jibbajabba
01-11-2008, 09:41 PM
From their website:
Our billet aluminum rear sway bar mount kits solve the problem of the e30's weak sway bar mount. If you use a sway bar larger than stock, the body mount will fail sooner or later. If you get under the car and look at how it's made, you will understand. If you wait until the mount fails the fix is much more difficult. Our billet aluminum mount attaches to the stock piece but also has 2 bolts through the trunk floor with a backing plate inside the trunk. Installation is easy all you need is a drill and 8mm (5/16) bit. You can even install them without removing the sway bar. Kit includes all hardware required.
Bushings are for the Suspension Techniques sway bars or any other 19mm rear bar.
Brand new $75 shipped
Our billet aluminum rear sway bar mount kits solve the problem of the e30's weak sway bar mount. If you use a sway bar larger than stock, the body mount will fail sooner or later. If you get under the car and look at how it's made, you will understand. If you wait until the mount fails the fix is much more difficult. Our billet aluminum mount attaches to the stock piece but also has 2 bolts through the trunk floor with a backing plate inside the trunk. Installation is easy all you need is a drill and 8mm (5/16) bit. You can even install them without removing the sway bar. Kit includes all hardware required.
Bushings are for the Suspension Techniques sway bars or any other 19mm rear bar.
Brand new $75 shipped