cragg56
01-30-2008, 10:49 PM
Well as you guys know I bought a m52 a while back and was going to rebuild it. Due to some financial reasons (I made some money) the rebuild went down the drain and I am moving on to larger things. s52 ;).
So I have an entire m52 2.8l and all the parts. Only thing I don't have is wiring harness and acc. Also the motor has been completely disassembled.
Also mileage is unknown as the tags on the head fell off. I could not guestimate the mileage on the car, but when we took it apart the cross hatch in the cylinders was still present and the main/rod bearings had little wear. The only information given was that the motor was a 97.
Let me know what you might need and I can cut you a deal. Here is a picture of the motor.
http://i53.photobucket.com/albums/g45/crcragg/M52/IMG_0986.jpg
Here is a list of the majority of the parts for sale. All prices are OBO
Only Parts Listed are Available
Valve Cover - $40
Intake Manifold - $25
Throttle Body w/ TPS - $30
ASC Throttle body $15
Fuel Rail w/ 21.5# injectors - $85
Head Sold
Cams - $40
Cam Trays - Sold
Lifters - $100
Vanos - $80
Vanos Solenoid - $35
Pistons - $50 Sold
135mm rods - $75 Sold
Crank 84mm stroke - $75 Sold
Block Sold
Oil Filter Housing - $45
Knock Sensors - $35 Sold
02 Sensors - $25
Oil Splash Gaurd - $10
Oil Pump - $50
21.5# injectors - $70
OBDII Headers - $75 (Can weld for OBDI use for $25)
SIDE NOTE: I will hopefully have a complete m50 with m3 cams approx 110k miles on it for sale mid march if anyone is interested. It will also come with a sachs stage 2 clutch(approx 10k miles) and remanufactured manual trans(approx 20k on it, but seems to have a bit of a whine)
So I have an entire m52 2.8l and all the parts. Only thing I don't have is wiring harness and acc. Also the motor has been completely disassembled.
Also mileage is unknown as the tags on the head fell off. I could not guestimate the mileage on the car, but when we took it apart the cross hatch in the cylinders was still present and the main/rod bearings had little wear. The only information given was that the motor was a 97.
Let me know what you might need and I can cut you a deal. Here is a picture of the motor.
http://i53.photobucket.com/albums/g45/crcragg/M52/IMG_0986.jpg
Here is a list of the majority of the parts for sale. All prices are OBO
Only Parts Listed are Available
Valve Cover - $40
Intake Manifold - $25
Throttle Body w/ TPS - $30
ASC Throttle body $15
Fuel Rail w/ 21.5# injectors - $85
Head Sold
Cams - $40
Cam Trays - Sold
Lifters - $100
Vanos - $80
Vanos Solenoid - $35
Pistons - $50 Sold
135mm rods - $75 Sold
Crank 84mm stroke - $75 Sold
Block Sold
Oil Filter Housing - $45
Knock Sensors - $35 Sold
02 Sensors - $25
Oil Splash Gaurd - $10
Oil Pump - $50
21.5# injectors - $70
OBDII Headers - $75 (Can weld for OBDI use for $25)
SIDE NOTE: I will hopefully have a complete m50 with m3 cams approx 110k miles on it for sale mid march if anyone is interested. It will also come with a sachs stage 2 clutch(approx 10k miles) and remanufactured manual trans(approx 20k on it, but seems to have a bit of a whine)