NO Pm's, PLEASE.


I cant give this car away:(
http://i81.photobucket.com/albums/j222/qcyacht/IMG_0340.jpg

PHOTOS BEING ADDED
1.obd1 s52 with all new sensors, valve cover gaskets, intake mani gaskets, exhuast gaskets, and professional conversion (welded dipstick tube, modified valve cover, modified pcv barb, turner coolant adapter, sensor wiring adapter). 3,999.00 68000 miles at time of install, 8k miles installed in my car so around 74k total. WBSCK9334WLC86567
http://i81.photobucket.com/albums/j222/qcyacht/IMG_0296.jpg

2. Kinesis k18's (inquire) 2.000.00
http://i81.photobucket.com/albums/j222/qcyacht/IMG_0041.jpg

3. Brembo gt 355mm bbk black calipers.
1600.00 (new hawk hp+ pads) One rotor ring has a scored rotor ring, works fine as is. Caliper finish is soft from brake fluid.

4. Vorshlag sportline coilovers 350 front 400 rear 12 way top mount adjustable monotube shocks 3,000 miles of use, no track days! 900.00
http://i81.photobucket.com/albums/j222/qcyacht/DSCN1882.jpg
http://i81.photobucket.com/albums/j222/qcyacht/FSCN1895.jpg

5. 3.38 diff low miles bought from track masters owner ('Doug Gale's) brothers low mileage m3/4 auto, he went with a 3.15 for better fuel consumption.
This is a GREAT UPGRADE to a 3.23 and a AWESOME improvement over the 3.15. Output shaft seal leak slightly, an easy gasket change. 685.00

6. Remus exhaust low low miles, great finish, great sound!
425.00
http://i81.photobucket.com/albums/j222/qcyacht/remus3.jpg

7. Intake, injectors, and turner tuning for a maroon 413 ( blue top 24lb injectors w/ under 15k miles of use. Simota groupe m style 3.5" carbon intake.
540 hfm. Silicone hump connector. New oem boot stretched to 3.5")
650.00

8. zf trans from a 328i bought from bav auto recycling. This trans is perfect!
New sachs clutch, release bearing, throw out bearing, used s52 dual mass fly wheel. 800.00

9. m3 rear bumper with smoothed moldings painted carbon black. I has a few minor inperfections. refer to photos. 200.00
http://i81.photobucket.com/albums/j222/qcyacht/IMG_0411.jpg

10. m3 front bumper with new mesh painted cosmos black, a few rock chips and a scratch. refer to photos. 185.00

11. twisty side skirts, painted shwarz black. Scratch and a gouge on the drivers side, passenger side is perfect! 185.00 refer to photos.

12. Vaders. drivers in good shape bought has a darker headrest. passenger side has cracks and a split seam. 375.00 for both.

Thats it for now.

Are you going to be selling the front fenders at some point?

I think I may keep the shell for a project down the road.

are you selling the mid pipe?

are you selling the mid pipe?

Yeah
I forget how much I have in it, In think around 150.00

It was from a auto m3/4 with around 60k. Passed smog perfectly.

is it obdII?

Its a converted obdII midpipe, the post cat holes were plugged with bolts and there was a bung welded pre cat. You can take on of the bolts and plug the pre cat hole.

pm sent

how much for tail lights?

im local, intake and tails?
i can give you my stock???

*edit*
sorry not local, but still 7 hours away >.< haha

Tails are not for sale yet. I also think I may have cracked the reverse light socket at some point, I have to check it.

Brakes are sold.

Where is Marin at? Can I pick up the mid pipes?

how much for the complete drivetrain? Engine, trans, diff, wiring harness, & DME? PM me I am very interested.

how much for the complete drivetrain? Engine, trans, diff, wiring harness, & DME? PM me I am very interested.

Dude, you should just buy the car!
J/K sorta:shifty Let me figure it in and get back to you. Actually would you be interested in the software and intake/fuel hardware?

Where is Marin at? Can I pick up the mid pipes?

Marin is next to frisco-

pms sent.

Pics of seats?

Pics of seats?
http://i81.photobucket.com/albums/j222/qcyacht/IMG_0355.jpg

what going on with the driveshaft?

what going on with the driveshaft?


Update-
Whole manual swap is pending sale, so anything to do with the trans will not be available.

Seats and diff pending sale.

coilovers pending sale.

BBK SOLD.

How about a pic of the front bumper.

How about a pic of the front bumper.

http://i81.photobucket.com/albums/j222/qcyacht/IMG_0086.jpg

http://i81.photobucket.com/albums/j222/qcyacht/IMG_0085-1.jpg

http://i81.photobucket.com/albums/j222/qcyacht/IMG_0087.jpg

The bumper should be painted..

Bumpers and skirts are sold

4 door moldings for sale

bump

I so want you S52 Obd1 to drop in my e30!!

Great price!!!

I so want you S52 Obd1 to drop in my e30!!

Great price!!!

Thanks! The engine has been sold and money has been sent.

Do you have the midpipes? Please email me cjones323 at gmail.com thanks.

He sold the whole exhaust system

what about those wheels on there?

How much for just the flywheel? (if your willing to seperate)
How much for the clutch assembly? (again " " '' )

still got that diff?

4 door moldings for sale

Are these M3/4 mouldings? How much for the turn signal indicator switch and OBC "pigtails" wiring harness?

The moldings may be sold with the car.. I will keep your posted

Sold the diff yet?

entire driveline is sold

corners and tails are for sale, I broke the reverse light socket, a hot glue or super glue fix..
110.00 for the set

would you sell just the front coilovers? thanks

please pm me back

coil overs were the second thing sold, sorry.

can i buy the passenger fog and bracket?