View Full Version : Parting Out 95 M3 100k


bennetts22
02-11-2008, 01:58 PM
Car is purple with dove grey. hit in the front. car had 100,560 miles. Its has a good running S50. LMK if you guys need anything.
thanks

rmn
02-11-2008, 06:58 PM
Do you have the (I-bus) cable that goes to the CD Changer I really only need the end at the radio (with at least 6" of cable)?

TIA

biggyalex
02-11-2008, 07:00 PM
i need alot of stuff email me biggyalex@hotmail.com

Voyd
02-11-2008, 08:17 PM
Passenger side fender?

asuj158
02-11-2008, 09:38 PM
coupe mirrors?

RisBMW
02-11-2008, 09:50 PM
Pics of Rear Bumber? $$ Shipped to 06001?

Cosmos96
02-11-2008, 09:52 PM
passenger door panel? does it look like this one in my post? it can be any color and in any condition.

http://forums.bimmerforums.com/forum/showthread.php?t=933535

Boris1111
02-11-2008, 10:50 PM
Do you have the leather wrapped trim insert that is above the glovebox between the A/C vents?

Let me know with a PM, thanks!

bennetts22
02-12-2008, 12:16 AM
Do you have the (I-bus) cable that goes to the CD Changer I really only need the end at the radio (with at least 6" of cable)?
20.00
TIA

i need alot of stuff email me biggyalex@hotmail.com
my email is bennetts22@aol.com
Passenger side fender?
i have a drivers thats it
coupe mirrors?
make me a offer they are complete
Pics of Rear Bumber? $$ Shipped to 06001?
300 plus 75 for shipping?
passenger door panel? does it look like this one in my post? it can be any color and in any condition.
no door panel
http://forums.bimmerforums.com/forum/showthread.php?t=933535

Do you have the leather wrapped trim insert that is above the glovebox between the A/C vents?

sorry i dont have this

Let me know with a PM, thanks!

asuj158
02-12-2008, 12:31 AM
Are the mirrors manual or power and heated? Also what color, I didnt see what color your car is.

dorejades
02-12-2008, 03:17 AM
Hey there I'm looking for the rear axle carrier, stock headers, o2 sensors..how much shipped to 95207

kpgc10
02-12-2008, 05:09 AM
pm'd

Spoose
02-12-2008, 11:02 AM
What condition are the rear shocks in?

bennetts22
02-12-2008, 12:10 PM
What condition are the rear shocks in?
good 75.00 shipped
Hey there I'm looking for the rear axle carrier, stock headers, o2 sensors..how much shipped to 95207
pm replied
Are the mirrors manual or power and heated? Also what color, I didnt see what color your car is.

mirrors are factory power and heated in purple

Spoose
02-12-2008, 12:21 PM
I'll give you $50 for the rear shocks shipped.

MBe36
02-12-2008, 01:29 PM
Midpipe?

Moldings?

bennetts22
02-12-2008, 10:55 PM
I'll give you $50 for the rear shocks shipped.
60 and its a deal
Midpipe?

Moldings?

no midpipe
115 shipped on all the side moldings

biggyalex
02-12-2008, 11:09 PM
hi need the m3 mirrow both side how much

dorejades
02-12-2008, 11:11 PM
Rear Axle Carrier#1 If you have it ill take it for what you asked for, do you have pictures of the stock headers.

http://i132.photobucket.com/albums/q35/dorejades/RearaxleCarrier.png

mattsquier
02-13-2008, 01:10 AM
what air intake do you? Price
Thanks matt
mlshometheaters .com

350chevrolet
02-13-2008, 02:48 AM
how much for the s50

bennetts22
02-13-2008, 02:25 PM
hi need the m3 mirrow both side how much
280 shipped
Rear Axle Carrier#1 If you have it ill take it for what you asked for, do you have pictures of the stock headers.

http://i132.photobucket.com/albums/q35/dorejades/RearaxleCarrier.png
yes i have #1 i can get you a picture later tonight
what air intake do you? Price
Thanks matt
mlshometheaters .com
sorry no intake
how much for the s50

3400 shipped complete minus DME

SeeMeFly
02-13-2008, 06:43 PM
were the fog lights and brackets damaged?

TT Racing
02-13-2008, 07:40 PM
Would you sell the dove front seat headrests?

jay01
02-14-2008, 08:16 AM
do you have the front brake cooling ducts(plastic), i need those and the fog light switch, the coin dispenser in the center console. do you have these things and how much shipped to 98125. thanks. jay (206)235-5217

drexel912
02-14-2008, 11:18 PM
you have PM

Hathaway
02-15-2008, 01:33 AM
Clutch, pressure plate, flywheel; how much, and what condition are they in? Where at in Wisconsin?

Shaetoon
02-15-2008, 04:49 AM
coin cup tray from center counsil? ...anychance you got that,
or
4 spoke m steering wheel?
Send me a PM if so.

dorejades
02-15-2008, 06:31 AM
Where you @ bro?

bennetts22
02-15-2008, 10:13 AM
were the fog lights and brackets damaged?
car was hit in the front no fogs

Would you sell the dove front seat headrests?
i want to keep the vaders together
do you have the front brake cooling ducts(plastic), i need those and the fog light switch, the coin dispenser in the center console. do you have these things and how much shipped to 98125. thanks. jay (206)235-5217
no i dont
Clutch, pressure plate, flywheel; how much, and what condition are they in? Where at in Wisconsin?
clutch is fairly new and so is the flywheel 175 shipped
coin cup tray from center counsil? ...anychance you got that,
or
4 spoke m steering wheel?
Send me a PM if so.

50.00 for the wheel in good condition with no slip ring and 25.00 for the cup holder with the coin holder. I am in Appleton 2 hours from chicago

sapienti
02-15-2008, 03:27 PM
what diff. is in there, and how much to 91932? Thanks.

xalwayswins
02-15-2008, 04:30 PM
rear diffuser? how much shipped to 23114?

bennetts22
02-15-2008, 11:38 PM
what diff. is in there, and how much to 91932? Thanks.
i will check and let you know.
rear diffuser? how much shipped to 23114?

i am going to keep it with the bumper.


I also have a DTM 2 piece wing, strut bar brand unknown, eibach sport springs and one depo headlight with HID's. The car also had some AC wheels but they were chromed and will need to be painted they are 17's

dorejades
02-16-2008, 05:34 AM
How's you're rear differential doing, if great how much shipped to 95240
also do you happened to have the stock radio

Tank0001
02-16-2008, 02:28 PM
do you have the front bumper still? PM me

bennetts22
02-16-2008, 02:36 PM
How's you're rear differential doing, if great how much shipped to 95240
also do you happened to have the stock radio

75 on the radio and 300 shipped on the diff

bennetts22
02-16-2008, 07:34 PM
side moldings are sold. no front bumper or cats

138
02-16-2008, 08:14 PM
sent pm

bennetts22
02-17-2008, 10:58 AM
once again the cats are not for sale. i continue to get pm's on them

BSH
02-17-2008, 04:36 PM
I'm interested in the following parts:

ABS control module
ABS "hydro" pump
master cylinder and expansion tank

How much?

bennetts22
02-18-2008, 12:29 AM
I'm interested in the following parts:

ABS control module
ABS "hydro" pump
master cylinder and expansion tank

How much?



let me know were the stuff is and you can have it for 100 shipped

BSH
02-18-2008, 01:24 AM
let me know were the stuff is and you can have it for 100 shippedThe pump and master cylinder are on the driver's side of the engine compartment near the firewall...right next to (and slightly below) the fuse box. I'm not sure where the ABS control unit is...maybe behind the glove box?

Here are images from the ETK. I need parts...

#1 and #5

http://img.photobucket.com/albums/v420/trailerparkboy/etk-master-cylinder.png

#1 and #5

http://img.photobucket.com/albums/v420/trailerparkboy/etk-abs-parts.png

joon
02-18-2008, 09:15 AM
looking for the complete fusebox with fuses and relays.. let me know how much you want for it :)

bennetts22
02-18-2008, 09:59 PM
The pump and master cylinder are on the driver's side of the engine compartment near the firewall...right next to (and slightly below) the fuse box. I'm not sure where the ABS control unit is...maybe behind the glove box?

Here are images from the ETK. I need parts...

#1 and #5

http://img.photobucket.com/albums/v420/trailerparkboy/etk-master-cylinder.png

#1 and #5

http://img.photobucket.com/albums/v420/trailerparkboy/etk-abs-parts.png
no problem on the master and the bottle i know were that is but will have to find the computer.
looking for the complete fusebox with fuses and relays.. let me know how much you want for it :)


do you need all the wiring or can it be cut?

Vintage Metal
02-19-2008, 03:37 AM
need heater control valve.

Please send PM if you got one

ALLADULTVIDEO
02-19-2008, 04:51 AM
Hi,

I need the DME. Let me know if it's for sale and how much...

vanman25
02-19-2008, 02:23 PM
Is your car a coupe? If so, dDo you have the underpanel and mounting hardware - see link? http://forums.bimmerforums.com/forum/showthread.php?t=906595&highlight=underpanel

Send me a PM

Vintage Metal
02-19-2008, 06:24 PM
Looking for rear lower control arms; if adaptable to E36 convertable (1994)

How much?

dorejades
02-20-2008, 01:43 AM
Pm'd You.......

joon
02-20-2008, 02:43 AM
do you need all the wiring or can it be cut?
I'd like as much of the wiring intact as possible.. but some places you have to cut.. how much do you want for it? Thanks!

bennetts22
02-20-2008, 02:29 PM
need heater control valve.

Please send PM if you got one
its sold already
Hi,

I need the DME. Let me know if it's for sale and how much...
i am keeping it with the engine
Is your car a coupe? If so, dDo you have the underpanel and mounting hardware - see link? http://forums.bimmerforums.com/forum/showthread.php?t=906595&highlight=underpanel

Send me a PM
i dont have these
Looking for rear lower control arms; if adaptable to E36 convertable (1994)

How much?
150 a side with no brakes
I'd like as much of the wiring intact as possible.. but some places you have to cut.. how much do you want for it? Thanks!
I am sorry but i dont want to sell this if i have to take the dash out to get at the harness

bavarian328is
02-20-2008, 05:26 PM
hey not sure if your cars a 2 door but I need #1 in the picture how much to 02917

http://img.photobucket.com/albums/v737/Skierxx5556/35.png

bennetts22
02-21-2008, 06:06 PM
hey not sure if your cars a 2 door but I need #1 in the picture how much to 02917

http://img.photobucket.com/albums/v737/Skierxx5556/35.png

25 ea for the rubber moldings

BSH
02-21-2008, 06:10 PM
no problem on the master and the bottle i know were that is but will have to find the computer.How soon can you ship?

NFG168
02-22-2008, 01:00 AM
what kind of interior do you have?

joerodd
02-22-2008, 01:09 AM
heated seats?

mweinst
02-22-2008, 01:28 PM
If the ABS pump (aka Hydro unit) doesn't sell, let me know. I want it if it is working condition.

joon
02-22-2008, 04:36 PM
I am sorry but i dont want to sell this if i have to take the dash out to get at the harness
how bout just cut the wires and gimme the whole fusebox? how much do you want for it? :)

steelblue3
02-22-2008, 08:42 PM
Dove glove box that doesn’t sag? Thanks...

3DGE95Ti
02-22-2008, 10:10 PM
Looking for rear bumper corner molding and m3 bumper lip.

graphikg
02-25-2008, 11:52 PM
PM sent.

Bmmr2neR
02-26-2008, 12:11 AM
I need the lower cover piece for the glove box. Pm'd.

Danni540
02-26-2008, 01:41 AM
Is it a sunroof model?

If not, how much for the black roof interior complete with all pillars and handles and covers shipped to 23455?

PS. I understand you have to remove either the front or the rear window to get the roof headliner out so it's no problem for me if it's the last thing you'll do, I can wait if you have the parts I need :)

derrith
02-26-2008, 02:08 PM
heated seats?

I'd also like to know. I'm looking for the wiring harness for the heated seats.

Thanks.

BSH
02-26-2008, 03:03 PM
Has anyone received a reply from the OP?

mweinst
02-26-2008, 05:08 PM
Nada

BMWMPow3r
02-27-2008, 11:37 AM
i need the white connector for the instument cluster and the headilght connectors.

bavarian328is
02-27-2008, 01:57 PM
Has anyone received a reply from the OP?

he just pm'd me

bennetts22
02-29-2008, 09:48 PM
How soon can you ship?
when ever
what kind of interior do you have?
dove vaders no heat and manual
heated seats?
no
how bout just cut the wires and gimme the whole fusebox? how much do you want for it? :)
40.00
Dove glove box that doesn’t sag? Thanks...
sold
Looking for rear bumper corner molding and m3 bumper lip.
dont have
Is it a sunroof model?

If not, how much for the black roof interior complete with all pillars and handles and covers shipped to 23455?

PS. I understand you have to remove either the front or the rear window to get the roof headliner out so it's no problem for me if it's the last thing you'll do, I can wait if you have the parts I need :)
sorry car had a sunroof
i need the white connector for the instument cluster and the headilght connectors.
dont have this

InsaneM3
02-29-2008, 09:56 PM
Do you have a passenger side tailight cover?

3DGE95Ti
03-01-2008, 12:00 AM
I am looking for interior trim pieces. PM me!

mphmotorwerks
03-01-2008, 05:04 AM
How much for the shift lever

bennetts22
03-01-2008, 01:41 PM
Do you have a passenger side tailight cover?
15.00
I am looking for interior trim pieces. PM me!
what do you need?
How much for the shift lever

the shifter not the trans brace? 25.00

e36bmdub
03-01-2008, 01:45 PM
do you have keyless/alarm? if so i need this wiring harness..

http://i134.photobucket.com/albums/q117/weezy_wee/Pic1-01.jpg

I am also interested in the rear passanger side window seal.

Shaetoon
03-01-2008, 02:44 PM
50.00 for the wheel in good condition with no slip ring and 25.00 for the cup holder with the coin holder. I am in Appleton 2 hours from chicago

You have any pics of it for me to see?...also do you know if it will fit into my '94 325i center counsil???...Considure it sold for $25 shipped.
Get back to me and let me know paypal and pics with info on the fitment.;)

*edit*
shaetoon@gmail.com

bavarian328is
03-03-2008, 12:08 AM
shipment update??

BMWMPow3r
03-04-2008, 10:26 AM
instrument cluster?

mweinst
03-05-2008, 06:23 PM
Shipping update please!

bennetts22
03-05-2008, 10:47 PM
do you have keyless/alarm? if so i need this wiring harness..
didnt have it
http://i134.photobucket.com/albums/q117/weezy_wee/Pic1-01.jpg

I am also interested in the rear passanger side window seal.
didnt have it
instrument cluster?
150.00
Shipping update please!

all parts sold recent were shipped ups ground on monday
thanks

svn2002s
03-06-2008, 08:58 PM
I need a steering rack, shipped to 94597

Shaetoon
03-07-2008, 04:36 PM
sent you a PM, still have it?

calypso325
03-07-2008, 07:03 PM
how much for vaders, what condition, power? im in michigan can pick them up. thanx

bennetts22
03-10-2008, 11:08 PM
I need a steering rack, shipped to 94597
sold
how much for vaders, what condition, power? im in michigan can pick them up. thanx

also sold

Shaetoon
03-11-2008, 02:49 AM
any updates for me?..have you sent this out yet?

cheades
03-11-2008, 09:56 AM
How much for the front spindles?

e30lyf
03-11-2008, 11:26 PM
sreering rack still available & how much? LMK by PM if still have it. thanks

hawebmw
03-13-2008, 11:41 AM
Do you still have the motor?

bennetts22
03-15-2008, 09:47 AM
How much for the front spindles?
75 ea.
sreering rack still available & how much? LMK by PM if still have it. thanks
it was broken
Do you still have the motor?

100k asking 2650.00 shipped complete with the dme

Shaetoon
03-15-2008, 03:58 PM
bennetts22 (http://forums.bimmerforums.com/forum/member.php?u=43031) the cup/coin holder you sent me infact had many broken parts to this.

I will send you a PM as respect to you handeling this, b4 I post it in the thread.
Thank you,

abq
03-15-2008, 04:20 PM
have the trans? how much?

bennetts22
03-15-2008, 10:49 PM
bennetts22 (http://forums.bimmerforums.com/forum/member.php?u=43031) the cup/coin holder you sent me infact had many broken parts to this.

I will send you a PM as respect to you handeling this, b4 I post it in the thread.
Thank you,
honest mistake free one on the way
have the trans? how much?

400.00

damon427
03-16-2008, 11:55 AM
how about the air conditioning compressor, how much for it?

Shaetoon
03-17-2008, 01:43 AM
Thats more then generious of you, Thank you.

xvxax
03-17-2008, 07:18 PM
Do you still have the pork chops?

96cali
03-18-2008, 12:23 PM
price on side skirts shipped to cincinnati oh 45227? what condition are they in?

dannyyisntt
03-18-2008, 04:33 PM
Do you still have the dme and engine harness?

ssssly
03-20-2008, 09:15 AM
How much for the turn signal switch?

Shaetoon
03-29-2008, 01:39 AM
any updates? ...have you shipped this out for me yet? Because i have not gotten anything!~

kneedeep
03-29-2008, 10:08 PM
i need a complete lockset including keys

MTrace
03-30-2008, 09:38 AM
Floor mats in good shape? lmk. thanks

328iJunkie
03-30-2008, 10:01 PM
Drivers side spindle?

bennetts22
04-03-2008, 01:11 PM
I need a steering rack, shipped to 94597
i have another one for 200 shipped
How much for the front spindles?
80 ea.
Drivers side spindle?

80ea.

and the cup holder i will send you the tracking number i was gone for work for awhile.
thanks

OBD 1 5 speed wiring 150.00 and 175 for the dme

jorgiem3
04-03-2008, 04:49 PM
how much for the m3 cams shipped to 92154

hurrican5547
04-03-2008, 07:58 PM
is the power steering system still available? looking for the hoses specifcally

Scott1110
04-04-2008, 09:50 AM
How much for the mirrors? Rear kick plates? shipped to 21014

chazpin
04-04-2008, 01:34 PM
Shift knob still around? Is it lit?

bennetts22
04-06-2008, 10:02 PM
how much for the m3 cams shipped to 92154

engine is sold

is the power steering system still available? looking for the hoses specifcally


gone with rack
How much for the mirrors? Rear kick plates? shipped to 21014


175 for the mirrors what rear kick plates?
Shift knob still around? Is it lit?


gone thanks

bennetts22
04-07-2008, 10:18 AM
sent you a PM, still have it?



ups tracking number

1z3t72f80394088184

thanks

Shaetoon
05-06-2008, 03:43 PM
ups tracking number

1z3t72f80394088184

thanks

Please Check the tracking number, I have not gotten anything in the mail for a while now? :confused

...can you let me know whats going on please?
THank you-

RAC400
05-06-2008, 04:01 PM
How about the front electric aux fan. zip 91724

raoke
05-06-2008, 04:34 PM
passenger m3 mirror... glass only if possible.

M3anVr6t
05-11-2008, 11:53 PM
i need the front bumper assembly, radiator,facelift nose panel, radiator support, hood, drivers fender, brake ducts, and other random plastic pieces on the bumper

let me know how much

acs325i
05-12-2008, 09:49 PM
what condition are the vaders? do you have pics? and the most important...how much?