View Full Version : Help need fuel injector clip


MGW540i6
01-06-2008, 10:15 PM
I just replaced my valve cover gasket and in the process lost one of the electrical clips on the fuel injector. Does anyone know where I can get another one?

konarider98
01-06-2008, 10:29 PM
Take a look here, i might have one i could send you, or get a good picture of it, or whats missing.

http://www.realoem.com/bmw/partgrp.do?model=DE53&mospid=47588&hg=61&fg=15

jamesdc4
01-06-2008, 10:44 PM
Isn't it more likely one of these?

http://www.realoem.com/bmw/showparts.do?model=DE53&mospid=47588&btnr=12_0588&hg=12&fg=31

From this group...

http://www.realoem.com/bmw/partgrp.do?model=DE53&mospid=47588&hg=12&fg=31

MGW540i6
01-06-2008, 10:55 PM
Thanks for the response. None of the clips match. If you have the Bentley service manual it is located on 117-80. Sorry it is not a very good picture but it is the best that I have. Should have taken a picture when I had the others off.

jamesdc4
01-07-2008, 05:04 AM
Thanks for the response. None of the clips match. If you have the Bentley service manual it is located on 117-80. Sorry it is not a very good picture but it is the best that I have. Should have taken a picture when I had the others off.
Is it the ignition coil mounting fastener or the wire lock clip?

MGW540i6
01-07-2008, 08:16 PM
Thanks everyone for your response, my indy shop had one. I would post a picture but for some unknown reason I can not.