View Full Version : AA stage 2 SC arrived today!!!!


MdMcoupe
01-25-2008, 09:31 PM
First off let me thank Marco...(Marco1119 here on Bimmerforums). He is a supporting vendor for AA on Bimmerforums. He can get you the CHEAPEST prices on AA stuff. I saved almost $600 on the AA stage 2 buying it thru Marco. I was in constant touch with him on the phone, and he made sure everything was done correctly!! Thanks Marco!! If anyone wants anything from AA, get in touch with Marco.

I didn't know Marco from a hole in the ground at first. After many months of trying to figure out which way to go, I felt safe enough to Pay Pal the man almost 7k!!! :D

I bought Turner's cam kit back in April, but after a couple months I wanted more power.

So I figured BEFORE I get married I should buy a supercharger, and while I'm at it buy the STAGE 2 setup.

I plan to finish my M50 install tomorrow, drive the car a couple days, and start on the SC install.

I will let you all know how it goes. From what I understand there isn't too many Mcoupes with a stage 2.

http://i56.photobucket.com/albums/g177/mdmcoupe/P1010021.jpg


http://i56.photobucket.com/albums/g177/mdmcoupe/P1010028.jpg


http://i56.photobucket.com/albums/g177/mdmcoupe/P1010022.jpg


http://i56.photobucket.com/albums/g177/mdmcoupe/P1010023-1.jpg


http://i56.photobucket.com/albums/g177/mdmcoupe/P1010024.jpg


http://i56.photobucket.com/albums/g177/mdmcoupe/P1010025.jpg


http://i56.photobucket.com/albums/g177/mdmcoupe/P1010026-1.jpg


http://i56.photobucket.com/albums/g177/mdmcoupe/P1010027.jpg


http://i56.photobucket.com/albums/g177/mdmcoupe/P1010029.jpg


http://i56.photobucket.com/albums/g177/mdmcoupe/P1010030-1.jpg

vr4boy
01-26-2008, 12:17 AM
looks really good:buttrock
congrats on the purchase!
another fellow marylander going FI via s/c:redspot

i went from this:
http://img.photobucket.com/albums/v345/vr4boy/m3%20twinscrew/newfolder6296.jpg

to this(stg 2 twinscrew-started the swap today):
http://img.photobucket.com/albums/v345/vr4boy/m3%20twinscrew/newfolder6326.jpg

Gbauer
01-26-2008, 12:49 AM
Looks like fun! I'll probably do the same in a year or two...

bmwNOW
01-26-2008, 03:35 AM
damn that looks amazing. where are you guys at in Maryland? i need a free ride in those cars lol

1996BMW328I
01-26-2008, 09:49 AM
I smell SM2 domination!!!

Congrats Jason. I am one jealous man.

MdMcoupe
01-26-2008, 10:01 AM
damn that looks amazing. where are you guys at in Maryland? i need a free ride in those cars lol


I am in Aberdeen.

MdMcoupe
01-26-2008, 10:02 AM
I smell SM2 domination!!!

Congrats Jason. I am one jealous man.


Until I blow the car up....:(


That TS looks nice, where in Maryland are you?

Gbauer
01-26-2008, 10:37 AM
I'll help on the install if you want it.

bmwNOW
01-27-2008, 05:42 PM
me? Towson/Baltimore

stimpee
01-27-2008, 08:14 PM
looks really good:buttrock
congrats on the purchase!
another fellow marylander going FI via s/c:redspot

i went from this:
http://img.photobucket.com/albums/v345/vr4boy/m3%20twinscrew/newfolder6296.jpg

to this(stg 2 twinscrew-started the swap today):
http://img.photobucket.com/albums/v345/vr4boy/m3%20twinscrew/newfolder6326.jpg

Excellent choice on the Twin Screw!

I hear that a really cool guy developed it...

;);)

vr4boy
01-27-2008, 10:28 PM
Until I blow the car up....:(


That TS looks nice, where in Maryland are you?

in pasadena,md.:)
did you start your installation already?
hardest part on mine was putting in the injectors sp the rear most one.
i had to remove the whole ts again and mount them on the bench....pretty much almost done on mine...



Excellent choice on the Twin Screw!

I hear that a really cool guy developed it...

;);)
thanks!
yes,did a lot of research,reading and dreaming until one came along and couldn't resist the deal...
correct about the cool guy who help develop it and i know,that'll be you(stimpee)!
hope we could all meet one of these days at a local bmw meet(hopefully in spring).
can i pm you with some pointers in tuning and possible trouble shooting if any down the road?

Jackcat559
01-29-2008, 07:00 PM
Welcome to FI!!!!!!

Charisma
01-29-2008, 09:03 PM
me? Towson/Baltimore

Where at? PM me if you need. I live just outside of Towson.

bmwNOW
01-30-2008, 02:27 AM
Where at? PM me if you need. I live just outside of Towson.


right off kenilworth drive, less than 5 minutes from Towson campus. im a junior there

joenationwide
01-30-2008, 01:11 PM
Wow. I can't keep up with that. Did Brian pressure you to buy that so youz guyz could go to Nationals?

nick325xit 5spd
01-30-2008, 01:42 PM
Wow. I can't keep up with that. Did Brian pressure you to buy that so youz guyz could go to Nationals?
I'm desperately resisting the urge.

joenationwide
01-30-2008, 02:33 PM
I'm desperately resisting the urge.

Resisting which urge? The urge to:
A. Keep up with Jason and go FI?
B. Go to Nationals?
C. Have Brian pressure you?

nick325xit 5spd
01-30-2008, 03:57 PM
Resisting which urge? The urge to:
A. Keep up with Jason and go FI?
B. Go to Nationals?
C. Have Brian pressure you?
I definitely want Brian to pressure me.

Tom153
01-30-2008, 04:55 PM
Very nice!
I've got a Stage 1 laying in the basement, waiting to be installed :)
We should have a FI BMW meet once the weather get a bit warmer. I know there are quite a few of us in the area.

MdMcoupe
02-01-2008, 10:27 AM
Scott and Nick you guys are too funny!!!!


Took off work today, starting install. ;)

Charisma
02-01-2008, 12:34 PM
right off kenilworth drive, less than 5 minutes from Towson campus. im a junior there

Surprise surprise... Towson woods? I got jumped there back in November. :rolleyes

joenationwide
02-01-2008, 01:20 PM
Scott and Nick you guys are too funny!!!!


Took off work today, starting install. ;)

We want rides at next BMWCCA autox! GL with the install, man! This weekend should be nice (today not so much.) :D

nick325xit 5spd
02-01-2008, 01:28 PM
We want rides at next BMWCCA autox! GL with the install, man! This weekend should be nice (today not so much.) :D
No shit. :)

Tom153
02-01-2008, 02:01 PM
Good luck with your install!
I'm putting mine in as we speak :)

http://i28.tinypic.com/ohjvwm.jpg

I've already got the injectors in and am about to connect the bracket along with the blower. If you have any questions about the fuel rail/injectors feel free to PM me. I was able to put new injectors in without disconnecting any fuel lines.

MdMcoupe
02-01-2008, 10:00 PM
No small task. At least not putting a stage 2 setup on an Mcoupe. NO ROOM! If you think it is tight under the hood of an M3 try a Z.


Slow process....

http://i56.photobucket.com/albums/g177/mdmcoupe/P1010004-1.jpg

Tom153
02-02-2008, 02:22 AM
Just finished it up, but I didn't have enough traction fluid to fill the system so I couldn't even take it out for a spin :(

Looks like you are almost done too, good luck with it!
BTW, if you are having problems figuring out where the traction fluid reservoir goes, it connects to the bracket that hold the AC refrigerant onto the frame rail. Took me a while to figure it out because the directions don't mention it and the pics aren't that big.

MdMcoupe
02-02-2008, 10:57 AM
Just finished it up, but I didn't have enough traction fluid to fill the system so I couldn't even take it out for a spin :(

Looks like you are almost done too, good luck with it!
BTW, if you are having problems figuring out where the traction fluid reservoir goes, it connects to the bracket that hold the AC refrigerant onto the frame rail. Took me a while to figure it out because the directions don't mention it and the pics aren't that big.



Boy that was quick. There is NO way in the world I will be done this weekend. It will take most of of today just to remove the bumper and grind all the metal bumper shocks, and the aluminium to fit the intercooler. Oh and my kit came with a SPAL electric fan that has to be mounted, since the stock one takes up too much room up front.

Also I have to put M3 power steering lines in my car since the Mcoupe lines are in the front around the stock electric fan, right where the intercooler goes. We also have to finish relocating the power steering resivior since we have to drain all the lines, and with all the new SC plumbing you would NEVER get to the resivior again.

All kinds of little @#$ that will take time, but I am in no rush.

Let me see some detailed pics of what your's looks like finished.

Thanks
Jason ;)

Motorsport3
02-02-2008, 05:31 PM
Just finished it up, but I didn't have enough traction fluid to fill the system so I couldn't even take it out for a spin :(

Looks like you are almost done too, good luck with it!
BTW, if you are having problems figuring out where the traction fluid reservoir goes, it connects to the bracket that hold the AC refrigerant onto the frame rail. Took me a while to figure it out because the directions don't mention it and the pics aren't that big.

I just saw your PM about the traction fluid. I'll check now...

Motorsport3
02-02-2008, 05:38 PM
I have about 1/8 of the bottle left over.

I don't know if that will help but you are welcome to it.

Motorsport3
02-02-2008, 05:45 PM
So I figured BEFORE I get married I should buy a supercharger, and while I'm at it buy the STAGE 2 setup.

I plan to finish my M50 install tomorrow, drive the car a couple days, and start on the SC install.

I will let you all know how it goes. From what I understand there isn't too many Mcoupes with a stage 2.

http://i56.photobucket.com/albums/g177/mdmcoupe/P1010021.jpg


http://i56.photobucket.com/albums/g177/mdmcoupe/P1010028.jpg


http://i56.photobucket.com/albums/g177/mdmcoupe/P1010022.jpg


http://i56.photobucket.com/albums/g177/mdmcoupe/P1010023-1.jpg


http://i56.photobucket.com/albums/g177/mdmcoupe/P1010024.jpg


http://i56.photobucket.com/albums/g177/mdmcoupe/P1010025.jpg


http://i56.photobucket.com/albums/g177/mdmcoupe/P1010026-1.jpg


http://i56.photobucket.com/albums/g177/mdmcoupe/P1010027.jpg


http://i56.photobucket.com/albums/g177/mdmcoupe/P1010029.jpg


http://i56.photobucket.com/albums/g177/mdmcoupe/P1010030-1.jpg


Good lord!! Stage 2 M Coupe!?!

That is going to be mental to say the least!! :buttrock

Congrats!

MdMcoupe
02-03-2008, 09:51 AM
HA HA "Mental"

Lot of work done, lot more to go.....

http://i56.photobucket.com/albums/g177/mdmcoupe/P1010006-2.jpg

1996BMW328I
02-03-2008, 09:53 AM
HA HA "Mental"

Lot of work done, lot more to go.....

http://i56.photobucket.com/albums/g177/mdmcoupe/P1010006-2.jpg

That looks wimpy ...

MdMcoupe
02-03-2008, 10:12 AM
That looks wimpy ...




:(:(

1996BMW328I
02-03-2008, 10:26 AM
I hear voices ... and they are telling me about the other SM2 cars wimpering ...

1996BMW328I
02-03-2008, 10:26 AM
:evil2:evil2:evil2:evil2:evil2
:evil2:):):):)
:evil2:evil2:evil2:evil2:)
:evil2:):):):)
:evil2:):):):)

1996BMW328I
02-03-2008, 10:26 AM
:evil2:evil2:evil2:evil2:evil2
:):):evil2:):)
:):):evil2:):)
:):):evil2:):)
:):):evil2:):)

1996BMW328I
02-03-2008, 10:27 AM
:evil2:evil2:evil2:evil2:)
:evil2:):):):evil2
:evil2:):):):evil2
:evil2:):):):evil2
:evil2:evil2:evil2:evil2:)

MdMcoupe
02-03-2008, 10:33 AM
That was cool!!!! :lol:lol

Don't know about the FTD thing, but thanks! ;)

1996BMW328I
02-04-2008, 03:59 AM
So how's the install coming along? Any more progress today?

sKunkman
02-04-2008, 01:22 PM
So how's the install coming along? Any more progress today?
I think someone is getting aroused at the thought of running legitimately fast in ASP.

etasport87
02-04-2008, 07:48 PM
rob, was the AA on the yellow car when I saw it back in Sept? I'm really hoping to put some FI to the m50 in the summer time.

stimpee, the m50 is still running strong, has about 20k more miles on it now. Sure is a screamer though, with just chip, and headers its running with s50s

vr4boy
02-04-2008, 10:58 PM
[quote=etasport87;12004477]rob, was the AA on the yellow car when I saw it back in Sept? I'm really hoping to put some FI to the m50 in the summer time.
it was pretty stock that time-just had an AA cai.
i went to a c30 then the ts came along-i just finished the final leg of the iinstall today(throttle cable,bled the stgII cooler etc)...now,just waiting for the ecu from active w/c is coming tomorrow:buttrock

putting the c30 in the e30m3 s52 car for kicks:)

vr4boy
02-04-2008, 11:00 PM
HA HA "Mental"

Lot of work done, lot more to go.....

http://i56.photobucket.com/albums/g177/mdmcoupe/P1010006-2.jpg

nice clean install!!! looking good:buttrock:buttrock:buttrock:redspot:redspot:re dspot