This was a little too much for my 1990 325i to pass smog, so I had to go back stock...

Ported and polished completely rebuilt head (K&M Performance Restorations) with Schrick springs and rockers. Includes exhaust manifolds and valve cover. Ready to bolt on.

Schrick 288 cam (I think... I had ordered a 272 but after it failed emissions, the tech that put it in said that I should have expected that out of a 288... if there is a way to identify and tell for sure, please let me know) Car had nothing to 4000 rpm then pulled like a banshee as far as I wanted to wind it... cam is already installed in the head.

Both with under 4000 miles on them.

M30 AFM (the plug and play model... car passed emissions with it but it's really unneeded for a stock setup) bought used; perfect running condition

K&N copy air filter

19# Ford injectors (used, untested... I left the other set of 19#ers in the car)

$1200

Thanks!

Bill
Frederick, MD

http://fnader.com/images/ (http://fnader.com/images/)

Huge detailed pix above in the P1000 series (other pix are of the E30 for also for sale). If you want to see something specific please let me know.

Bill

I've now been told that these are indeed stock rockers, not aftermarket. I paid for new rockers when I did the head; I wrongly assumed they came with the Schrick spring kit and were aftermarket.
Bill

Price reduction to a flat $1000 for the lot. Or make me a serious reasonable offer.

Bill

browsing for upgrade ideas for my eta. Not sure I want to go through an e to i swap..but you ARE fairly local. I may be back. Bump anyway GL.

Have huge detailed pix and invoice for head work I can send to anyone interested. (Web page lost my postings) Will sell head without AFM for $900. Also have stock cam and old lifters which are included...

Needs to go!

Bill

Do you have any interest in sellng everything but the cam that is in the head? and if so how much shipped to 11706?

Thanks,

Chris