i have 2 e30s that i am going to be parting out both are the 325 and both are 5speed, one of them i am going to part out only the things that are not needed on it sk it can be made into a track car then i will sell it off after that unless you would want it as it is, if you need a part let me know thanks

bump

Oil pan and pump?

rear bumper impact strip?

how much for tranny

how much for tranny
200 p/s thanks

interior colour and cloth types? need some headrests.

interior colour and cloth types? need some headrests.
one of them has the black leather in it( might be swaping that out into my IS) and the other has the tan vinale

Pics?

Pics?
what ones do you need and i will get them to you

bump

need oil pan an pump plzzzzzz

differentials???

black window switches shipped to J6V1A4, Lachenaie, Quebec, Canada

year and color of both? Thanks

lsd ratios?

i am off this weekend so i will get the parts off and get the info on the diffs for every one thanks

need front and rear under bumper skirts and both sides under door body trim.

patosdream: give me a few days and i will have them out for you hows 60 p/s

metaltildeth: i have 6 of them i can get them to you for 17shiped

bavauto: the one diff that i am selling from one of the cars is a 2.93 with no lsd

jakeG: not to sure what you mean but if you go to realoem.com send me the link of what you need and i will pull it for you

thanks all

jakeG: not to sure what you mean but if you go to realoem.com send me the link of what you need and i will pull it for you


I am a newbee here and the "system" won't let me cut and paste

What I need I believe is called the apron.What it is, is the outer body
parts below the bumpers, front ( the thing that always hits the parking bumpers) and rear.
I also need the exterior kick panels for both sides.
Former owner removed all this stuff and replaced it with
cheap "ground effects" if that is any help.

If you still have questions as to what I need, please PM me a #
where you can be reached.

bump

How much for the rack and pinion? What conditions are they in? Are the boots slit? Thanks.

How much for the rack and pinion? What conditions are they in? Are the boots slit? Thanks.
i took a look at the rack it turns great and the boots are not cut, its still in the car right now so let me know thanks

I need a shift knob and front drivers side plastic molding that goes on the metal bumper. If thats a pain, then just the shift knob. Say 10 bucks shipped to 19090?

I need a shift knob and front drivers side plastic molding that goes on the metal bumper. If thats a pain, then just the shift knob. Say 10 bucks shipped to 19090?
shift knob i dont have but i do have the molding, which one do you need the small rectangle or the long one(turn sig)

i am in need of a gauge cluster or si board that works for a 325e. and two front seatbelt catches.

i am in need of a gauge cluster or si board that works for a 325e. and two front seatbelt catches.
you have a pm

Ok, I just need the steering knuckle, not the rack; and I also need an O2 sensor. Those are the two parts I am looking for. I need the O2 sensor on an 86 325e, so will the ones from these cars work on this model? Let me know, PM me. Thanks.

bump

rubber circular boot that sits under the shift boot in the opening??


please pm!!!

hows the motor/ tranny if the other guy doesnt buy it? also the interior? any pics?

hows the motor/ tranny if the other guy doesnt buy it? also the interior? any pics?
the one tranny that i am selling is good, as for the interior only one of them is any good and that is in black leather which i am going to swap out in my is but i will have a tan leather for sell then

how about the door arm rests on the car with tan interior? are they in good shape, not faded? let me know

they are in good shape

gauge cluster?

gauge cluster?
i have one i think the od says around 130k on it let me know thanks

bump need parts gone all parts make offer on

you still have the turn signal??

if so whats the price?

I need the rear shock/strut connection to the emerceny brake. The parts to the emerceny brake..where the shoes connect to.

what year I need a front bumper and front valance form a 89-91 car lmk thanks

you still have the turn signal??

if so whats the price?
do you mean the lens of the turn sig arm on the collum?

Do u have a oil pan?? how much shipped to 37122??

Do u have a oil pan?? how much shipped to 37122??
i will soon i just have to finish pulling the motor out to get to it

how long do u think that will be? i may have another one im getting.

tool kit? how much to 98230?
marksv4 at yahoo dot com

How Is the carpet in the one with the black int.? If good could you send a pic or two.Along with the price to tint.king@yahoo.com
Thanks

tool kit? how much to 98230?
marksv4 at yahoo dot com
sorry no tool kit

do you have both control arms w/ bushings? how much shipped to 94903?

325e gauge cluster needed also do you still have it...the one that has 5krpm tach

interested in a 2dr rolling chassis man send me a pm asap. i'm out for blood here so have pics d:

e30 ac parts got any email me at turbochargedv8@mail.com