Well as alot of you know i had some issues with a vendor selling me pistons that do not work with my custom application. I have tried to find every way possible to try and work things out but im goin to just buy the correct set from VAC. I will post the spec sheet for those interested.they were installed and once it was clear they would not work they were removed. i only have pics of them before i sent them to the machince shop

price is more than fair i believe...$675 shipped in the US, originally paid $1000


mods please let this sit for a little while...hopefully somebody looking to save a few bucks can help me out as well :)

http://m3crazy.com/images/pistons.pdf

http://i8.photobucket.com/albums/a16/vdubdork/turbo031.jpg

marcelo

specs?

specs?
+1

i cant seem to be post the spec sheet, feel free to email me me and ill send it over asap

or if i emailed it to someone who could post it, thatd be great!

what bore?
what comp?

8.5 compression, 84.5mm bore

8.5 CR with what crank? I call first dibs if I can get the exact spec sheet on them!

8.5 CR with what crank? I call first dibs if I can get the exact spec sheet on them!

email??

not sure why i cant post it!! :(

they were supposed to be made to fit my s52 crank but thats what was custom about my whole build and thats why i cant use these

email??

not sure why i cant post it!! :(

they were supposed to be made to fit my s52 crank but thats what was custom about my whole build and thats why i cant use these

email it to m3crazy@m3crazy.com and i will host the pic for you....

email it to m3crazy@m3crazy.com and i will host the pic for you....


email sent, thanks drew

click me for specs (http://m3crazy.com/images/pistons.pdf)

spec sheet now posted as well as the first picture i could find

:confused
you mention you have a s52 crank...did you build a stroked nv...i just assumed because you have a 99 that you have a s52. can i assume that the bore is also standard(86mm iirc)for the s52. im probably wrong because they wouldnt be that custom at this point because we have options already for such a setup. can i have some additional info.

:confused
you mention you have a s52 crank...did you build a stroked nv...i just assumed because you have a 99 that you have a s52. can i assume that the bore is also standard(86mm iirc)for the s52. im probably wrong because they wouldnt be that custom at this point because we have options already for such a setup. can i have some additional info.


vanos stroker, m52 block, bored out to 84.5...with s52 crank and head.m52 length rods and cistom pistons....ive been working on this motor and setup for 14 months now.:shifty laaaame...but yea its the same basic motor that rrdawho, bmwperson have or had these guys go through more changes than i can keep up with.;)

so its the height that is getting in the way?

of planned compression?

Can i use them in a M52 2.8 original engine ?

pms replied....buuuump


i just wana finish my car =(

pms replied....buuuump


i just wana finish my car =(
I want you to finish it too. :(

I want you to finish it too. :(i want you to get your rims on

I want you to finish it too. :(


its only been over a year, 15 months. half of which wasnt my fault


option 1: buy the custom rods and get this over with
option 2: buy the correct pistons for MY application and get this over with...


if i can find the cheapest carrillo vendor id place an order monday:)