit emZ280200495577QQrdZ1QQsspagenameZWDVW

Craig

I am interested. Could you either post some pics, or e-mail them to me at e36bmer @ yahoo.com

Here are the pics...

http://img.photobucket.com/albums/v318/cpcalkins/IMG_1734.jpg

http://img.photobucket.com/albums/v318/cpcalkins/IMG_1733.jpg

http://img.photobucket.com/albums/v318/cpcalkins/IMG_1732.jpg

http://img.photobucket.com/albums/v318/cpcalkins/IMG_1731.jpg

Bump

Sold to JBracer...